Видео

Nisam siguran, ali OddityRC XI25Pro je dosao sa F7 FC (ne F4), ustvari combo AIO, FC i ESCs (OddityRC F7 40A AIO). Sa XI25Pro apsolutno nema problema, ovo je jedan od najboljih manjih quad-ova u svojoj klasi. Apsolutno se ponasa vrlo blizu svakog 5" custom quad-a koji sam do sada sam napravio, samo sto je u manjem formatu. U zadnje vrijeme nazalost, niti ja niti moja kcerka vise ne letimo XI250Pro, jednostavno iz razloga sto ne mozemo prestati letjeti 5", teze masine. XI250Pro nam sjedi na polici, dok ne bude potrebe da ga jedan dan opet izvucemo na teren :) Nasa verzija XI250Pro je takodjer i 6s, nismo uzeli 4s kada smo ga kupovali. Kod nas je instaliran BlueJay umjesto BLHeli_S, tako da je Dshot ukljucen od pocetka, nikada nismo gasili jer smo zeljeli imati pristup custom filterima.

@@Seii-FPV Hvala na odgovor,u opisu videa sam video daj je f411 40a,no nebitno,danas sam testirao prvi put xi35pro sa ovim f411 kontrolera,sa i bez uključeno dshot,isto malo se čuje da pucketaju motori i kad dajem jači gas ponekad hoće da treska,a i pitao sam drugare,oko toga i taj flight kontroler ima problema sa gyro,tako da ne preporučujem,sad čekam F722 45a Aio,inače da imam i od 5",i volim ga bas,zver a ove zime sam sastavio FlyFish Volador 3.5 skoro isto ko 5" leti,to mi sad omiljeni,i sve na 6s,i još uvek analog + Walksnail uskoro. :)

Korekcija - moja greska. Taj prvi (ovaj na videu) jeste F411. Kupili smo i drugi nedugo poslje njega, potpuno ista konfiguracija kao i taj prvi, samo je drugi iz nekog razloga dosao sa F7. Njegove specifikacije se mogu vidjeti na ovom link-u: oddityrc.com/products/xi25pro-walksnail-avatar-pro-v2-version - sto se tice pucketanja, to sam cuo par puta, ali nikada se nije apsolutno nista desilo lose sa tim Whoop-om. Razgovarao sam sa glavnim kontaktom (Vincent Young) u OddityRC, te mi je rekao da znaju za to, medjutim da to nece izazivati apsolutno nikakve probleme. Poslje toga su mi totalno besplatno poslali nove motore koje su upravo dizajnirali i pustili u promet samo par dana poslje (1405 3200kv), i jos uvijek mi stoje u kutijicama, nisam imao razloga ih koristiti. Ali u buducnosti kada uhvatim vremena, bas cu probati na toj starijoj verziji XI25Pro sa F411.

That's great to hear, I'm glad you're enjoying the upgrade!

If it is, pots would be the way to control fading. I am just not sure which parameter would pots have to control in order to deal with LED rings. Not sure if it's even possilbe. Turning them off is a lot easier. One could always install additional switch somewhere, connected directly to the power supply line for LED rings. But, not sure what we'd gain with that. When flying, I never look at my radio since my face is literally burried in my goggles. And when dealing with radio EdgeTX options, light is not really that intense that would ever feel annoying. It's really quite non-intrusive, but it looks way more intense on video (camera settings). The main reason why I installed LED rings - I needed spacers, and LED rings do exactly the same thing too... plus, they have LED too, it looks cool.

