- Видео 85
- Просмотров 383 910
Werner Garage
США
Добавлен 21 янв 2020
SXS Modifications, Off-Roading, Boating, RV Projects More..
Sanding, Repairs and Gelcoat On our Free Sailboat
In this video we will be sanding off the old bottom paint on our free Sailboat "Time Out" start fiberglass repairs and attempt to roll gelcoat! #wernergarage #timeoutsails #totalboat
Find our content helpful or just want to help out the channel? Consider donating on Patreon:
patreon.com/WernerGarage?Link
Need a helmet! Go to our Amped Off-road Affiliate page and support our channel!
ampedoffroad.com/?ref=Wernergarage
Find our content helpful or just want to help out the channel? Consider donating on Patreon:
patreon.com/WernerGarage?Link
Need a helmet! Go to our Amped Off-road Affiliate page and support our channel!
ampedoffroad.com/?ref=Wernergarage
Просмотров: 56
Видео
Sailboat Restore, Uncovering The Issues!
Просмотров 19621 день назад
Follow along as we restore our practically free 1992 Macgregor 26S Sailboat. Stripping the bottom to find out what real damage exists. #wernergarage #timeoutsails #citristrip Find our content helpful or just want to help out the channel? Consider donating on Patreon: patreon.com/WernerGarage?Link Need a helmet! Go to our Amped Off-road Affiliate page and support our channel! ampedoffroad.com/?r...
We Get A Sailboat for Basically Free!
Просмотров 849Месяц назад
Follow along as we start our first step in restoring a sailboat to use here in San Diego. A basically free MacGregor 26S Trailer Sailer! #wernergarage #superclean #timeoutsails Find our content helpful or just want to help out the channel? Consider donating on Patreon: patreon.com/WernerGarage?Link Need a helmet! Go to our Amped Off-road Affiliate page and support our channel! ampedoffroad.com/...
Pirates Cove Colorado River Trip!!
Просмотров 346Месяц назад
We take our 25' World Class Warlock to Pirates Cove in Needles California on the Colorado River! #wernergarage Find our content helpful or just want to help out the channel? Consider donating on Patreon: patreon.com/WernerGarage?Link Need a helmet! Go to our Amped Off-road Affiliate page and support our channel! ampedoffroad.com/?ref=Wernergarage
RV Boat Tow and Launch!
Просмотров 1,6 тыс.Месяц назад
Follow along as we tow our 25' Warlock power boat behind our 32' RV to the lake and Launch it at the launch ramp in Pirates Cove! #wernergarage Find our content helpful or just want to help out the channel? Consider donating on Patreon: patreon.com/WernerGarage?Link Need a helmet! Go to our Amped Off-road Affiliate page and support our channel! ampedoffroad.com/?ref=Wernergarage
Boat Prep for the Season
Просмотров 972 месяца назад
We prep the Warlock for our boating season! Oil Change, cleaning and some prep work before our 1st River trip of the season! #wernergarage Find our content helpful or just want to help out the channel? Consider donating on Patreon: patreon.com/WernerGarage?Link Need a helmet! Go to our Amped Off-road Affiliate page and support our channel! ampedoffroad.com/?ref=Wernergarage
RV Inverter and Transfer Switch Upgrade and Install!
Просмотров 4003 месяца назад
In this video we upgrade our RV Inverter from a modified to a pure sine wave Inverter and add a transfer switch! #wernergarage Inverter a.co/d/i7w13nu Transfer switch a.co/d/ih72Sb8 Find our content helpful or just want to help out the channel? Consider donating on Patreon: patreon.com/WernerGarage?Link Need a helmet! Go to our Amped Off-road Affiliate page and support our channel! ampedoffroad...
Mother Clutcher 1 Year Review!
Просмотров 3,2 тыс.4 месяца назад
Here it is a full Desert Season One Year Review of the Mother Clutcher Clutch for the Polaris RZR XP 1000! Unboxing, Install and real world use! #wernergarage Find our content helpful or just want to help out the channel? Consider donating on Patreon: patreon.com/WernerGarage?Link Need a helmet! Go to our Amped Off-road Affiliate page and support our channel! ampedoffroad.com/?ref=Wernergarage
Quick RZR 800 Top End Rebuild
Просмотров 1,4 тыс.5 месяцев назад
We rebuild the top end on my buddy Jacob's Polaris RZR 800 in one day! #wernergarage Here is the kit we used: www.amazon.com/dp/B0CGMTQZNJ?ref=ppx_pop_mob_ap_share Find our content helpful or just want to help out the channel? Consider donating on Patreon: patreon.com/WernerGarage?Link Need a helmet! Go to our Amped Off-road Affiliate page and support our channel! ampedoffroad.com/?ref=Wernerga...
