Видео

Hey mate, What did those forks and triple clamps come off? Sorry just didnt quit understand

This is not a ultra bee this is a storm bee😭

Hey! I took my Storm Bee to the Karting track with some 17" wheels, grippy tires and noticed the shock would pump under acceleration with any amount of lean + bumps. At 2:00 you mention the shock doesn't have a ton of damping... do you think this possibly why i'm getting this pumping action? I'm about 220-240 with my gear on. Awesome videos btw!

Would you suggest changing the stock KKE forks to the Honda CRF forks for a casual hard enduro rider? mostly slow technical terrain. thanks for your great videos.

could you send me the link to where I can buy these forks?

Very interesting Thanks!! Did you take the shock out from the bottom ? Or what is the easiest way ?

I'm doing the fork spring thing on the 47mm Storm bee to attempt balancing what the rear end needs against the , umm , soggy front ... Do you happen to have measured the fork spring and solved the rather mechanical top out clunk issue . ( want to order the spring asap without disabling the bike for too long , you know , lazy ...)

More travel?

Awesome. Thanks for the info

I'd order a set of those spacers for the rear!

What would you do for a spring rate for a 295/315 pound rider

I did this 9 months ago with CRF super Moto mags as you say it's relatively straightforward. With a big disk conversion if you remove the front disk guard bracket you need an additional 3mm on the spacer length. I've got a 320mm disk on mine.

What springs can I get to stiffen up my storm bee forks?any showa fork spring work?

Good stuff Jake! Probably dropped some nice weight.The stock steel sprocket alone is an anchor. I forget which year but Honda did space the sprocket out 3mm. If you do a spacer kit I will buy two sets from you.

Thanks for the information. If i want to run a 320mm front brake disc then i can buy one what is capable with the CRF, but what about the brake caliper? Is that a direct bolt on also? So if i want to move the factory front brake caliper outside to fit the 320mm rotor, a CRF caliper mount will work? Thanks in advance :)

Any advice for new oil? Mine is leaking from the sealing/bushing, I will replace both the sealing and oil.

Keen to see what wheel will go on the rear, I hate the gross 18” mine has. Nice vid mate.

I'm 175 -- do you think the stock fork is good for that or should I think about replacing it? I feel like the sag is supposed to be set up for my weight, but not sure. I am prob more like 180 with gear on.

do you have any videos on how to set up the sag correctly on the stock suspension for different weights. i have been looking all over the internet for a guide on sag for this, and mine is still stock and not sure how to get this correct for my weight.

Yes, I'll have another video soon showing wheel compatibility.

Thanks for the information. Do you have info about the wheels maybe? Wich CRF wheel is direct replacement for the StormBee? Even rotors and sprockets by chance? :)

Thanks so much for sharing this... great to see what's going on inside the shock!