- Видео 3
- Просмотров 58 278
onescrew
Добавлен 9 окт 2013
i like what i do and i share it with you
Asus 1070ti Strix how to change thermal paste
I decided to sell my Asus 1070 ti Strix because I am getting an Asus 3070. I also change the old thermal paste with the new Arctic MX-5. The GPU runs good, no issues at all.
Просмотров: 8 427
Видео
Acer N50-610 i7 10700 upgrade cpu cooler
Просмотров 16 тыс.3 года назад
I've upgraded the stock cooler from an Acer N50-610 computer to a redux Noctua NH-U12S so I can make it quieter. I achieved that but the side panel wont close anymore (cooler tower to tall). Before the cpu was iddleling at 58C with a 70C spike when watching youtube, now it's idling at 34 C and never passes 70 even when playing.
Ddx4016bt boot screen change
Просмотров 34 тыс.7 лет назад
Change boot image kenwood ddx4016bt requirement: one usb flash drive FAT32, empty (for biger than 32GB flash drive use custom format tools to make it FAT32) a little screw driver Pixelformer(software) now let us start Afte formating the usb flash drive to FAT32, create a .txt file on it and name it: OpeningCUstomize.txt in this document you write some lines: Opening Customize [FILE]yourfilename...
You applied too much thermal paste my friend, still good job
I hate silent videos.
Thank you sm u saved me
Hello, I also have a Strix GTX 1070 TI, but lately its temperatures are high, do you know what the thickness of the thermal pads is to make the change?
1.0-1.5 cm
Does the cpu cooler obstruct the Ram slot? Is it possible to fit all four Ram in?
I will install a similar cooler soon and tell you
u can`t
Bro the thermal pads though
IT WAS WD-40?!?
Yes, WD-40 Contact Cleaner
Replace pads next time and i wouldn't worry about spreading thermal compound it would sort itself out when pressed against heatsink
U forgot the pads!
Is that the onboard speaker next to the cmos battery?
Thx for this. Im switching towers from everything in my Nitro desktop.
how its for switching a nitro, can u help me ?
Hey, do you think I could just straight up buy a new case and motherboard, and transfer everything from this pc to there? Things such as the power supply unit and the cpu, I already know I’ll be able to transfer the ram and gpu. Would greatly appreciate if you could help :)
The PSU does not have a standard 24 pin, so no, it would not be cost effective to buy a new case, psu, motherboard and a CPU cooler
@@onescrew So what you’re saying is, I would have to buy a new psu if I decided to buy a new case and motherboard? Also, why wouldn’t I just be able to use the cpu cooler on this pc?
@FadeD yes, if you decide to change the case and motherboard, you would have to buy a new psu with the standard 24 pin(the one from Acer has proprietary connection) and also a cpu cooler because the one that comes in the Acer has a proprietary mount(as shown in the video)
@@onescrew thanks for the help, I’m still considering switching though, I’m sick of this cheap motherboard, I have been unknowingly using my 3200mhz ram at 2133mhz because the motherboard does not allow me to change it.
@@faded5754 same me to but i just got this pc and its been a major upgrade i had a 3470 i5 with a gt 1030 now this pc have the 10400 i think with a gtx 1660 super it flies
Thanks for sharing.
What’s the name of the took u r using to unscrew?
iFixit screwdriver
@@onescrew ty
wonder why you got the whole motherboard out. For this noctua you could get some m3 screw kit. use the black spacers and you can fix the mounting of the noctua on the old cooler mount l, the four pieces where the old cooler screw been in.
what's the max height for the cooler to close the side panel?
the Noctua Redux that i use has 158 mm so i recommend going under 130mm to be safe
135mm might just barely fit but I highly suggest no taller than 110mm, I'm using the Silver Soul 110 in mine and its fantastic. I just cut the "arms" off of the rear OE socket support and slipped the new one over to mount.
this is literally useless. The original CPU cooler is already good enough. (at least for me)
no its not except maybe going with the u9s so you can close the side panel but still your comment is more useless nobody cares if its good enough for you because the 10700 starts throttling faster than your mom did last night when doing anything more taxing than watching youtube. only thing i can take from your comment is that you dont know shit and prob own a prebuilt like me
Can i change the psu? And if yes do i have to buy an atx or sfx psu?
you can change it, but you need a proprietary one, because the one inside is not a 24 pin PSU
@@onescrew do you know a psu that would fit in for example?
@@Ismail-vx6ii this is the original one: LITE-ON PA-4501-1AC 500W 80+ GOLD 6-PIN ATX POWER SUPPLY F/ ACER NITRO N50-610; have a look and start from there; keep in mind, i don`t recomand to change it.
