Видео

Hi ChristerSigvardsson, thanks for your question. In terms of which battery to use, we recommend the CR123A-BP1 that can be found on our website. I hope this helps answer your question.

Hi, thanks for your query. For updated pricing please navigate to the link below, www.instrumentchoice.com.au/hygrometer-temperature-dew-point-meter-with-battery-0560-6081. I hope this helps answer your question.

Hi UmarFarooq-my6it, the Wile-55 does not have a scale for feed pellet moisture and as such is unable to measure this. At this stage we are unaware of any meters that can measure feed pellet moisture levels. Hopefully this helps clarify your query.

Hi ChemcoStudios, Thank you for your enquiry, and on this, how old is the unit and when you are doing calibration what particular buffer solution is it giving WRNG in?

@ I'm not sure. 5 years ago maybe. Because I'm new in this manufacture.

The calibration procedure is determined automatically from the meter. The meter will confirm if the calibration passes or fails. If there is a failed calibration, an error message will appear to confirm the issue.

@@instrumentchoice is this stated on the manual? We are currently on our accreditation on this instrument and the auditors had asked us how can we prove this

Hi Durairamalingam-e5v, thanks for your question. There is no way to directly converting this reading from per centimeter to per square centimeter.

Hi Tyronepenning10, Thanks for the enquiry, on this, which particular setting are you on when this occurs and are they holding a device at the time you undertake the test?

Hi Evilutionltd, thanks for your query. In terms of troubleshooting this issue it may be better to message the team directly at scientists@instrumentchoice.com.au they will be able to help out further on this issue.

Hi, Erick-MoroConche, Thanks for the enquiry, the phone App with Bluetooth is only required for setup to connect to WiFi. Once this is connected, it will upload to the Cloud direct through your WiFi network and the phone won’t need to be nearby.

Hi, nichiro960, you are able to use distilled water for the zero calibration. I hope this helps answer your question.

Hi, FishChipsco-h51, thanks for your query. On this it would be better to contact our team directly with your issue as this may require some additional information, they can be reached on scientists@instrumentchoice.com.au.

Hi @KhaLed-pb4pu, on these errors it may be easier to reach out to the team at Instrument Choice and provide the date that you brought the item. The team may have to review this further. We hope this helps.

Hi damirfiat, Thanks for the enquiry, with the electrolyte fill solution this will need to be filled when the solution drops below around half full or if the electrode becomes sluggish.

Hi Sitinurshafikasuda5205, thanks for your question. IC7209 is designed to measure air temperature only and as such is not suitable for water temperature monitoring. With this in mind, exposure to water will damage the unit.

Hi, Matthewdonovan8195, Thank you for your enquiry regarding your EXPERTPH. On this, how old is this pH meter? It could be that the electrode has failed and will need to be replaced. What was your application?

Hi Benefits4all, thanks for your query. The Fluke 62-Max-IR is designed to measure surface temperatures, while you can use this to measure the surface temperature of a fridge. If you are looking for the internal air temperature of a fridge and more accuracy a probe that measures air temperature may be more suitable.

@@instrumentchoice thanks I tried it today and i found it successful in that

Range between -30:500

Hi Lindsaytemple5645, Thanks for the enquiry regarding the PMS-714, with this model, 0.0% is dry and 50% is saturated. On this meter, you cannot store readings, you can only hold a reading, or store and display a maximum or minimum reading. I hope this helps answer your enquiry.

Thanks for the enquiry, on this, yes this is correct, it is on the automatic setting and in calibration mode will recognise the solution it is in.

Thank you for your question on your Testo 405i, on this, this would likely indicate it is trying to establish a Bluetooth connection. Can you send a photo through to Scientists@instrumentchoice.com.au and the team will assist here in getting this working for you.

Hi Carlosbenjaminpaez2268, Unfortunately we don't know of such a tutorial.

Hi BMEHasanMahmud, thank you for your enquiry, on this, can you confirm which meter you are referring to here? The value of 100% is more relevant than the 9.1mg/l value as this is adjusted for our barometric pressure.

Hi huynh4880, Thank you for your enquiry, and on this, it will largely depend on what you are measuring. What sample are you testing? As in general rinsing in distilled water, or a detergent/water mix can suffice for most applications. There are some applications where electrode cleaning solution would be vital, so if you can confirm that would be great.

Hi, Jackson2108 thanks for your query. In general we recommend avoiding touching the circuit board as much as possible due to the amount of sensitive electronics found on the circuit board. This is mainly in regards to the components rather than the board itself. I hope this helps answer your question.

Hi, thanks for the feedback. Don't forget if you ever need any assistance our team is available to help at scientists@instrumentchoice.com.au.

Great to hear.

Thanks for your query. In regards to calibrating the BOD, this is calculated from the DO reading. As long as the DO is calibrated, then the BOD reading will be accurate.