RZR Rolls! Holiday Weekend Ocotillo Wells
Просмотров 9876 месяцев назад
MLK Weekend at Ocotillo Wells. We head to BlowSand, Devils Slide and More! #wernergarage Find our content helpful or just want to help out the channel? Consider donating on Patreon: patreon.com/WernerGarage?Link Need a helmet! Go to our Amped Off-road Affiliate page and support our channel! ampedoffroad.com/?ref=Wernergarage
RZR Stuck Injector!!
Просмотров 7667 месяцев назад
In this video we repair our RZR XPTS that has a stuck open Injector. Easy instructions how to replace injectors and get your car back to running right!! #wernergarage Find our content helpful or just want to help out the channel? Consider donating on Patreon: patreon.com/WernerGarage?Link Need a helmet! Go to our Amped Off-road Affiliate page and support our channel! ampedoffroad.com/?ref=Werne...
New Years Ocotillo Wells 2024
Просмотров 4217 месяцев назад
We Head to Ocotillo Wells for New Years 2024! Lots of Shenanigans, Rzr break down, some fun jumps and late night fun! #wernergarage Find our content helpful or just want to help out the channel? Consider donating on Patreon: patreon.com/WernerGarage?Link Need a helmet! Go to our Amped Off-road Affiliate page and support our channel! ampedoffroad.com/?ref=Wernergarage
RZR 800 Wiring And Switch Panel
Просмотров 1,2 тыс.7 месяцев назад
In depth installation of AuxPower switch panel, chase bar and lighting for our RZR 800 Build. #wernergarage Chase bar: Lupar 25" LED Chase Light Bar w/... www.amazon.com/dp/B0C37C4K6W?ref=ppx_pop_mob_ap_share Switch panel: Auxpower 8 Gang Switch Panel LED... www.amazon.com/dp/B096XWMJT4?ref=ppx_pop_mob_ap_share Find our content helpful or just want to help out the channel? Consider donating on ...
Glamis Thanksgiving 23
Просмотров 3807 месяцев назад
Better late then never! Follow along for our trip to Glamis for Thanksgiving 2023! Glamis Fab, Lake Glamis and wash 25! #wernergarage Find our content helpful or just want to help out the channel? Consider donating on Patreon: patreon.com/WernerGarage?Link Need a helmet! Go to our Amped Off-road Affiliate page and support our channel! ampedoffroad.com/?ref=Wernergarage
RazorBack Belt Gauge and Blower Fan
Просмотров 1,5 тыс.10 месяцев назад
RazorBack Belt Gauge and Blower Fan
Warlock 25 World Class on Lake Havasu
Просмотров 1,5 тыс.Год назад
Warlock 25 World Class on Lake Havasu
RZR 800 Rebuild Update (The motor is back!)
Просмотров 666Год назад
RZR 800 Rebuild Update (The motor is back!)
New LP Engineering Helmet Pumper for our RZR
Просмотров 573Год назад
New LP Engineering Helmet Pumper for our RZR
Miller Margaret Smith Charles Lewis Jose
Looks easy I could have done this repair in my sleep
looks great. I got a willys and want to do the same stuff. Saving! lol
So satisfying watching the sanding and removal of paint!
Hello, Are you interested in testing our products? We would like to invite you to test the Light Tint Rear Windshield for your 2009 rzr 800
All it needs is some bondo and gorilla glue and you will be ready to sail around the world
🤪
That looks easy I could restore that boat in a day
Get over and get to work Taylor!! 🤣
Looks great brother!
@@HTXRZRREVIVAL thanks car runs awesome!
@@wernergarage7078 where are you based out of ?
