Видео

So unfortunately you can’t adjust position or open/close it but for my optimal driving position it aims at me pretty well. I haven’t seen it as an issue but it might be for others. The trade off in my opinion is still worth it. Hope this helps!

@@Fin_mistakeoh ok, that’s really unfortunate Thank you for the help

Absolutely agree! I was originally looking at SR5s but once I learned more about the limited I knew it was the best option for a daily

Yeah that’s the downside to them, price. If you find a good deal you gotta jump on it! Overall good car, excited to take some trips with it

@@iManual6peed thank you! More track days to come

@@Bigdizz87 We’re getting there! Thinking about starting to time myself at the next event

Highly considering it! I just changed the NRG quick release for the Works Bell which allows me to mount my steering wheel buttons but I'm still on the fence on if I actually need the Zestek one. If I do decide to get it I'll make a video on it

The instructor told us not to put the car in track mode so I wasn’t able to check my temps. I now put the car in track mode and have an oil pressure gauge and oil accumulator setup so definitely keeping an eye 🙌🏼

I’ll be back at Sebring in about a month!

😭😭😭

Idk if it’s the size of my feet lol but I can’t my foot on both pedals. I do have smaller feet tho so maybe that’s my problem

@@Fin_mistake its doable! You’re not trying to press the gas all the way down. Youre blipping the throttle as you downshift while in the clutch for that brief moment. Best way to practice is to have the car on accessory mode and do the motion over and over

@@driftindan I’ll definitely give it a try, hopefully I can pick it up!

Awesome man! I’m sure my viewers could use this info as well

Appreciate the insight! This was during the GR Experience so rules may have been a bit different due to experience levels but good info for others going to NJMP

Appreciate it! Definitely gives a clean look to the interior and really good supporting mod for track use

Appreciate the callout Ryan! The instructions seemed like it wanted you to but it’s wasn’t super clear so I ended up using it anyway. I ended up overfilling about 2 liters but the dipstick was still showing about halfway between the 2 dots so it could probably take more. I’m preparing a track prep video in a few weeks where I’ll be overfilling by about a liter. I’ve had the system on the car for about 3 weeks now and so far no noises, squeaks or rattles. The only thing you hear is the valve opening when you prelube the engine. Other than I haven’t heard any random noises and nothing has leaked yet. Hope this helps!

😂😂 you gotta make do with what you got

Thanks! Tried my best to explain the benefits of installing this

Appreciate it! More coming soon

Appreciated! We’re getting to the good part!

Ayyy my guy! Appreciate the love

Yessir, it’s linked in the bio

Go to minute 1:12 in the video, I explained why I went with UCAs over LCAs!

Thanks man!

☺️☺️

Appreciate that!

Check out my other video on Wheel/Tire & Coilover install!

Hope that’s true, it’s been just fine driving around so I’m confident it’ll be okay

Thanks 😊 Definitely agree man!

Appreciated dude!

Lol

Thank you 🙏🏼 we’re actually in Florida!

It definitely wasn’t the most fun 😭 and thanks for the info! I haven’t had this issue yet but I’ll definitely keep an eye out 🤙🏼

I’ve seen people cut the metal out and use 3m to keep the garnish in place. I just didn’t wanna cut it 😭😭😭

Can’t beat FR 💪🏼💪🏼

Got a new video coming out this week on the solution to my rubbing issue!

@@Fin_mistake will install my coils this weekend and will get a new tire. You think 255/35 will cause a rubbing issue?

@@davidfajardo2312 on stock wheels or 18x9.5s?

@@Fin_mistake yes with +45

@@davidfajardo2312 your setup will be slightly more inset but you might still run into a bit of rubbing. Just don’t drop it too low and dodge those potholes. Tires also matter, so R888R are more blocky and square so they tend to run more than most tires

Henry Hudson 🤙🏼

Much appreciated!!

Dm me on IG, maybe I can help out! @fin_mistake

I’m not 100% sure but I would imagine they do! The splines on the hubs are exactly the same so I would think they do

@@Fin_mistake well, the hub you used is for the older brz, but I wouldn't see why they wouldn't work. Have you ran into any issues yet?

@@8we3t yeah that’s correct, I originally bought it for my 2013 brz but since it’s been down I ended up using it for the GR86. No issues other than the alignment issues I mentioned in the video! I’ve had it on the car for a little while now and all has been good! I remove my steering wheel basically every time I drive the car, 1-2 times a week and haven’t run into any issues with that

@@Fin_mistake perfect! just bought a momo 78, nrg quick release and the same hub as you, hopefully all should be well!

@@8we3t Awesome! Only thing I would say is to get an alignment after it’s done, It may be slightly off. Hope it goes well!

Appreciate it! Definitely ran into issues but it worked out in the end!

😂😂😂😂

Miss you man! When u coming back?

Yeah I definitely agree

Thanks brotha 🙏🏼

Yeah definitely! Big fan of the blue

Much appreciated! Gotta get creative with the angles

Appreciate that!! More content coming soon