@@Seii-FPV when I switch arm the LCD screen turns off also I can dim using the nob, and I wonder if it is possible to set this with the LED. LEDs look very nice but I would like to have a way to turn them off, the light can attract attention in some cases

As I mentioned, I am not sure if it's possible to find out what is the parameter that controls LED rings through the LED plug inside the Boxer (for controlling fade in/fade out). But, installing a separate momentary switch is super easy. I don't know if anyone did it with Boxer, but I know that @RCVideoReviews did it with Radiomaster TX16s: ruclips.net/video/grcCx1Vz2_g/видео.html

You'll need to find a way to get your hands on compatible cable (check that video description please), or by some miracle find proprietary cable that works out of the box with Dji goggles v2. Once it's connected, you simply chose video in inside the goggle's menu, and that's it. EDIT: even though it's inside the video's description, here is the link to my quick PDF tutorial: tinyurl.com/4yvdk45t

Thank you! It is really beautiful in Tuscany. My family wanted to stay there forever!

@@Seii-FPV se puoi vai in Puglia dal Nord al Sud fai il giro anti-orario: Vieste (FG), Bari (BA), Polignano a Mare (BA), Alberobello (BA), Castellana Grotte (BA) visita le Grotte sotterranee, Locorotondo (BA), Lecce (LE), San Foca (LE), Otranto (LE), Santa Cesaria Terme (LE), Santa Maria di Leuca (LE), Gallipoli (LE), Porto Cesareo (LE), Lido Silvana (TA), Taranto (TA) e' piccola come regione non ci metti tanto☺

I would gladly, but we're back to Croatia already. That video was taken on December 12th. We've planned to go to Sicily at one point, but got some other plans in the mean time and changed our mind the very last minute. I am sure we'll visit again.

Thank you. This one was from Croatia (my motherland), and I kind of like these better, from my other country where I live for the last 23 years (Canada, Wild West): ruclips.net/video/6ek0LhtbCX8/видео.html, and this one ruclips.net/video/i06aFLdyAf8/видео.html

...and fly forever! Thank you for stopping by and taking your time to watch. It looks like you're my neighbor. If I'm correct, the scenery in your video looks a lot like Montana :) I live in South Alberta, almost on the border with Montana :)

@@Seii-FPV oldguyFPV; You got it. I'm in Southwest Montana. I have the whole place to myself. I do not know any other FPV pilot(s), except myself, anywhere around here. I fly anywhere that I want to. Perfect situation for the oldguy!!

That is nice, sounds like FPV heaven!

Over 9000 km in our SUV, Canada and Europe combined. We're planning additional 1800 km soon :)

Ima zelenila, sve je zeleno, cak je i trava svjeza kao da je proljece. Cak i u Rijeci je tako. Samo sto je na putu tamo bio tmuran dan, ali na povratku je bilo sunce cijelim putem.

No, it's a simple packaging foam, and I've simply cut it using scissors. Printing anything would for sure add some weight, and I did not want to do it, especially now when I have AG01 gimbals installed too... they are quite heavier than standard gimbals my radio came with, so whole radio feels little heavier already. Foam I've used in that battery compartment literally has no measurable weight, it's less than half a gram, even lighter. You can see it here: imgur.com/a/YFlNiIV

Thank you for your comment, greatly appreciated. I've fixed it since 1 month after the upload... but unfortunately, RUclips does not allow "replacing" or "updating" the video. I can only delete this one (and lose all the views and people would lose link to this video), and make a re-upload... I am kind of waiting for you tube to allow creators to simply "update" their video, something that Vimeo allows for ages now.

@@Seii-FPV lol, no worries, I was just amazed at the bass 😄 . That will be great, kinda should be possible already as they can cut out parts from copy-write claims. Anyways, still a great video and helpful 👍 thanks

No problem. Yes, all true, and I couldn't agree more with you. I've heard they can, but simply don't want to do it. Apparently, if it ever comes to some kind of dispute over something that's been said or what was shown in videos, they want to have evidence available. But even that is solvable... they can simply keep archive of the previously uploaded versions. I mean how hard is that, it's not like they're lacking the hard drive space :) Anyway, I just listened to this same video on my laptop, and with those lousy laptop speakers, it sounds perfect lol. At least something good :)

I don't have Crush version, so I can't tell. Look here under the "RadioMaster Boxer Crush vs RadioMaster Boxer" section: www.tekrc.eu/shop/transmitters/boxer/radiomaster-boxer-crush-expresslrs

Yes

Thanks 😄

You're very welcome, I'm glad if it helped.

