Видео

@@AnMa-FPV you are very welcome, it is a fantastic tool, very powerful 💪

@@saisameer you need to flash the same ELRS firmware on both the receiver and the TX16S, you can reach out on instagram and i can help you with that…

@@bilumedia thank u so much , i will text u in instagram brother

@@KursatAkyurek thank you very much my friend for your kind words, happy to help 😊

@@Godot-Game-Dev hello my friend, capacitors help with voltage spikes and electrical noise from the power source, in this case the Lipo batteries 😊

@@bilumedia Ahh that makes sense thank you so much 😅

@ you are very welcome 😊

@@WhoIsDjG4 try to connect to to your computer and reinstall the firmware again

@@bilumedia my firmware is up to date. The drone wants to take off but the back left motor does not seem to allow the drone to take off. All motors are running. When I try to take off it flips over

@@WhoIsDjG4hmmm, so we are talking about dji avata, right? Try to refresh the firmware and see if the motors are not blocked by dirt or something!

Hi my friend, unfortunately no! This was for the foxwhoop 2.5… maybe you cand find them on foxeer website?

@@emadji3907 maybe you are right, but i didn’t have any problem besides the drone falling from the sky 😅, but i don’t think it is because of the sma 🤷‍♂️

@@bilumedia the drone fell from the sky? Why?

@ i don’t understand exactly why, the video link was low and i turned to go back and a few seconds after it simply fell, maybe the battery or an esc 🤷‍♂️

@@bilumedia so strange u video quality was low with the o3 unit… how distant was from you when happen?

@ not far at all, around 1 km

@@abdujalilrasulmuhamedov9219 🤷‍♂️😅😅😅

@@davidosorio2913 😅 it is more like making a mess in your room when you get into building drones 🤣

no problem at all yeah, the camera is important to be mounted in normal way, otherwise the Air unit works even upside down...

@@mariodellacorte only for this job you can do it with the original screwdriver, but i recommend the miniware es15, it is a great electric screw driver, i use it in all my projects

@@bilumedia ok Thank you very much bro. Happy New Year 🎉

@ happy new year 🥳

@@TanyaRai589 thank you my friend 🥰

@@narpat007 thank you my friend. They were created with my old anycubic vyper with esun orange transparent tpu 😊

@AerialFPV-492 yes it is 🤘 happy flying 😊

Hello my friend, i am not sure and i took apart the drone already 😅. Merry Christmas

@@bilumedia No worries, thanks!

My friend, I understand you very well, but unfortunately I didn't film the build yet and I am moving to a new studio! So just be patient and wait until February when most likely I will be able to post the video. Thank you very much for understanding and happy flying 🤟

The Mantis is way way bigger 😁, the betafpv is very small and a lot alot alot of fun 😅, but buy at least 10 batteries 🤣

🎉👍

Hello, i guess it fits, i am not 100% sure, but the O3 fits and i don’t think it is bigger! Ask Speedybee please, they reply very fast

Hmmmm, hi my friend! This is very strange, maybe it is the charger because it is hard to believe that all the batteries have the same problem! Test the tattu ones as well, try to charge them at a different charger if you can! Please keep me updated about your findings, this is very good info for me and others 🤘 Merry Christmas my friend and happy flying

@bilumedia Thanks for the reply, Awad. I value your input. Yes, it would be VERY strange to receive 4 defective batteries in a row. It is equally strange to have a charger that works great on 6s balance charging and even great on 3s but only takes one of the cells to about 3.5 volts...🤔🤨 Also, this is a very basic (4 button) charger with no "smart" technology to go wrong. I should receive two new GNB 3s 550mah lipo packs tomorrow. If they exhibit the same problem, I will buy a new charger. I have my eye on that Q6AC from ToolkitRC, but it's about $200 USD, so I've been dragging my feet 😆. Thanks again for your input. Happy flying, my friend. 🫡 🍻

@ yeah the whole thing is strange 😅, i am extremely curious on the mew batteries that will arrive tomorrow, please keep us updated and fingers crossed 🤞

@bilumedia thanks, I'll let you know how this problem resolves. 🎅 👍

@bilumedia Hello Awad, So today I received two new batteries from GNB. When I put them on the charger, they showed the same problem! I have ordered a new charger because I believe the 3s balance port on my charger is the culprit. I plugged in an old parallel charging board that I have used to charge multiple batteries at the same time. This board plugs into the main power leads from the charger and the 6s balance port on the charger, then has six sets of main and balance ports from 2s to 6s. Long story short, this board bypasses the 3s balance port on the charger, and the new batteries seem to be charging normally! I have never seen a balance port on a charger fail in ten years of quad flying! I learn something new every day. Thank you for your interest and input. Happy flying amigo, and Merry Christmas. 🎅 👍

