Видео

Yes, you can use the USB to TTL module for programming it

Yes, you can use the USB to TTL module for programming it

Thanks sir

Yes, it's NodeMCu ESP8266.

@@saurav__patil ty

#include <ESP8266WiFi.h> // Define your Wi-Fi SSIDs and passwords const char* SSID1 = "Electro7781"; const char* PASSWORD1 = "12312389"; const char* SSID2 = ""; const char* PASSWORD2 = ""; // Initialize Wi-Fi connection void connectWiFi(const char* ssid, const char* password) { WiFi.begin(ssid, password); while (WiFi.status() != WL_CONNECTED) { delay(1000); } Serial.print("Connected to "); Serial.println(ssid); } // Measure RSSI (Received Signal Strength Indicator) void getRSSI(int& rssi1, int& rssi2) { int numNetworks = WiFi.scanNetworks(); for (int i = 0; i < numNetworks; ++i) { if (WiFi.SSID(i) == SSID1) { rssi1 = WiFi.RSSI(i); } else if (WiFi.SSID(i) == SSID2) { rssi2 = WiFi.RSSI(i); } } } // Calculate distance based on RSSI (simple model) float calculateDistance(int rssi) { // You'll need to calibrate this based on your environment float A = -50; // Reference RSSI at 1 meter float n = 2.0; // Path loss exponent (typically between 2 and 4) float distance = pow(10, (A - rssi) / (10 * n)); return distance; } void setup() { Serial.begin(115200); connectWiFi(SSID1, PASSWORD1); } void loop() { int rssi1 = 0, rssi2 = 0; getRSSI(rssi1, rssi2); float distance1 = calculateDistance(rssi1); float distance2 = calculateDistance(rssi2); Serial.print("Distance from Router 1: "); Serial.print(distance1); Serial.println(" meters"); Serial.print("Distance from Router 2: "); Serial.print(distance2); Serial.println(" meters"); delay(1000); }

#include <TM1637Display.h> // Define connections to TM1637 #define CLK 2 // CLK pin of the TM1637 connected to D2 #define DIO 3 // DIO pin of the TM1637 connected to D3 // Create display object of TM1637Display type TM1637Display display(CLK, DIO); void setup() { Serial.begin(9600); // Start the serial communication at 9600 baud rate display.setBrightness(0x0f); // Set brightness level (0x0f = brightest) Serial.println("Enter a number between 0000 and 9999:"); } void loop() { if (Serial.available() > 0) { String input = Serial.readStringUntil(' '); // Read input until newline input.trim(); // Remove any leading or trailing spaces // Ensure the input is a valid number between 0000 and 9999 if (input.length() == 4 && input.toInt() >= 0 && input.toInt() <= 9999) { int number = input.toInt(); // Convert the input to integer display.showNumberDec(number, true); // Display the number on the TM1637 Serial.print("Displaying: "); Serial.println(number); } else { Serial.println("Invalid input. Please enter a 4-digit number."); } } }

Glad you liked it ❤️

Just visit the digikey.com Or mouser.com You will find out the part number of each component as well as datasheets and ecad libraries. Thanks for comment 😊

@@saurav__patil Thank you!

@@saurav__patil Also, I was doing the PCB part and the red lines were not showing at all and when i press top layer it just fills in the hole

#include <ESP8266WiFi.h> // Define your Wi-Fi SSIDs and passwords const char* SSID1 = "Electro7781"; const char* PASSWORD1 = "12312389"; const char* SSID2 = ""; const char* PASSWORD2 = ""; // Initialize Wi-Fi connection void connectWiFi(const char* ssid, const char* password) { WiFi.begin(ssid, password); while (WiFi.status() != WL_CONNECTED) { delay(1000); } Serial.print("Connected to "); Serial.println(ssid); } // Measure RSSI (Received Signal Strength Indicator) void getRSSI(int& rssi1, int& rssi2) { int numNetworks = WiFi.scanNetworks(); for (int i = 0; i < numNetworks; ++i) { if (WiFi.SSID(i) == SSID1) { rssi1 = WiFi.RSSI(i); } else if (WiFi.SSID(i) == SSID2) { rssi2 = WiFi.RSSI(i); } } } // Calculate distance based on RSSI (simple model) float calculateDistance(int rssi) { // You'll need to calibrate this based on your environment float A = -50; // Reference RSSI at 1 meter float n = 2.0; // Path loss exponent (typically between 2 and 4) float distance = pow(10, (A - rssi) / (10 * n)); return distance; } void setup() { Serial.begin(115200); connectWiFi(SSID1, PASSWORD1); } void loop() { int rssi1 = 0, rssi2 = 0; getRSSI(rssi1, rssi2); float distance1 = calculateDistance(rssi1); float distance2 = calculateDistance(rssi2); Serial.print("Distance from Router 1: "); Serial.print(distance1); Serial.println(" meters"); Serial.print("Distance from Router 2: "); Serial.print(distance2); Serial.println(" meters"); delay(1000); }

Yes, it has sent images on the bot or your server. And also you can configure to send only when motion detect.

It is 3D printed

Yes I know. can do it in various ways and cheaper.

I don't get it, what you need sir

It's an a esp32 cam programmer .. TTL to USB

Lol 😂

Bro it available on chat gpt

@@saurav__patil hmmmmm😑😑😑😑

Yes but you should connect it with wifi

Nahi Bhai ... Tumhe sirf module ko wifi se connect karna hai uske bad .. ip address Lena hai copy karke .. Uske bad tum kisi bhi jagah se .. kisi bhi browser se live footage dekh sakte ho ... Par tumhara camera module connect hona chahiye

@@saurav__patil bhai मेरे esp 32am में ऐसा नहीं होता जीस वाई-फाई से कनेक्ट है उसी मोबाइल फोन पर लाइफ फुटेज दिखती है

मैंने पहले esp 32 को प्रोग्राम किया तब तो दूसरे मोबाइल में लाइफ ओके दिख जाती थी अब मैं दोबारा उसको प्रोग्राम किया तो प्रॉब्लम आ रही है भाई क्या करूं बता दे भाई हेलो

Bhai पहले मैंने eap 32cam वरुव module सिलेक्ट किया था दोबारा मैने esp32cam al thinkar सिलेक्ट किया तो उसमें दिक्कत आ सकती है क्या

Bhai chat gpt ki help Lelo program ke liye ho jayega

Bro it's not needed any input . You just burn the code into the module with uart or any Ardiuno, when you upload code into the module, you have to just connect proper 5volt supply with ground. And then just take ip address from Ardiuno Ide serial monitor. Copy and paste on browser and when module is connected to wifi, then you can your live stream as well as face detection.

@@saurav__patil bro, the ip through which we can actually see the live stream

@JasonYeom-n7y many times there is a common IP template used by all cams, sorry for not mentioning ti

Hey bro this module directly connected to wifi and then you can see images and live footage on you browser with IP address. You just need to upload the code into it ..and connect 5v supply

How yo connect 5v supply​@@saurav__patil