Видео

Absolutely! Sounds nice!

Hey! Your order should arrive on the 15th! The covers are made with 3m Adhesive backing if that makes sense!

Oh dang, I meant the buffing and polishing compounds you used on the plastic cover, but thanks, it's good to know you used high-quality products. I can't wait to install the climate control face. Thanks for the reply.

Ahh gotchya! I’ll do a small short video with a bit more info and some links just give me a couple of days and I’ll send you a link!

Hey sorry on the late response. Basically I just used wet sand paper starting at around 800, 1200, 1500, 2000, 2500 and then used a buffing compound and a polish. I'll try and get a video up in the next couple days another alternative is you could pick up a headlight restoration kit I would only use the drill attachment to polish and would sand by hand as the instrument cluster is pretty fragile. Hope this helps!

Hey you can learn more about the head unit here! OBS F150 Gets New Radio Upgrade & Backup Camera! ruclips.net/video/TPNrP4rYEQQ/видео.html

Absolutely you can check them out here chinookauto.ca/product/92-96-f150-climate-control-illumination-cover-upgrade/

Hey, you can install the cluster but leave the plastic cover off. Turn the truck on and then install the needles. I found that to be the best way to get your needles lined up correctly. It might take a bit of playing with. Hope that helps!

@@chinookauto sounds good I'll give that a try. Thank you

I’m not 100% sure what the situation is it’s been so long since I’ve installed it. I know the instructions it came with was trash! Sorry I couldn’t be more helpful!

How'd the 12 inch go? Not fitment issues?

Let me know how the 12 inch works out!

@@Pludplug It fits amazing. I would actually recommend getting the 12 inch instead of the 10 inch. It actually lines up better with the dash in my opinion. I just got mine installed a month ago or so, pretty easy except for the backup camera wiring. If you get to that part and have trouble figuring out which wire in the wiring harness under the dash goes to the brake lights then let me know. I can maybe put a Google Drive link with photos of how I did it. Not exactly the easiest way, but definitely the best, cleanest, and safest way. Also, if you want full functionality without the stupid parking brake safety function then connect your parking brake wire to your ground, NOT your hot, even so, I would still recommend checking it yourself, touch the wire to your keyhole or other grounded metal and make sure that makes the warning goes away before you commit to it.

Yes

Hey @aaronred01 The truck project was delayed big time due to work, moving, and a few other factors. I'll try to get an update video posted to explain the delays.

Thank you for the update and congratulations 🎉 best wishes to you and the family

Is the positive and negative wires reversed if you’re tapped into the back up light? I know the wires that come in the kit are also really tiny for the back up camera, might be a factor? With radio presets not working it might be worth reaching out to boss audio. I hope that helps!

I can’t remember off the top of my head I’m pretty sure I used the same gauge as factory metal.

I don't have an extra speedometer for sale! Sorry! Thanks for your comments!

Hi, It is the factory Speedo out of my 92 XLT. I hope this answers your question!

Thanks!

Hey thanks! The best way is to install the instrument cluster back in the truck but leave the needles off and clear cover off. You can then start the truck and then turn the truck off. Then reinstall the needles in the off position for each gauge. You can then test it again, make any adjustments and when you are happy put the clear cover back on! Hope this helps!

Btw, if you have one of the hvac labels that isn’t dark enough would you be willing to sell it? I wouldn’t mind the red I’m installing bleeding thru. Let me know

Hey, I don’t have any of the old ones that have the black bleed through. The hvac controls we have in stock will shine through red if you use red LED bulbs tho! Hope this helps!

Ok new question, I took off the clear cover then was taking off the black trim before taking off the needles and a little spring kind of fell out. Any idea what that could go to? Truck is a 95 bronco, automatic with push button 4x4

Man I have no Idea! It might be for the 4x4 button on the black trim?

Thanks for the feedback glad the install went smoothly!

I appreciate that! Thaks for your comment!

We received your order and will get this processed and shipped out to you! Thanks!

2 orders went through some how. I only need 1 ordered. Please cancel 1

Here it is chinookauto.ca/

Thanks! Yes haha most of them have had a hard life!

@@chinookauto mine was used as a Ranch Rig and was pretty beat up too. It has a laundry list of issues.

Hey, I just put the needle on hooked everything up and started the truck. I then played with the needles to ensure all were positioned right before the final installation. I hope that helps!

no worries, I’m sure it was 2” in the front and 4” in the rear. I wish the truck sat a bit higher in the rear I would probably do a 2/2 if I could do it over again. I hope this helps!

@@chinookauto so it was lowering springs that you used to lower the front? lol

Yes this is correct. Springs and shocks.

@@chinookauto awesome thank you!!

Thanks my friend! Much appreciated!

Hey, when you buy the wiring harness and the stereo it will explain which wires to connect. Both the radio and the harness will have instructions! Cheers!

Hey, sorry on the late response. I would recommend going back over your wiring harness sounds like something might be hooked up incorrectly. I wish I could be more help!

Hey sorry for the late response. No there is no mirroring option but car play works good

Much appreciated thanks for your comment!

Hey, I haven’t gotten to really drive the truck yet. Just finishing some bodywork before paint. So in the next couple months hopefully I can provide you with a better answer!

@@chinookauto only downside is its alot of weight. I put ten pieces in my van and they were heavy.

Hey, No there are no sensors in the system. Cheers!

I feel your pain! It’s a process for sure!

I purchased two boxes but I think you could get away with 1 box! Links in the description!

I appreciate the feedback! Absolutely worth it!

It’s this guy here glad it was helpful. www.amazon.ca/gp/product/B088D7R8LG?ie=UTF8&psc=1&linkCode=sl1&tag=chinookauto05-20&linkId=5ff0e4896afd689519629d5ecc4893c0&language=en_CA&ref_=as_li_ss_tl

That’s great Bob! Would be great to see some pictures!

@@chinookauto do you have an email i can send pics to

@@bobwise1347 chinook.auto@gmail.com

Do you have a social media page/account to follow so the rest of us can see some pictures or videos? 😮

It was just the factory neck I cleaned up. I only replaced the tanks! Sorry I couldn’t be more help! There is lots of parts on Amazon as well!

Hey, I got mine from Partsavatar but I also see them on Amazon! Hope that helps!

Thank you for your support!

I'm glad to hear! That's great how far along are you? It will be a while before my next video i've started the body work which will take me some time!

@@chinookauto I've got the interior stripped down the the metal, floorboards prepped for sealer, and all of the interior plastic re-dyed. Im actually going to be using the same sound mat that you used as well. Next after that, I've got the bed removed, and have begun wire wheeling the frame to get painted with raptor liner, replace the shocks, add a cold air intake, retune, body and paint. Then she's done. I'm looking forward to seeing how you approach the body work, are you going to paint it yourself?

Dang man! You've been busy! I found when doing the frame using a needle scaler worked really well! I was debating about painting it myself but I don't have a great setup for paint so as of right now i'm going to most likely prime and block sand it and then take it to the painters!

Thanks!

No worries, jobs never go to plan! 😂

Good recommendation I’ll keep this in mind for the next project!

I appreciate the feed back! Thanks!

Hey, are you hardwired into the reverse light wiring to trigger the backup camera turning on?

That’s fantastic! Let me know how the headlight turn out and which ones you go with!

Nice tip!