@@HTXRZRREVIVAL San Diego so the car goes to Ocotillo Wells and Glamis
Great stuff! We recently started our channel as well! youtube.com/@htxrzrrevival?si=-VE-UXDB9fKMbcNB
Pop Top boats are problematic with leaks
Thanks for the feedback I'm going to see what I can do to seal it up tight. Would have like to have had a non pop top but definitely want to trailer it and the price was right 😎
Must be nice. You are very fortunate to have connections.
No connections just spending to much time on the classifieds!! If you're referring to the Superclean then yes that was very generous of them!
Nice!!!, you can't go wrong with free,, haha
How is the machine holding up after the rebuild, just wondering because of the pricebefore I buy it.
Good! He has only had a few trips on it though but runs strong and no issues!!
*Wheel swap*
Friend, do you have more photos of the installation, you used the hole that the chacis already had, thank you
I will see about taking some pictures but it is a bolt on installation.
I have the same light bar but I do not have the key on an off wire that plugs to the wiring harness which will cause the lights on the switch to stay on leading to a dead battery. I have tried to find that wire that you add on to the bottom of the bus bar but can’t find it. Please help? Thanks for the great video.
So you upgraded tires but bought used wore out ones?? Center treads look so wore i sure hope you dont get icy or snow where you live
So good catch on the tires. At the time I did this, tires were in high demand and extremely overpriced. I picked up some takeoffs. They had quite a bit more tread than you could notice in the video. I'm actually in the process of replacing them. No snow or ice and I took these out to the desert where we Off-road and they actually worked great at a low psi, they were just a cheap temporary fix.
@wernergarage7078 ya I didn't look where you were from and my first thought since I'm from Canada was those will be fun in the winter...lol. Looks nice though ✌️
@@Lefishn haha yeah for sure, they actually had more tread than you could see on video... they are done know and debating between BFG's or Toyos
Not a big deal at all. Like with any rear wheel drive vehicle, you'd only have to be concerned with ramp conditions especially using bunk-style trailers in a tidal area with slick ramps.
Launched our boat with our motorhome all the time. No big deal if you take your time..
Exactly!!! When I posted a pic of me not launching but just towing our boat on an RV forum people lost their minds 🤣🤣
@@wernergarage7078 You can tell you know what you are doing and do a great job. Some people just don't know how to back with their mirrors. Good job..
@jimg2885 thanks man! In full disclosure, my dad had me driving a 34' rv towing a 20' boat on private roads at 14 😎! Thanks for watching and commenting!
I believe the tow length is from the front of the tow vehicle to the rear of the trailer NOT the rear of the boat or drives so basically the taillights at about 5:18 of your video
Thanks Mike! I was curious about the measurement, so that definitely gives me some extra room to be under the limit! 👍
@@wernergarage7078 btw is that an Allante or a Precept?
@@espritmike 2016 precept 29UR (bunkhouse)
Great job. You see motorhomes towing big boats and large race or toy hauler trailers in California all the time. I have been doing it for over 30 years and actually have been over legal length many times. To the river with a boat and PWCs in the summer and to Glamis with a sandrail and quads in the winter. No issues at all except for a blown trailer tire every so often. Have fun and be safe!
Thanks, I agree no big deal! So many people had commented they couldn't believe I was pulling the boat with the RV so figured would show how easy it is... have fun stay safe out there!
Take the 3 feet of extensions off the impact lol
That's what we had sitting around and wanted to clear the coil over...😎
You highly recommend?
So far so good! It has been solid with no issues. Can't beat it for the price.
Can i ask approx how much this mod cost? Looks great and id love to do the same.
So I picked up the Rubican shocks and springs used for just a few hundred dollars. The front leveling kit is from Rough country and was about $100 and the rear spacers were about $150 so you could put everything together for less than $500 if you do the install yourself.
Who made swim platform?
So it was a company called Alumifab Marine, I have more details about it in the video below: ruclips.net/video/z8SwJD56duk/видео.htmlsi=FHXmkh8M2lMBO3wF
I wanted to hear about your belt temps and how you like the Razerback unit. Please share or do another video.
The blower system works well but it does draw some power and if the power goes down it does block airflow so you need to make sure your power system is up to the task when your running all your accessories! When running all my lights it can draw to much power. I have had to manage the power usage but it works well when I don't run everything all at once.
Great video! Thank you for sharing your knowledge.
