Видео

Agar Multiphase Flow Meter MPFM-50 provides accurate, real-time measurements of oil, water and gas flows simultaneously without separation of the phases. Specially designed for low maintenance and ease of operation, they require no field calibration or prior knowledge of fluid properties (such as fluid density and salinity) to attain the specified accuracy. The real-time data capabilities of th...

In the Agar oil skimming system, two probes detect oil, the yellow light turns on, the oil draw-off valve is opened, and oil is skimmed from the top of the tank. When both probes detect water, the blue light turns on and the oil draw off valve closes - eliminating any free water from being discharged with the discharging oil. When the oil layer builds and both probes detect oil, the process is ...

The ID-200 Series Interface Detectors are used for interface measurement and control in all types of liquid/liquid and vapor/liquid separation processes including emulsions and foam.

The ID-200 Series advanced control capabilities can be used to automate upset responses, antifoam and demulsifier chemical feed systems, and eliminate cross-contamination of separating phases. A wide range of models, process connections, and output options are available for the control of a variety of process installations such as Tanks, Decanters, Dehydrators, Desalters, Coalescers, etc.

The Agar Foam Detector, operating on the principle of energy absorption, provides early detection as foam begins to form. The information is used to control and optimize the defoamer injection rate resulting in a reduction of chemical costs, protection of downstream equipment, and reduced process upsets.

Over time, storage tanks containing hydrocarbon feedstocks, will accumulate water. Manual control of the water draw-off can result in HC in the discharge, which means, less product for sale and increase in the cost of waste water treatment. In-tank interface detectors give the best results for eliminating the discharge of hydrocarbons. In-line hydrocarbon/water monitors avoids tank penetration ...

Agar’s System 3, which is a combination of Interface Detectors (ID), provides extensive information and control capabilities far beyond simple level control. It is a series of probes that represent the first and only interface control system that provides continuous 4 to 20 mA output signals that are proportional to the % water concentrations at their individual locations inside the desalter. A...