Видео

@@DohGla ooyeaah.. Glad you got the point.

1650

@@steinanderson a solution is a preference IMO. for me it's budget solution and everyone else feel the same. And yes the context here is for simracing. I never found someone who use a bezel free kit for productivity or casual gaming.

@@4ka23_dicofirmansyahp5 yg kekecilan itu MD001. Kalo MF004 ini malah ideal.

@@4ka23_dicofirmansyahp5 untuk detail 9/10 sih. Sampe sulit utk repaint nya haha

@@kevinars627 tapi jauh lbh murah dr threezero om 😁

@@victors725 acrylo om

mantapp om.. sekalian ambil yg lain ga? wkwk

@ismail_hobby riview ce 04 dong bang

@@victors725 wahh ga punya. dan ga minat beli juga sih haha.. kurang sreg dgn desain bee yg itu. ini saya masih nunggu POan yg dateng. MD003.

@@ismail_hobby klo sya kurang suka Transformers versi rise of the beast,karakternya kayak chibi" 🗿

@@victors725 haha iya sih, dari semua desain, cuma 1 bumblebee doang yg saya suka, makanya sy ambil PO. sisanya kurang, terutama Optimusnya.

@@JasonIdkau-pw8hi thank you!

@@MARK-lv6pe besi! Tapi bagian joint pastinya ada plastik juga.

Dapet di harga berapa kak?​@@ismail_hobby

@@MARK-lv6pe kemarin PO 1,650

@@ismail_hobby mahalnyooo🤣🤣🤣

@MARK-lv6pe begitu lah.. 😅🥲

thank you!

thank you!

@@king_h.3826 1. I’ve never measured its torque, but it’s definitely greater than the G29 and T300RS. 2. It's 1:7 3. So far, I haven't noticed any delay. 4. Yes it's got hot, but I use a fan to cooling it down. The motor is my6812, it's big enough to give a good torque without being easily overheat.

@@mayomshits4919 you can get a broken LCD TV, and disassemble it. 😅

ini cuma 24inch kok.

@@Youzarsif33 hope it helps!

@ its better than spending 100$ brother

@@Youzarsif33 yes, it's not as good as asus's free bezel kit. But it's much cheaper and still do the job.

@@Threewlz it is. But I don't post it on hub. I just copy paste from some one else.

pake ac servo motor. harga bervariasi sih. lebih murah cari barang second. biasanya banyak yang masih bagus kondisinya. harga tergantung ukuran fisik dan spec nya, bisa 700-2jt untuk second. kalo baru tentu jauh lebih mahal lagi.

sama mang, tapi lebih murah beli langsung mika ini daripada beli TV nya 😆

Orang mana mang ​@@ismail_hobby

@@bjmhobby8107 Indonesia dong.

@@tfkhdt_ itu saya pake ky-40 juga, tapi saya lepas board nya. Om bisa tiru aja wiringnya sesuai kaki2 yg ada di diagram yg saya gambar di video. Kalo mau lebih sedikit tinggal hilangkan aja beberapa button, dan sambung ke button lain, jangan ada jalur yg bentrok. Kalo mau lebih jelas, cari aja tutroial utk matrix button

@@ismail_hobby udah bisa mas, makasih banyak. Cuma pas udah konek 1-2 menitan kok tiba-tiba disconnect ya ??

@tfkhdt_ udah pake modul step up? Biasanya batre ga cukup power utk angkat stm32 nya. Harus di step up ke 4v ke atas. Kalo sy di 4,4v

@@ismail_hobby udah pake om, di up ke 5v

@@tfkhdt_ pake batre brp mAh?

In my country it's on the online shop/marketplace. It's called fresnel lens sheet. Or you can find it on LED TV sparepart shop.

@@alansatriyawan1091 sama persis dengan DLX kalo sy liat sih. Cuma emg ball joint leher lebih panjang, jd lebih jauh utk artikulasi nya, tp kalo pose tertentu malah jd terlihat kurang OK, ada gap di leher.

@ismail_hobby berarti masih bagus threezero ya. Bnyak yg beli ini mau ikut beli sbnre. Tolong Review bee MD 001 om gimana sama kyk threezero g soale kbnyakan g ada logo autobot

@@alansatriyawan1091 dari harga juga beda sih, dari cat memang lebih bagus threezero, tapi kalo menurut saya build quality yg ga jauh beda dan asesoris serta jari yang ada artikulasinya, mending ambil md001. btw, maksudnya bumblebee MD003 ya? saya udh PO lagi nunggu barang dateng aja. memang versi KO ga akan ada lambang/logo autobotnya.

@@ismail_hobby dtunggu reviewanya ya om. Gak ada minusnya y om kalau ko threezero. Rencana mau ambil ko nya sy bee SM op.

@@alansatriyawan1091 siiap.. saya jg ga sabar nunggu barangnya dateng, sekalian dengan MF004. kalo utk MD001, yang saya suka, dia gak letoy sendi2nya kayak threeezero yg saya pernah pegang.

@@siddhantdas1069 no, and no. It's an exact copy of optimus prime DLX threezero. It doesn't have a matrix leadership gimmick. And you have to buy autobot stickers yourself

@ stickers are not a problem..thankfully I have them 😅..but it’s kind of a waste not to have the matrix 😅

@siddhantdas1069 Yes, that's very unfortunate. However, you can switch to Cybertron mode, it's quite a good gimmick.