Thanks for watching! Hope it was helpful!
Did that tpr valve cover install ever come out ?
Soon, it has a bunch of other parts at the same time, finishing up some summer projects but will post that video soon!
I’m installing mine just need help on where to cut and add the coolant return on the hose
@@dodgerchvy6 if you give Greg at TPR a call he can help clarify where you cut. Unfortunately I will not have the video up for a few weeks.
did you add a new adjustable track bar or new control arms with this lift or did it run fine with stock components ?
Totally fine with stock components, rides great and has no issues!
@@wernergarage7078did it also sit level front and back with the icon rear spacer or would you recommend doing the daystar 3/4 rear spacer instead to level it out ?
It's sits fairly level for me, keep in mind the rear springs are for the max tow, front springs are rubicon (which raises the front up a bit over the S)
would have to mount it higher down here in the south because all the water we drive through
Thanks for posting the review,I'm going to be ordering one for my sportsman xp1000 very soon,I've seen a bunch of RZR guys posting positive feedback so I feel pretty confident taking the plunge.
The video helped me out a lot. Did the wood with the cut out as well! Can am sitting on all new 30 inch tires now, thanks for the post!!
Great video! So me tapping into the buss bar just for whips will be fine? Do I need a fuse somewhere in between? TIA
Yep, you should be good! I would still fuse the whips just to be safe. Thanks for watching.
@@wernergarage7078 thanks for the quick response! What size of fuse do you recommend and where should I put it ? TIA
Hello, Are you interested in testing our products? We would like to invite you to test the Side Windows Net for your Can Am X3 Max(if your car year is 2017-2023)
Hi, thank you for the offer. We no longer have any can am X3 Max in our group.
@@wernergarage7078 Hello, thank you let me know.
@@wernergarage7078 Hello, ok, thank you let me know
What's the name of the 2 piece you took off?
Not sure which your referring to, the part that I took off or the old roof I removed?
Looks like the jeep is a max tow. Do you think the rubi springs alone up front will level it with the rear at stock height?
I think so but not 100% sure.
You have a link for this?
factoryutv.net/products/can-am-maverick-x3-dual-clamp-spare-tire-mounts
Hey on the rear tail lights wires witch one out of the three can i use for turn signal
Hi Juan, I have not installed turn signals so I am not sure. Sorry I could not be more help.
Use washers first ,to test the seat hight then cut the spacers.
That's a good way to do it. I decided to cut them proportionately as I wanted adjustability for different drivers but the washer method can really customize it to the specific driver
Would a 2X4 stack work or would it be too narrow/unstable under the jack?
It could but you will need to notch it in the center so it is more stable
Hello, we are a manufacturer from Maiker. We would like to talk with you about more details. How can I contact you?
Great review. Looking for a compressor that is portable and can fill my high pressure truck and trailer tires. This may be the ticket
Thanks for watching. I've had it for a few years now and it works awesome!
Great job🤘
Wow, you ve got a really well-made rzr👍. Like the way you take care of it. Greetings from Russia (14' sportsman 800)
Thanks for the comment! 👍
what do you think about the suspension on the rzr compared to the x3
Oh man great question. So to be fair my XPTS is fairly modified with long travel boxed arms and has Fox podium shocks. My X3 was an XRS with stock arms and better fox podiums with shock therapy springs AND was a 4 seater. The 2 seater to 4 seater comparison is huge and kind of skews by experience as I have only driven a 2 seater X3 a could times. They are both great cars and both suspensions are good, the RZR seems to need a bit more speed in the whoops to get it on step but I think that could be the wheelbase...
Awesome non-riding stuff. The plane and paragliders were cool.
Awesome video I had been looking for a day now before seeing yours. All I wanted to know was how to hook my whip lights to my bus bar! And now the location 😂and you showed all the ways.Thank you.
Glad it helped! Thanks for watching!
How do you know how many PSI you have added when you don't have a gauge showing?
So on the model I have the psi is shown on the remote control. It will show the set psi per side you select and it will show real time the psi as it fills.
Great Job 🤘🤘
Thanks!! Buddy!
What air filter set up is that
I believe it is the dragon fire racing. It was red but I stripped it back to bare aluminum. I don't think they are around any more but it's similar to a ump.