Видео

Microwave Rubber Vulcanization is one of the most effective applications for microwave heating. Methods relying on heating through conduction become inefficient due to the poor conductivity of rubber. However, with Microwave heating, the heat is generated from the core by homogeneously penetrating the rubber. Advantages & USP’s : Fast and even curing Clean and cost-effective process Reduce Ener...

 The Infrared System is highly efficient for the pre-vulcanization of rubber profiles and hoses.  Arranged between the rubber extruder and the continuous vulcanization line  This is related to a better dimension stability and an excellent surface quality.  Important advantages of IR vulcanization are the cleanness of the process, which allows the production of biocompatible cabling in medic...

The master batch contains a mix of natural rubber, carbon and essential oils. Careful kneading and proper mixing of these elements decide the quality of the end product. In conventional methods, rubber manufacturers use a high temperature hot air ovens or do not heat the master batch before kneading.  The preheating takes minutes instead of hours/days as in conventional methods.  Microwave he...

Before molding and vulcanizing the tyre, it is essential for GREEN TYRE to be preheated to certain temperatures. The preheating process easily raises the temperature from room temperature to 60 to 80 °C. Thus, ultimately reducing the molding time for the tyres.  MICROWAVE heating acts instantly on a molecular level and heats the material uniformly throughout its volume  The production time re...

Our MICROWAVE preheater simplifies and fastens the process of natural bale heating. It comes with advanced Microwave heating technology that promotes uniform and quick heating throughout the bale.  Preheating takes hours instead of days. The typical duration for the process with microwave heating is around 2 to 8 hrs.  Enables a uniform temperature throughout the mass of the natural bale.  W...

The use of microwave preheater reduces all such extravagant needs. It can easily perform in the range of 70 °C to 90 °C before being put inside the mold. This process is quick Since the process is quick, the material flow also increases and results in an end-product with a much better finish and higher mechanical strength. Increases production capacity of existing plants by 30- 40% Saves electr...

The conventional preheating of rubber leads to high energy losses and requires you to have significant floor space. Leading to higher costs in overall production and labour. Website: www.microwaverubberheating.com/ microwaverubberheating

TWIN Engineer’s Microwave heating technology gives you an innovative solution to vulcanize rubber profiles and preheat rubber compounds, preheat rubber bells and master batches with the utmost efficiency. Follow Us on: Facebook : microwaverubberheating Website : www.microwaverubberheating.com/

The microwave acts quicker than conventional hot air heating and targets to achieve quick heating of mass. Follow Us on: Facebook : microwaverubberheating Website : www.microwaverubberheating.com/

• Preheat the Rubber performs up to 70°C to 90°C With Microwave Preheater before putting into mold. Increase Production capacity of Existing Plants by 30 to 40%. Reduction in molding time saves electricity. Instant start & stop. Easy to operate. Microwave technology heats rubber from inside - out resulting into uniform vulcanization of rubber during molding. Improve material flow ability with i...

Follow Us on: Facebook : microwaverubberheating Website : www.microwaverubberheating.com/

Microwave Preheater 4

Microwave Preheater for Rubber

Infrared Vulcanization System

Continuous Vulcanization Line for Rubber Profile

Rubber Tyre Preheater.

Rubber Preheater Video 3

Onion Powder Microwave continous Drying Process

Micowave Rubber Vulcanization System

Infrared Rubber Vulcanization System

Infrared Microwave Tea continuous drying system

Chili Microwave continuous system trial video ITC 1