Видео

Sorry . . Video shows nothing..... It's another "look at what I did" video. Please take it down.

I changed one on a 2008 dodge charger 3.5 along with the cam shaft position sensor and crank it isn’t shedding off in idle, but it jerks when they get up to 80

Hey bro i have the same one, can you please check the part number for your front bumper parking sensor harness, i need to buy one harmess that connects the sensors and fogñights

What parts have you changed and how many miles on the vehicle? Ty

Way too much in oil and the can is too full to have been effectively suctioned into the engine

Believe it or not, I installed these on the rear of my subaru years ago and no sounds or squeaks. These cost similar to some other adtermarket and ive had sayeaking with POWERSTOP rotors on the rear and didnt have any noise. I know everyone hates Duralast, but for the rear and the fact you can get them same day, they're pretty good

I really want to know who designed this. I REALLY want to know..

Genius

does this work on new ts9's too or have those switched to those new smt boards?

How long did the duralast last?

What about learning.

this is a great design and the structural for this one is perfect.

Great vid and thanks for posting. I think the price went up since you made it. I just created a 2 foot section with 2 elbows, 2 nipples, 2 floor flanges, and a 2' section of pipe. Cost about $45! Worked out perfect though..

why do an instructional and not show even a short clip of it being fed into the vacuum line ... weird.

I am a high gain metal/rock player. Is this a good mod for me?

I took out my AGM supplemental battery and replaced my main battery with an AGM compatible battery and I experienced a leakage of power so that when my car sat for more than three days, the battery was always dead. Would that be caused by the fact that I don’t have an AGM supplemental battery?

Finally, a non pretentious way to use one of these.

At this point duralast outlast moog recent trash

👀👀 WOW I have 2008 TC 4.0 Limited only City drive and average 12/13 mpg :( any ideas...? What is normal average MPG for city for this car and 4.0 engine?

30 min to an hour is what I do.

This is my favorite pour over video! Simple, easy, uncomplicated.

Ta fácil la maniobra

Standby battery replaced at dealership yesterday. After that, heater controls didn't work. Disconnected/reconnected that main battery, pulled fuse F27 and left it out for 1/2 hour. Reinstalled fuse. Let car sit all night. This morning, everything working ok.

I found a new one for under 4 bucks. Very little effort with pre-ground coffee. For even better results use whole coffee beans (which will stay fresher longer) and grind them in a hand grinder with a metal conical burr. Some decent budget options are the Kingrinder P0 (5 burr), P1 (6 burr) and P2 (7 burr) for between 22-44 bucks. There will be some experimentation at first determining best grind settings and coffee to water ratios, plus effort grinding coffee beans, but through experimentation there will be more opportunity to get the cup of coffee best suited to your preferences. For additional improvements, others have suggested the use of roast specific coffee filters (like Cafec T-92, T-90, T-83 filters) which allow for differing flow rates best suited for light, medium and dark roast levels (See The Real Sprometheus' "COFFEE SCIENCE - Cafec's Roast Specific Filters").

Do you know how to take the shelves down to readjust them? My new place has these shelves and I can’t get them undone

There's no comparison, Duralast is 100 times better. It's damn near OEM, and I never thought I would say that until I purchased duralast control arms. And someone that's purchased every aftermarket brand known to man.

why is the red rubber grease in ball joint???

I just bought one this week. Works great. I just use regular filters, too!

Didn't help you showed nothing

How are the rotors? Did they work fine

Dang. That was easy. Thanks.

Man this reminds me of me with my kids the only difference is i dropped my 2ds haha😂😂😂 you a amazing dad thanks for the video

I missed the part where you said this is a video for rear end sway bar links/bushings. The front sway bar links are very very different.

Only an idiot would recommend a non-zerk part over a zerk part.

I have a 2008 and I get around 8-21mpg 😂 so bad

I am an ASE World Class Tech. I always pick parts with grease fittings over sealed. Moog even if its made in China is still better than Duralast. Moog USA is obviously better but just for the sake of the comment to let you guys know. I replace numerous parts daily..

Help! I'm trying to remove my main battery and I removed the nut from the positive terminal inside that red box, but the box still won't come off. Is there something I'm missing? I have a 2020.

I just purchased thd Duralast Gold Rotors and the Duralast Gold Ceramic BPs. Got them on sale on Columbus day, $227 for everything very nice deal. Its going on a 2013 GMC Sierra 1500 tomorrow morning.

Thanks for the info

I won't argue that Moog makes, or, has a chinese factory make, substandard parts but you're not going to convince me the sealed joint is better, I wouldn't even buy an air freshener from Autozone. I made the mistake of replacing the lower control arms on my Subaru Outback with Moog assemblies, Made in China, which I didn't know till they came in the mail. One of the ball joints, sealed, no grease fitting, completely failed within 15k miles... Ate up a practically new tire too. From now on, I pay the extra for OEM parts. At least, for the Subaru. Even the OEM on my GM truck is garbage.

What in the waste of time is this video

I have an 09 vw routan that’s essentially the same van with a 3.8 that gets 12.7 average. Roghtnow ita got the p0420 and ive replaced the sensor to no benefit. Would the cat being bad have that much of an effect on mpgs? It used to get 19

Should I put the duralast elite copper pad together with the gold brake rotor

Thank you for the video. I've just gotten one of these and have no clue how to work on it. Cars are completely different than they were 50 years ago... But anyway I thought that this was going to be probably a 3-hour job but it looks like a 15 minute job and I'm going to tackle it and get it done. Great video Thank you again for the help saved me a trip to the repair shop...

Moog made in America is the one to go with it,now the Moog made in chine or other country is totally garbage,READ THE BOX WHERE THE PRODUCT WAS MADE.

This guy is an idiot!!!!

Stupid video could have earned a follow and share button didn’t put no time into video

Can you make a video of the transmission oil change? For the 4.0 2010 Town and Country?

Great 👍 Thank you!!!

Real god dam helpful. I’m having trouble putting the horizontal brackets. Not real helpfull