Видео

Sediment , carbon copper (post carbon)and UV is there in mist , suitable for low TDS corporation water supply

Sir waiting for your response.

I do not think mist is without chip filter, pl ask dealer to open n show the filters

U can use any brand only chk technical specifications oh UF , it must be hallow membrane fiber just sticker of UF does mean it's original chk genuine part

Yes

Yes UF shoul must be provided to get clean water

Good if used it will stop 5-10 micron dust particles, other filters life will be improved

@@ashokpatil-technology3977 Thank you Sir for the information 😌

Hp 2.0 kit lagegi , aap ko kis area me chahiye

@@ashokpatil-technology3977 mumbai borivali

@@ashokpatil-technology3977 pr RO vala nahi ai mera machine , UV + uf hai usme combination filter hai uske sath chip hai

Water source ke hisab se hi purifier select karna chahiye Har Mahangi chiz achhi nahi hoti, Check water TDS and source

As per WHO upto 350 TDS is ok for drinking , as we get corporation tap water upto 100TDS so 100-150 TDS good for this RO is not required

As this model is used for corporation water or low TDS water . This low TDS water does not have access metals like Ca Mg Na K CaCO3 etc so does not required rejection pipe. However sediment and carbon consumables to be replaced atleast every year because it stops & accumulates dust particles and Mudd, Activated carbon discharge during this period , carbon pours get blocked .

I suggest best chock with Philips UV-C tube is Philips AC chock, it is very effective

​@@ashokpatil-technology3977 i have modified exactly same as you mentioned in video. I also bought original Kent RO membrane from service centre but tds is not going below 150 i have also blocked tds controller. Water from RO membrane itself is at 150 tds. How many days it takes for membrane to adjust? I have rinsed water 1-2 times but still 150-160tds

UV model kit cost around 2500/-

Regal model is discontinued in sales but with respect to service it is similar to Neo and Astor model.

Not suitable for hard water which normally comes from well or boring . You should go with RO UV UF with TDS conteoller

You can use best quality 1100 iv carbon or activated Original branded carbon

If you have TDS always more than 500+ , u can by aquagurd champ RO +UV model, cost around Rs.9k

Companies make purifiers such that they make money in spares after sales , at the same time if it will not have timer based service reminder , customer will not change consumables filters in time even after 2-3 years. My personal view is that the filter should be jammed if the water quality is poor. It will happen only in good quality filters. Local quality filters will never jam because of poor quality

Sir, basic technical knowledge is important to understand the technical concept , I can try to educate in video as much as possible.

AG Glory is like NEO/Astor model , 2.0 kit will fit , technical will do it.

Any UV +UF purifier le sakte hain . Kent ultra storage with storage 7500 , reset required after around 1 yr. It's for filter change alert only. Or other brand which will have UV Philips and hallow membrane fiber UF ( 0.01 micro ). You can buy with pre filter to stop mudd.

No , in Aquagurd water passes through a quartz glass tube . In Kent water passes through Alluminium iodised metal

@@DIY_NINJA what's your location?

@@deepakkapoor191 No normally UV UF does not have inbuilt pump, If u have low input water pressure then for uV UF with booster pump model.

There is no reset in this model, There is a chip in the front panel and chip comes with a membrane

@@ashokpatil-technology3977 Is pcb bypass possible for Aquaguard genues model?

Hope u bought UV +UF for corporation tap water

@@pravindudharejiya7377 approx 150

@@ashokpatil-technology3977 muje chahiye

Meko 220 kyun bataya?​@@ashokpatil-technology3977

Meko 220 kyun bataye?

@@pihurawat2367 this model is plug n play type. Nothing to do inside, Just connect to water tap n electric socket. Drain water for 5 minutes and then start drinking water

@@shahrukkhan2602depends on problem, very less people do chip level repair

Actually it is not liter based system because it does not have a flow meter. It has a timer based system , around 650 hours it will give alarm and after 700 hours it will block SV UV and pump current .

@@ashokpatil-technology3977 thanks sir, so after 700 hours, I need to buy new Aquaguard ? Or we can replace filter unit to restart the timer?

@@maheshjs4251 You need to change consumable filters .

@@dineshpramki4046 depends on quality of pump, membrane , I think 3-4k . U can discuss with your local dealer

local dealer is asking 2200 for pump of healthcare brand, 2700 for aqua guard ro membrane. are these rates alright?

Yes, drawbacks if pressure will be low , filters will get jammed early , Filter change alarm will come early because timer vs water flow will be less

Filter kit set ASTOR 2.0 ka lagega

Wiring like RO purifier, SV and Pump are connected parallel , chk capacity of SMPS also, it should be minimum 24v 2.5amp

@@vins666 , you have to use below spares seperately Pump FRT RO WITH MH SMPS IF U WANT TO USE TDS CONTROLLER, U MUST USE UF AFTER TDS.

Normally float does get faulty , pl SV it may allowing water to flow when machine off. . Technician can chk n change the faulty part

Left bottom side , u can check in video , white lock is there

Buy UV+UF only for BMC water , pl do not buy RO

@@ashokpatil-technology3977 OK sir.

It can be done if you have a good knowledgeable technician. Who knows that RO works 24v and UV purifier Works on 12v in this model accordingly he has do the connections.

I try to do it asap

please cordinate with 8855811114 for details

Around 8.5k but u can negotiate to get the best price. Installation is free from OEM

We are from nizamabad telangana. Can I order?

I think u can buy it from a local dealer, The installation is free from the company

Local dealer asking 12500

@@msreddy5452 , dealer must not charge more than MRP , if someone is doing it , it's illegal.