Видео

My goat, worked for me too, thanks! Will monitor over the next few days if it occurs again. If I don’t comment again, it means I didn’t see any other problems.

My mechanic changed on my 2011 frontier pro4x , i took for a test drive and VDC and slip light come on , he checked on the computer to see why the slip light stayed on and VDC but the was no riding , any body know why , any suggestions what the mechanic did something wrong. Thank you

Thank you so much!!

Thank you for the video It worked on my Xterra 2007

Fantastic video! I had my seat belt light start flashing and code P1564. Was told it's the clock spring. Just ordered it from eBay for $30.60. Hopefully, it works when I replace it.

thanks for sharing my brother ;)

I wouldn't rely on timing the steak when to flip, a chef once told me, "it's done when it's done". Each and every portion of steak will always be different weight and different in texture of marbling of fat. Cook with your heart. >;3

This is one of the gnarliest pieces of beef I have ever seen in a cooking video

Thank you for walking me through completing my first repair on my own. And thank you to the user who commented that it was a 19mm. 😀🎉

Thanku bro ❤️

Life (and pocket) saver! Thanks for the best explained and detailed tutorial. Did it by myself

Great video !

Thanks for the video, saved me from a headache fixing my dad's '07 Frontier which has the same steering setup. Saved at least $800.👍

Dealer wanted $850 to replace my clock spring. Found Clockspring Experts online and they had the part needed for $180. Took me about 45 mins to do while watching this video while I replaced it. Thx!

Is it normal that there is no Steering angle sensor

We call it spiral cable

I have the black IDPM on my 2010 Pathfinder. I read that the starter relay is in the circuit board of the IDPM. Still looking into it

Awesome video 🙏

Excellent video. I changed mine today. Without seeing this video I wouldn't have the confidence to do it myself. It all worked out perfectly. Thank you!!!

On the clock spring I ordered only has one wire for the airbag. This one shows two have two. My Nissan is a 2009

Yep, another one completed, now everything works! Many thanks for your excellent video! John.

Why you reved it up then immediately shut the car off before it went to regular idle? Wont you damage you cat and 02 sensors

10mm?

At 12:33 the white connector at the top left doesn't get connected to anything?

King thank you

Definitely not a 10mm nut holding wheel in place it’s a 19 but a great video and very detailed

Straight forward … thank you!

Fantastic video instructions, very detailed. Excellent teacher and it worked exactly as you demonstrated. Thank you very much

Thank you so much sir very easy steps to follow I just did mine today and go horn and cruise control running again 🎉

Very nice explainable video, but you didn't install the "steering wheel angle sensor" nor did you put the "white" wiring hornist at the left top into the steering wheel angle sensor, on the clock spring and without doing this, there will be a light on the dash board that will not go off !!

I'm just starting to replace mine now. But how long did it take you to pop that airbag off? I can't seem to get it.

Hello I did this job month ago and it was successful thanks to you ..thank you . but I couldn’t stop the airbag light gone . with you’re process .on the switch is there any different way to do it ??

I can’t seem to find the correct clock spring. They keep sending me ones with out steering wheel switches. Can you share with me how to get one

Thanks for your video I fix my Nissan Frontier 2011

Excelent!! Tutorial the best today change my clock spring steering, thank you so much!!

Thanks 😊

Super video!! DON'T DO WHAT I DID!! I should have left on the wheel nut a couple turns when bumping off the wheel... I ripped the clock top off and now am having a new one overnighted because I was only looking to troubleshoot. Leaving a couple turns on with the wheel nut would have saved me from SNATCHING the wheel totally off and ruining what may have been a good wheel clock 🤬 Life's an adventure 🤣🤣🤣 2014 frontier

Great video but please note folks this clock spring video is for Pathfinders that dont have VDC which utilizes a steering wheel angle sensor. You will need a different clock spring with a narrower 1.5" diameter center hole so you can swap out the steering angle sensor for the VDC.

mY SON FIX HIS 2007 CHANGIN "STRTER" FIRST GOT BURN UP, SECOND GOT BURNUO AGAIN,.. THE THIRD, CAME EXPERT AND FIND THE TROUBLE!!!!, MY SON PUT THE STARTER TO TIEGHT, AFTER CHARGE THE BAT, AND CABLES OF BATTERY.... AFTER WE WATCH VIDEOS i CAN FIGUROUTTHE MISTEAKTURN LOTS OF TIMER.THE WASHAS AND BOLTS, JUST TO TIEHGT

Very helpful and easy to follow - thank you!

Excelente 👌 👍

So,You just Whack it on the ground a few times and WHAALA the relay is fixed...lol

Where can you purchase the clock spring?

Did mine yesterday. THANKS for the video. Helpful hint: Make sure you get the gray and yellow combination plugs FULLY inserted back into the socket.

Thank you sir definitely helped me

When you come to Romania, the first 10 beers are on me. You saved me a TON of money. My 07 pathfinder had an error with the right side curtain airbag module and no electrician solved the issue, and they checked every bit of wire. I made the last bit you had in the video, the 5x ignition diag mode and the error is gone! thank you a lot!!

Thank you so much

Great information. Thanks!

I have watched this video several times and have tried to release the air bag without any luck .do you have any tips to try?

Traction control light stays on after replacement all other lights off just the traction on any idea why?