Hi sorry to hear of your trouble, hopefully we can help. The first thing we can recommend is follow the below instructions, 1) Have the unit powered OFF. 2) Press the ON/OFF, Meas and Cal button simultaneously, and “Init” should appear. 3) Once it does, press “CAL” and the meter will turn off. Now turn the meter back on and try and recalibrate again. If this still doesn't work, please send a photo of your meter and error through to scientists@instrumentchoice.com.au the team will be happy to help you through this error. I hope this helps your question.

Hi Garyroach8624, thanks for the enquiry, on this AP normally means “Access Point” and correlates to a WiFi setup, however, this station doesn’t offer this. Can you confirm you definitely have the XC0432 here?

@@instrumentchoice Sorry its a 440, I did manage to get them paired, I disconnected and removed all batteries and began the normal set up as at the firs power up. Thanks for you reply.

Hi thanks for your question. In regards to your query we can recommend having a look at the following link this may help you out. shop.humle.se/en/equipment/measuring/oxygen/zero-oxygen-calibration-25-g#:~:text=Prepare%20a%20solution%20of%204,be%20prepared%20shortly%20before%20usage.&text=Produces%20approximately%20500%20ml%20solution I hope this helps to answer your question.

Hi @ThingsthatBling-fi7qp, The Weatherlink Live is only compatible with the newer Vantage Pro2 Sensor suites and as such, it won’t be able to be used with the original Vantage Pro.

Hi @ngside9580, the IC0400WS has no internal memory or ability to communicate with a PC etc. You can only see conditions on the console.

Go into the mode you want to reset, either the Maximum or Minimum mode using the “Max/Min” button, and then hit “Max/Min” for 2 seconds, this will reset it to the current reading. I hope this helps answer your question.

Hi @luckypiston, thank you for your enquiry, on this the App may only be able to display velocity, not a flow measurement in graph form. We will flag this with Testo and will see what can be done.

​@@instrumentchoice Thank you, Yeah it would be nice if that option became available simply on a firmware update Personally myself and i think customers too can more easily relate to volume flow than velocity, i think its easier to imagine cubes of air moving through a duct rather than air ripping along at xxxx# of feet per minute. Now if u can show that with a graph that would be awesome but u know what , if u could lay the two graphs over each other that would b even better ! then u could show the effects of transitions and bends in the system simultaneously and make comparisons , could be a even better troubleshooting tool !

Hi, LuckyPiston, Thanks for your query. On this, IC-0560-1405 will only measure in feet per minute (fpm) to a maximum of 5,900 feet per minute. If you would like to see more Anemometer's there may be something on our website more suited for your application.

@@instrumentchoice I'm considering it for use in a cylinder head flow test bench, typical peak flow rates there are between 200 and 300 cfm with a 4 inch bore pipe , my calculation (actually i used ChatGpt) is 300 cfm = velocity 3435 fpm or 17.46 M/s , so it looks like the 405i could easily be a viable option.

Hi @@luckyPiston, on this, as this falls within the range, it would definitely appear that this unit would suit your requirements. Just make sure it is also within the temperature tolerance of the device to ensure it will suit. If you would like anymore information it may be easier to contact our team at scientists@instrumentchoice.com.au :)

Hi @rabiyashah3882, Thanks for your question, on this, TDS is a factor of conductivity, it applies a factor to the conductivity reading to produce its TDS reading. In general if you are specifically looking at TDS and want to ensure accuracy, it would be advisable to calibrate TDS as well. For TDS you would do a manual calibration using a standard of your choosing from 0-10ppt. What sort of level are you measuring?

I want to check pH, ec, and tds in soil samples but this instrument is showing me pH readings different readings every time?

Also can i use standard sol of 0.01M of KCl for EC

To find out the price of the Wile-500 Hay and Silage Moisture Meter it would be best to check out our website for updated pricing. Here's a link through to the Wile-500, www.instrumentchoice.com.au/hay-and-silage-moisture-meter-wile-500. I hope this helps answer your query.

Hi, sorry to hear about your troubles. It may be best to email your issue directly to our team at scientists@instrumentchoice.com.au. They will be able to help you sort out your issue.

Hi, thanks for your question. HI98129 can be calibrated in a normal ambient room temperature environment. As long as this is below 50c room temperature won't effect the calibration of the meter. I hope this helps answer your question.

Hi Derekkchung, IC-435-0007-03 features a charging indicator light that will blink green while charging, when charged the LED will remain continuously on. I hope this answers your question

Hi Peaaah4069, thanks for your query. Hopefully we can help sort this out for you. On this it will be easier if you send in a photo of your device to our team on scientists@instrumentchoice.com.au the team are aware of your situation and are ready to help.

Hi micman4278, Thanks for the enquiry, at present, we are only able to offer the meters that can facilitate measuring High RF and High EMF, but are unable to offer medical advice. For this, I would recommend reviewing ARPANSA which is a Government website, or utilise peer reviewed journal articles from Medical bodies.

Yes, the Hanna HI98193 can measure BOD (Biochemical Oxygen Demand). It is specifically designed for measuring dissolved oxygen (DO) and BOD. It does this by calculating the difference between the initial and final DO concentration readings in a water sample. I hope this helps answer your question.