Видео

Are you talking about the circle pin for the blade? Idk if they updated them knives or when you ordered yours but if you are referring to the pin that stops the blade from flying out the front mine will fall out if I turned the blade upside down. Or at least that’s what I remember, I haven’t had to take the knife apart since this video

@@lv_h8 my other microtechs the pin just falls out but the one in my Exocet is firmly in place. It may have loctite now and I tried heat and some other things to break it free with zero luck. I was able to shave the side of the blade with minimal damage to the body and fixed the deployment problem. Thank you for this video 🙏

@@travisdale6535 oh that’s awesome ! Glad I was able to help. Surprised they don’t have this issue sorted yet. I know did too much grinding inside mine but I’m glade others don’t have to and it’s a somewhat simple fix 👍

Nah ! I like tinkering with things, mentioned this already, didn’t care if I voided the warranty. It’s been working like a dream ever since I “fixed” it

Right haha ! I like tinkering, making things, knowing how things work so it was fun for me and on the plus side I was able to fix it. But yeah spending that kind of money for something that doesn’t work isn’t ok

that's indeed super annoying and i'd be very pissed too. i guess i was lucky with my sandtrooper exocet, hadn't had a single problem yet.

Made in America means absolutely nothing when it comes to quality. Don’t even get me started on the dogshit wages these top brands pay employees

I made the tools out of some old bits I had laying around

It’s not currently on me and I won’t be able to post a video on it until some time next week, if you still need it. From what I remember the plate should be pretty strait forward and I know the spring has two different sized metal pieces at the ends. I think the smaller piece is up towards the top. The plate should only work one way because of the catch points for the locks. It should go blade in (use the grooves), the blade pin that keeps it from flying out the front, plate on top of the blade, then the spring system

If it helps check out 2:40 in the video to give you an idea on the orientation of the plate

I’ve got the same prolbem with mine currently have it apart. It seems like it’s hanging up on something or something is giving it resistance inside, I think maybe the stopnpin is hanging up on the paint, or the side of the blade that contact the handle inside the grove is catching on the paint? How’s the drop pin inside the blade supposed to be? Is it supposed to be flush with the blade on one side and protruding on the other side? I’m gunna try lighly filing down the edges and polishing them with a fine Diamond stone and see if that helps.

You got the better video of the 3 that’s on here. Some better close ups of the internals and how the spring is supposed to go would be great. And show more how to reassemble. I found it tricky to keep the spring in place it keeps wanting to pop off. The bigger tab goes at the bottom and hooks around the plate and the blade. and the smaller one at the top, the plate can only go one way to move the little angled spring loaded thingies, maybe that’s what’s hanging up and not letting it fire out all the way and then retract with full force? It just seems like when it does it it’s in countering some resistance and stoping or slowing it down and causing it to hang up. Lemme know what ya think or have found out in the last couple months since you posted this! Thanks!

@@Moose400ex video going up now. Hope it helps