Dose anyone know if its posible the take the cpu bracket off without the special screwdriver
Depends
Hi, will it help with noise reducing? I mean changing the cpu cooler. I have same pc with stock cpu cooler and 1 fan and it makes a lot of noise
hello, yes, that was the main reason, to reduce that cpu fan noise; also i am using it with out the side panel and the exhaust cooler is connected to a low noise adaptor from noctua
Is it possible to change the case
yeah but you would propably need a new motherboard and a new power supply
the gpu will still fit right?
absolutely
hello two questions. where do I find the support for the processor to then be able to put the support for the heatsink on top? and if a wire from the wifi card comes off, how can I hook it up?
I'm not sure I understand, however, if you need the mounting retention bracket, just buy a defective 1151 motherboard and get it from there(it worked in my case); regarding the Wi-Fi wire, just google some images ;)
Possible upgrade motherboard ?
if you do that, you have to get a new PSU because the one inside does not have the 24 pin cable
@@onescrew ok, so basically it's possible to change the motherboard from the moment I change the power supply ?. which one do you recommend? like i do to find out if it will fit in the acer case
@@hasang7802 I do not recommend changing nor the motherboard nor the PSU because, although is possible, acer uses a proprietary MB and you will be left without front ports.
@@onescrew Sorry but what is an MB?
@@hasang7802 Motherboard, sorry
good video I also get the cooler at February 20th👌
You can use Noctua U9S if you don't want to remove the motherboard.
With special screws?
@@mrgigglez2770 The screws that come with the U9S
What else you can use pls tell me Like brand tsunami ID cooling or else
@@Title_TH No idea. I've sold my Acer N50 years ago.
@@mrgigglez2770 you need M3x10mm
This smaller plate is exactly what I need.
lol fr i may just get the noctura u9s. dont need that bracket for that cpu......
Please give a link to get smaller cpu backplate.
I have it from an old socket 1151 mobo that has bend pins
If you're confident with a Dremel, you could fabricate it from the one already on there
@@onescrew Can I use lga 775 motherboard?
@@ozzden i don`t have one in hand to test it out; just find a cheap LGA 1151 with bent pins or some damage and use the bracket from it
@@onescrew What happens if I cut the edges of the bracket?
Ciao, il mio ddx4016bt non riconosce usb come mai?
hi, please try another usb stick and make sure you format it to fat32
Anybody know how to do this on the ddx396 model?
Can i return to original logo? How?
Maybe try and flash the image with the initial logo
Very good
2:12 Fart ?
😆😆
Do you know how to do it witk ddx4023bt? I try everithing. I can enter to chenge splash picture but dosent find it on usb. I try everithing
How do you centre the image?
Is this also working for the DDX4018DAB?
nope it will f up ur startscreen,,, it did that 2 mine but i did get it working trough, change the version number to 9876 then do this, pixels need 2 be set at 800x480 turn the image 180 and mirror it save as a 5,6,5 16bit bmp and upload it, done.. it works :)
Good evening I tried to do the operation on DDX 4017bt but I can not load it, once the USB drive is inserted, not the law Are we sure the procedure is correct?
have done everything the EXACT same way you did i can not get it to work
ekalb1027 try to update first and than leave a reply
I tried this today, but I can't get past customizing part. It just stucks there. Do you have an Idea how to fix that?
Datus try update de double din to latest version, than make sure the photo you use is like in the desciption and maybe try with another usb stick
Thx for the tipps, du you have any advise on where to get the latest firmware? I didn't find it on Kenwoods Website
Datus try to search on google for ddx4016bt firmware, is the first one on my search results www2.jvckenwood.com/cs/ce/mm/firmware/2016/2016c/eng.html
i just updatet, but sadly it still dosnt Work
Datus try with another usb flash drive on fat32 file system or get another image, or review your .txt file, it has to work
Your image doesn't actually fit the screen (as is the problem I am having). You can see on the left that the green line is actually the far right of your image. Not as noticeable on your graphic though.
when i used the Pixel former i did not used it in full screen mode, it`s that what are you saying?
ottimo video, ma come mai a me non riconosce la penna usb?
edoardo mameli it has to be Fat32 and try with usb that are smaller than 32 gb so you can format it using windows
Desdemona Eleonora si ho fatto tutto così e ho una penna usb da 8 gb, e quando la collego al kenwood mi dice " please insert usb and retry
edoardo mameli you can try with another usb stick if you have, i did it with a 64gb usb FAT32 flash drive from SanDisk and i used partition magic to farmat it. Make sure the name on your usb stick is simple, only letters and make sure the name inside the . txt file is the same as the name of the picture
Desdemona Eleonora la stessa penna usb per ascoltare musica funziona, quando la formatto non me la legge più
edoardo mameli ok, i understand, but when i tried and got that :"please insert usb and retry" it was because my usb was not corectly formated, now in if i were you i try with another usb or maybe format your usb with a diferent software beside windows