Видео

Thank you for the video

That was so helpful; thank you! Cooking is not frustrating any longer! I've been battling clicking for a few years already; I wish I had seen your video sooner. I used steelwool to polish the burners, and it worked!

Thank You! I have a Thor HRG3618U these models are similar and I tried everything, and the manufacturer was not very helpful, I tried your solution, and Voila!

Well it was worth a try. I have a THOR 6 burner range and have two of those exact burners with the exact problem. For years I haven't used the front right and left burners because of this issue. THORs customer service is no help either. They are based in California and somehow my house here in South Dakota managed to have one where there is no support for it. My orifices are clean (used ultrasonic jewelry cleaner). I've adjusted bypass jet settings. I tried this sanding trick too. No matter what my simmer burner pitters and goes out and clicks. Before seeing this video, I had just purchased what appears to be updated models of these burners and main jet holders. I get them this week. If they work, I'll post a video as well with the parts used. If not then 250 bucks down the drain. EDIT: I found another video where they sanded the inside of the burner base. I did a test run simply putting a single sheet of tin foil with all the holes cut out and that was enough to act like a gasket and got the burners working until the new parts arrive.

Brilliant!

Thanks, very helpful! Cleaning and aligning holes seemed do do the trick for me.

I turn machine on it heats and is ready for coffee. But when i press the button the red light pops and no coffee... Can someone help fix this please? Thank you a lot

Fantastique! You are a magician sir...

I don't know how you came up with this fix but I'm glad you did! I recently moved into a new house with this range and the clicking was insane. I ended up throwing the breaker to cut the power after lighting a burner.

Wow 😮

This is so great, we have had trouble with this for years. Thank you!

I found that a guitar string worked perfectly to clean out the gas jets. A Q-tip with some simple green, or other degreaser, helped with the cleaning process.

Hi, could you please tell me part number spark igniter?

This solution worked well for 2 of my NXR burners which resulted in continuous ignition clicking. A clever and simple solution to an annoying problem. For what it's worth, the machining/casting of the burner components was pretty rough and contributed to this issue.

Thanks a lot man. I really couldn’t believe this would work, it’s such a hack. Great work.

Very informative 👍

For double shot just press it twice instead of making 2 separate shots, also either your grinder setting or the amount of beans you are grinding is not correct for a strong espresso shot, that's why your shot looked like American coffee. Increase the amount of coffee you are grinding and set the grinder at much smaller grinding setting, you will see the difference.

Hi Ajay, I just want to say your RUclips video is the most comprehensive troubleshooting guide to the ubiquitous NXR ignitor-clicking issue on the internet. Your video is a great public service resource. Shame on NXR for not posting a troubleshooting video like yours. Great job!

Sounds like a flim flam in the rigamarow. It’s a common problem.

Thanks for the tip! Worked like a charm.

OMG! I've been switching burner usage and living with the annoying clicking for years! Thank you so much! Worked like a charm!!!!

Such a well thought out video! I found it so helpful. Thank you.

Thanks for this vid! The clicking has been driving us nuts.

Great video! When I called NXR support they made no mention of the burner head needing to be flat.

I had to clean my burner heads and let it sit for 48 hours to fully dry out. Started it back up and it works like a charm...

It seems that you are the only one who gave a reasonable explanation of the cause of the continuous clicking. Thank you very much.

I just made this mod on my NXR to correct that annoying clicking: ruclips.net/video/sb6Z2qv6zOQ/видео.html

For anyone that tried this, but your stove is still clicking .... are there any other solutions or suggestions? I tried this but my stove is still clicking

Hi Ajay my low flame pore is clogged. How can I open that

You are my hero. Thank you for this brilliant and simple fix.

Sounds good! I'll give it a try. I have the same stove and the same problem.

Thank you so much, I will try this tonight. I have an LED out, do you know how to remove the front panel?

Genius

Thank you!!!!

I'm so grateful and impressed. I spent hours with pins and paperclips cleaning holes and cleaning with wire brushes and cotton swabs to no avail. I realized after watching your video that there was a small gap created by uneven contact between 2 components of the burner. Problem solved. Heartfelt thanks.

Why not use a fine sandpaper? Now everyone has a concrete/cemented area. BTW THIS IS A SHITTY PRODUCT. poorly made. Crappy 3000 dollar range. Why the hell should people do this ??? AVOID THIS CHEAP PRODUCT AND DONT BUY! THE COMPANY SHOULD FIX AND NOT THE USER.

Too wordy!!!

It’s amazing that a range that costs $5000+ US dollars and Costco sells, have this design flaw. Thumbs down for the engineers at NXR, this problem should be a recall issue, and a re-designed burner should be provided to NXR range owners with this problem. I am very disappointed at this company. Thanks for the video, they should hire people as smart as you, that understand the laws of physics in real world scenarios, at this companies.

Thank you very much for this sir

I have the same issue, thanks for the video. I have to try the same things

when i turn the test mode on to clean it , the red light blinked at first but then stays on... it is an 8yr old machine..

Thank you! I can't even begin to tell you how frustrated I've been with our NXR range. This fix did the trick. Thanks for sharing this!

Por favor en español las instrucciones o subtitulo 😞

Wondering what your background is? Materials Engineering? Brilliant problem solving. When I see brass used in an application like this, I can only think of the ship breakers. I bow in deference to them. They are amazing.

Do you know you can push the button twice for two shots?

Amazing, I think every NXR customer should watch this...great job!

Nicely explained!

does the burner base just lifts off? mine does not come off

The water dont work

How does fixing the flame fix the clicking? Does the flame keep the spark from jumping or something?