Видео

Mehanotehnika trolley

Bavarian Tank locomotive used for suburban passenger trains and local branchline freight, and shunting. "Neibenbahnlokomotiven"

"Ground control to uncle tom" 🎵🎵😂😂

Those 2-6-0's are German.

POLA Water tower/sanding deot, and Coaling tower for steam locos. The water tower by itself may be Tyco-pola.

Plus I want the Dewitt Clinton and John bull

I wish I got that lot I would love the Hogwarts and Thomas and Percy

I am your 85th like a new 33rd comment

Pretty cool Haul The pulpwood car and that tanker for Texaco those are tycos I know that for a fact. I had the Dewitt Clinton back in the day that was a neat little thing a thing always ran too. Like you mentioned some of those bachmann steamers they did have some trouble back in the day.

Wow, you are one lucky young man or some one has really blessed you; the latter, perhaps. I have a lot of the older LifeLike and Tyco freight cars I cut off all the truck mounted couplers (talgo trucks) and body mounted Kadee couplers. Then I changed all the plastic wheelsets to Walthers Proto 2000 metal wheelsets with metal axles. Think I ended up doing around 75 to 80 pieces and weathered them as I went. Took several hundred dollars and about six or so weeks. I've got two of those Mantua 4-6-2 Pacific engines I repainted and decaled for the Central of Georgia since I used to live in Jonesboro, GA. I also replaced the magnets with neodymium (rare earth) magnets and it made a HUGE difference in current draw and performance. Did that to all my Pittman (open frame) motors. A tip on the Bachman 4-4-0 American Standard Jupiter engine, don't run it for any length of time pulling a few cars as it is tender driven and as soon as the motor heats up the drive will begin to slip on the shaft and the engine will stop until it cools enough for the plastic to re-grab the metal shaft. You might want to super glue the plastic drive gear to the shaft before running it. That's what I did. God be with you in your college pursuit. From the looks of your long fingers you would make a very good guitar player. Hopefully your college endeavors include music. Cheers from eastern TN

2:28 Ouch 😬

Could I buy the Bachman Percy from you? Also maybe the Union Pacific ore car?

Lucky bro. I'm jealous . Keep being awesome. I love trains just like u . Trains for Life

Smt mainline jr

9:30 I have a few of those Tyco Santa Fe F units, the Santa Fe logos on the front of mine were literally just decals that peeled off, so that’s likely what happened to this one

It would be really cool if I got a massive free HO scale train lot

Wow a free HO train lot sounds amazing looks like Christmas came early for you

Wow for free, super jelly

How q-p i want free ho stuff

Do you have A Layout?

Omg colby hair reveal

FREE. Nice haul

this should be handy fro me, just got both these guys

19:15 those bachmann old time sets are sometimes grabbed up by ON30 modelers for their motorized critters

12:45 is most probably an advertiser car. Special painted cars for a company used to advertise their brand. There are ones for stores, food brands, (I have 2 Campbell soap trains) or some company (ever see a century21 set?) There are also holiday sets as well. Might want to research because some are rare (Paul Revere blue tyco box car is one, asking is 200)

5:30 coal loading tower for steam engines, several designs, older are wood , newer ones were concrete.

5:15 is a sanding facility, older design, oldest would not have the silver tower. This is deigned for steam engines (water tower) The oldest design would have a rope and bucket to add sand to loco

9:10 is a covert car, 3 white water coverts come with it. designed to be used with tyco covert loader action set

Is the headlight burned out on the locomotive?

well done. good info.

A Fine Class B Shay. Me personally, I say shay locomotives are Great.

Can you add a link to the gears you ordered?

nice fix

I can not stand those Bachmann split frames

4:21 you should put a decoder in that engine, It would look nice.

When in doubt, take odorless mineral spirits and lots of Q- Tips and thoroughly cean all wheels on any used engine which you acquire before you start complaining about performance. Might also want to implenent a serious monthly cleaning program for all your track. Just don't use Isopropyl alcohol or the"everbrite" claning pads.

Where did you get this model? its a nice one.

I don't like Bachmann and never will. I'm 73 and have been a model railroader since the mid 1980's. I've scraped more Bachmann engines than I care to remember. Split frames and split gears are a trademark of Bachmann. Cheers from eastern TN

Good looking engine. I run n scale and only have one Bachman steam engine that I won. It runs pretty good but I have heard so many people complain about them that I would not buy one. Thanks for sharing. Dave

I had so much trouble with my 0-4-0 due to the way it picks up the power, these seem different but mine has a thick copper wire that just barley touches the wheel on each side and positioning it correctly was such a pain

Good job, thanks for sharing. Dave

You could be the first to start off the 'LITTLE BOY CHALLENGE". Most railroaders are tired of the Big Boy.

I think you did pretty good there, Colby! When I saw the thumbnail for this video my first thought was "I hope the gears aren't cracked." It seems to be a common issue with the Proto 2000's. Nothing that a young man with your skills can't handle, though! 👍 I imagine that the previous owner needed to remove the weight from the B unit to make room for the speaker. In his best Don Corleone (Google that name if your not familiar with it) voice: "Colby, ya done good."

Varney F2 Bluebox chassis

Great job! Thanks for sharing. Dave

No but seriously how the heck do you keep finding all this stuff for less than 50 bucks

5:29 reminds me Puffa from Tugs

6:43 These locomotives were similar to the life like tea kettles they never ran really good out of the factory I would argue they were even more unreliable than 90s bachmann I like the old time looking 040 and 060

looks like you got some nice engines to work on. i have both the aristocraft engines as well. hope you can get your 0-4-0 motor to run. can't wait to see all the repair and maintenance videos!

This video made me realize the War Thunder train is pulled by an F2