- Видео 2
- Просмотров 96 111
Mae Nova
Добавлен 26 апр 2014
3D Printable Hanger with Screw Fusion 360 Tutorial
In this video I show you how to quickly design a hanger and a screw which you can 3D print.
If there's anything you'd like to see in a future video, feel free to leave it in the comments and thanks for watching.
If there's anything you'd like to see in a future video, feel free to leave it in the comments and thanks for watching.
Просмотров: 1 029
Видео
3D Printable Hinge in Fusion 360 tutorial
Просмотров 95 тыс.6 лет назад
Note: The initial sketch was supposed to be on the XZ or YZ plane, not the XY plane Maker’s Muse released a video about 3D printable hinges a few months ago, which inspired me to make a few myself. Unfortunately, I found only one tutorial for Fusion 360 here: ruclips.net/video/iMXEjyda9rk/видео.html Link to Maker’s Muse’s video: ruclips.net/video/7JhjhgjchfM/видео.html
Cool👍
hi is there any other way to create allowance for the hinge to move at 10:22 ? i think its because new version of fusion hence i do not have the feature of going back to the first part
Thank you for this tutorial! Despite using a newer version, I was able to match all needed actions, thanks to your explanations and remarks.
Very nice. Thanks!
Hello i just have a question how thin can i make a hinge?
You worked very well, I'm a little curious why you work upside down, it's hilarious, jajaja 😂 😂
Hi i reallying enjoy your video honestly that's the one i need it right now, can you do me a favor to put the file in description😅 please🥺
the sound is horrible
Perfect i was searching for this tutorial after Maker's Muse Video
Very bad voice
Apparently, over 200 subscribers patiently waiting for the video #3.
Yup
Thanks grate video tutorial
very bad sound
also its a good video
SLOW DOWN
Nice
Thankssssss!!!
Would this actually print in place and work? I’m not sure it would... which orientation would you print it? It has overhangs greater than 45 degrees in all orientations from what I can see...
Hey Neddy, yes, this will print in place on most modern printers. Make sure to print without supports. You'd be surprised how well 3D printer can print in air without any supports.
cringed so hard
jesus fycking christ whats going on with your mic?
could you give the data to this hinge, it looks exactly like the one I need :)
good....
great video, as others pointed out, investing in a better mic would make your videos much more enjoyable to watch!
Hello Kevin, I've to say i learned a lot from your Fusion360 tutorials, now i was wondering if you could do a tutorial with a stylish pillar. Will be highly appreciated
I'm Tom tho 😢 What do you mean by stylish pillar?
Tomas, thanks for clearly explaining the process of making a hinge using Fusion 360!. My sample worked the first time! This was my first hinge.
I am new using Fusion 360 and you explained how to make this hinge very well and I printed it later and it was perfect thanks for sharing your knowledge
Did you print it as one thing?
Hello Yes, of course, it is printed on one piece and is slightly joined in the center, but then separates the two pieces by hand.
Super helpful
people complaining about audio like they came to listen to a song. Dont mind the audio, the content is important.
Listening to static and constant white noise might be fine for you. But don't purport to tell other people what's acceptable for them.
@@artistryartistry7239 indeed. I’m partially deaf in one ear and even with headphones I’m really struggling with this video.
fix your mic but good video
Thank you so much for creating this video. i was wanting to make a custom hinge for my 3d printer enclosure because didn't like shop brought and couldn't find any that i like on thingiverse so ive used this guide to create my own custom one. once again thank you for share this. helped me out a lot
thanks Thomas your wallpaper made me laugh
why this crappy sound ?
This video is a good companion video to the Maker's Muse one because Angus just talks about hinges, he doesn't actually show you how to design one in the software. I'm trying to do this in Autodesk Inventor, so I hope the commands are similar. :) But watching this gave me a general idea of how to do it.
3:30 which is going to present the AAAAAAAAAAAAAAAAAAAAAAH as i call it
Can i export it to sketch up and then attach it to an existing object?
I don't see why not. But I think it' be better to just model it directly, that way you'll have more control :)
How would you insert the pin? I don't catch that part.
You can print them together on a 3d printer already assembled. They can't come apart.
@@justenhansen oh really. just figured that out. Thx mate;)
shame there's only 2 videos, I got a lot out of both of these. Thanks
Great content, too bad the audio is bad, and you go way too fast. Hope you remake this video at some point.
Thanks for the excellent tutorial! I have to mention so many others have already complained. This nice tutorial is totally spoiled by the horrible audio! What a pity!
I guess microfon 3d printed too
:D
Maybe he does not live on Earth.
Thanks for a great video , I have a question Is this no need for support? or I just can print it ?
Print without supports, completely flat. The tolerances in the hinge will let it move and not fuse together :)
Tomas Svitil Thanks for your fast feedback then how can I know the maximum tolerance? you use 0.3mm for gap Is this related to nozzle size?(0.4mm)
@@devstefancho it is specific to your printer - how accurately it can print. The easiest way to find out is to print an accuracy gauge like the one from Makers Muse. Or just print and keep changing the tolerance until you get a a good print. You can expect it to be 0.2~0.5 depending on how good your printer is :)
Tomas Svitil I will try this Thanks for your feedback again!
@@maenova417 hiii but can i print without support becuase i modified the design abit
Really useful! Good hints..but better audio pls...even if everything can be followed just by watching.Thx!
thank you !
So, you are going with that audio ??? Huh.
What about the tolerance to fit the 3d printed parts?
I guess I forgot to mention that. The thread command actually prints really well and gives a bit of friction which holds everything together. If it is too tight, you can select the thread faces and use the push pull command to adjust them to your needs ;)
Thanks a lot bro, my first Hinge !
Good video, but invest in a better microphone
Why do you have to have the F word at the beginning of your video it rains it for kids who would like to learn 3-D printing
It was my wallpaper at the time
@@maenova417 yeah i got that part but maybe you could have edited your video to remove it thats all im saying..
@@djmason9 fair enough, next time
Thank you so much! Very informative
Nice tutorial. I'd like to show this to my high school students but there's an f-bomb in the first seconds. Ha ha. It's ok I love my coffee too. Cheers ps I might still show it
Epic