@@MLeditsofficial i know my friend, i am moving and it took a lot of time, more than expected! Sorry for that 🤷‍♂️, it will be most likely in February and i hope directly with O4 onboard

@@husseinalsweid5062 this one is very good for practicing and it still have the O3 system inside which means that you can do professional shoots with this drone

@@husseinalsweid5062 🤣 thank you my friend, it was a crazy period, it is still crazy, but everything is going back to normal and great projects coming to the channel 🤘💪

@ can’t wait. And still waiting to see you magic on Mario 5 hahaha

@@husseinalsweid5062 🤣🤣🤣 it was impossible to do with the move 🤷‍♂️

Yes, because it is an analog camera onboard!

@@sjvd2011 how do i did what? 😃

Hello, why no capacitor? I advice you to put a capacitor, you have some space there…

@ never needed it been building since blue project falcon, only thing thats ever destroyed my squad was when I lost one in water.

@@letrevz2584 default !

This is why i have 15 batteries 😂😂😂, it is different experience because it is agile and very responsive, with the bigger one i guess you will not have the same feeling since it is heavier…

@@MLeditsofficial waiting for the O4 😃💪🔥

you are very welcome my friend 🙂, they are a lot of fun yeah mainly because you can fly them anywhere

@@bilumedia i have the pavo pico for tight spaces, but I'm pretty stressed when i slam it all over the walls.. because of the O3 unit🤣..and I'm kind of stuck with the digital, since I don't have any analog goggles.. but who knows..maybe I'll try analog someday

@ 🥶 i know, this is why analog is so much fun and you can push your limits to the next level because it is way cheaper than digital💪 I will be in Timisoara in 2 months and you can test it out 😃

@@bilumedia that would be great!😃

@@bashfpv hello my friend, i think you mean an extender? There are extenders for balance cables and you can buy a crimping tool to make them if you don’t want a ready to use one…

Ahlain hamoodeh, I meant the balance lead that comes out of a 3s battery, does it also need an adapter to fit in the charger?

@@bashfpvno no, the balance lead is universal and any battery will fit properly, but be careful what side you attach it to, i mean all the way to the right or the left depending on your charger, you should start from the negative part 👍

@@bilumedia thank you!

@@dccollectoraz you mean the arming sound? What radio do you have? Radiomaster?

@@Rmni2 F7 has a much powerful processor and i think it has some extra uarts, but for most applications F405 is enough… i have F7 flight controllers as well on my other drones, i tend to use them in drones with GPS for the extra processing power…

@@bilumedia ooooo another reason why i should put a gps. Thanks!

It is not a decent screwdriver, it is the best for small applications like drones, just try it and see for your self : s.click.aliexpress.com/e/_DBiH0oz It is from MINIWARE, I have a lot of products from them like the solderint irons and I love them all

@@autofreak03 hi my friend, no jello and jitter no, i advice you to buy or print a tpu holder and it will be fine 👍, but even on the plastic one i didn’t have any issues!

@@bilumedia i got that plastic holder like yours, im deciding which action cam to get, planning to get the action 5 but micro jitters are horrible so i will take the gopro 11 mini route thanks a lot bro

@ i heard that the action 5 is very good and better than the GoPro, but i am not sure about the micro jitters 🤷‍♂️ , i don’t think dji can’t handle that … i advice to try them both, maybe you have a friend that has at least one of them and see if you like it, but i use gopro all the time on all of my drones and no issues so far 💪

​@@bilumedia thanks a lot for the input. Btw i saw you are using an aftermarket props is that a gemfan 5236? Is it better than the stock props especially handling the added gopro weight? I already bought the adapter and also the props 51433 and the 5236.

@ i don’t remember to be honest because i didn’t use that drone for a long time, i build my own drones these days… but i remember they were better yeah 👍

@@ginupe32 depending on what you want! I have both! I have the tx16s mk2 max with the AG01 gimbals and i simply love this rc! But the boxer is better for travelling and it is very good too, actually i think the boxer with AG01 gimbals is the best in terms of value 🤘

@ thx‼️