It is even more beautiful in person. I know exactly what he was talking about. There is something about this place, something sacred and you feel it in your heart even just by looking through my drone's camera.

It is amazing! Last 23 years, I'm Canadian, but originally from Croatia (Italy's neighbour to the East), and I've spent driving through Italy for the last couple of days, sleeping in Siena for 2 nights. It's so incredible, I want to live there!

Thanks 😄

Thank you. That's one of my first builds. Last, 6th and 7th ones are way better. Documented here on this channel as well :)

Thank you. Nothing special, just wanted to showcase those fonts I've created for WTFOS.

Thank you for this great info. I am sure it might help to those who own Max version of this transmitter. Unfortunately I don't own Max or Crush version, so not aware of any differences. My Boxer is the version before Crush came out, so this video explains how to do it with "standard" Boxer version.

Thanks! I appreciate it.

Nice job my friend! Are there any files for custom printed Boxer buttons by any chance? I wanted to print something in different colors, and was determined to reverse design buttons, but since I'm travelling all over the Europe at the moment, it's quite difficult to do anything about it. Thank you in advance!

Fantastic! I'm super happy to hear people find this interesting and if it helps at least one person per day, I consider my job on this video successful. Thank you for sharing it with me!

There is tons of videos up on my channel which show my radio of choice. I have TBS Tango II and Radiomaster Zorro, but my main radio is modded Radiomaster Boxer: ruclips.net/video/WbScubajNMg/видео.html

It might be your SD card doesn't have enough free space. You have to put the sounds into exact folder, file hierarchy has to be like original. The only reason why "it wouldn't let you", is the capacity of your SD card.

Tons of different tutorials on YT, but quick Google search reveals amazing explanations by Oscan Liang: oscarliang.com/setup-zorro

Thank you so much! I am happy you enjoyed the video.

You're very welcome, it's great to hear you're enjoying it!

Many thanks!

Thank you. It's all under this video's description. Search for "stick ends" inside the description text to find out more.

Good luck! It's not difficult, just be careful with reconnecting all the wires/connectors.

@@Seii-FPV So, I finally did this mod, and it is amazing! Thanks so much for this easy tutorial man!

You are very welcome and it's my pleasure. I am glad to learn you succesfully did this mod on your controller.

@@Seii-FPV Just one small detail, that you maybe could put into description. Is that the top usb can't fit nicely, you have to rotate the antena 90 degrees. Or sand down one side of it like I did. That would be only small thing, in otherwise so awsome upgrade.

Just a small rotation, maybe as little as 6-10 degrees is enough to move the antenna out of the way. At least with my sviwel design piece, which I mentioned in my video description I ended up using instead of other two options (D̶a̶n̶o̶F̶P̶V̶ and B̶i̶k̶e̶r̶n̶i̶c̶k̶m̶n̶). It really takes as little as couple of degrees to rotate the antenna out of the way, so USB can easily plug into the socket. The thing is, there are various different USB connectors, some are thick, and I do have one of those low profile ones. For those, it's not necessary to turn antenna not even a single degree, they can still plug without any problems.

Sorry, not sure what you meant by "removable end". Whole swivel is supposed to be just one piece. Also, as per my description under the video, I can't recommend first two pieces I've used in this video anymore, that's why links are crossed now. I've designed correct piece with 100% correct clearances, and that is the only one I can recommend at the moment. Link is available in the description.

Thank you. Yes, a lot of work indeed, but rewarding at the end.

It's the GLaDOS sound packs I've made for FreedomTX, EdgeTX, ToolkitRC M7AC and M9 smart chargers. Full packs, not just couple of sounds. All made from scratch. Building process can be seen in this video: ruclips.net/video/XKPzQfoQuD8/видео.html , and qucik demonstration in this one: ruclips.net/video/SBN8CxHSRL8/видео.html