@ yeah I’m definitely ordering it 😎😁

@siddhantdas1069 you won't regret it. The build quality is good and hefty. Just lack of weathering.

terima kasih! jangan lupa subscribe!

Yes, it's necessary to get the coil stay on place (make sure it's on the center). Second, I make a hole one each side one for the mounting to the pedal, and the other for the heat dissipation. Use a good pvc material if you can.

@@ismail_hobby Perfect, now that I think about it, the coil being on the outside of the coil sheet doesn't lose magnetic force?

@matiasmottura8179 no, its still strong enough to make the magnet move roughly. I even add a plastic/lens sheet for my bezel free kit, to minimize the friction.

@@BillAshtonNelo some called it fresnel lens sheet. You can find it in the lcd monitors.

glad it's work for you. yes its called ghosting button/switch. you can't combine button with this wiring scheme. I don't use combine button while driving so it doesn't really bother me. but you can always do an experiment with it. I found a good explanation for ghosting button, you can add a diode and fix you problems. ruclips.net/video/i85SAufdPFU/видео.html

@ Thank you very much for your answer. I've watched the video and it seems interesting. I'll try it in the next assembly. Greetings

@@burnamapsi share dan like bro! Wkwkw

@@braulegames8025 I think so. It's 3.7v right? You still need a step up for it.

@@ismail_hobby what do you mean by stepping it up? in this case, would it be the two cards you use in the video?

@@braulegames8025 you need to up the voltage from 3.7v to higher like 4v up to powered up the arduino. if not, it won't work as it should.

@@ismail_hobby The Step Up Mt3608 does this, right?

@@braulegames8025 yup, that's right

thanks!

kalo polosan kurang oke om wkwkw

@@toprakkacmaz1361 you can do it yourself bro!

@@COM-GASPARALONSOITURRABURKART thank you! Please like and subscribe

@@19Nikegolfr1 that's a DIY ambient light. Using an arduino and rgb LED's.

@@ismail_hobby so can I ask what I need to set this up? I reallyyyyy wanna do this! I was just gonna go with regular TV lights but this is way cooler!

@@19Nikegolfr1 I don't have this setup anymore, its been a long time since then. but you can follow this tutorial. ruclips.net/video/nzDnr76fZCc/видео.htmlsi=px2z2cdlpFEEjHiK

@@ismail_hobby thank you so much man!! ♥️

untuk saya sih ini figure no minus. yang ada di Threezero ada disini, plus gimmick yang ada di MM01/magnificent mecha, ibaratnya fitur dari 2 figure di combine jadi produk yg lebih lengkap.

@@ismail_hobby mendingan ini ya dari pada threezero ver?

@@bryangeraldo1757 kalo saya sih gitu. Krn harganya jg jauh. Ga sanggup ambil threezero🤣

@@ismail_hobby iyasih ini diecast di bagian mana aja?

@@bryangeraldo1757 seluruh bagian skeleton nya terbuat dari diecast kalo ga salah. saya cuma bisa pastiin yg terlihat aja sih. dari siku, lengan, pinggung ke paha, lutut, ke ankle juga. sy ga punya DLX, tapi dari review ini lebih berat drpd DLX bbrp gram.

no I don't, just the wiring that I provide. you're good to go.

itu untuk pengganti telapak tangan, yg bawaannya itu ada clip nya utk tempat pasang senjata2. yg tambahan, itu tanpa clip, jadi terlihat lebih clean figurenya, tp susah utk pasang senjata.

@@reiisbrunoo of course, here you go. Don't forget to subscribe. ruclips.net/video/mvBff3PC3iI/видео.htmlsi=nxJU69QKFfSrAmP6

@@ismail_hobby oh yes, I watched that one but this mini seems to be stronger hehe

@@ismail_hobby I'm trying to develop one that will be strong enough, I want to start with a small one and then try to make a big one.. I bought the copper wire this week and I'm looking forward to putting it together soon

@@reiisbrunoo actually the magnet and everything else is the same, only form factor is different, and the final device is as strong as the one in the video.

@@reiisbrunoo bigger magnet and good copper coil makes a different. make sure you have a big amplifier too.

@@erwinnovi9572 1.7an om. Sy beli barang ready jd agak mahal.

@@riszotaher wah belum ada waktu utk bikinnya. Dan harus bongkar2 kalo itu 😅

@@ismail_hobby hehe iya juga si gambaran aj bang senter di dinamo apa di pakai berapa volt sama lisensi berbayar / free kesitu aj bang help

@@riszotaher ohh oke, nanti dibuatin gambaran umumnya, sambil room tour lah haha..

@@ismail_hobby ok bang tak tunggu ya lagi build ni soalnya tapi kebanyakan slah" beli jadinya karna ngga ada gambaran yang mantap gitu bang

@@VinhPhát-r1y unfortunately it's only available on my country, Indonesia.

@@itsryuuno kurang tau kalo itu. Ini utk stir yg dipasang ke Wheelbase sim racing, dan biasanya udh encoder nya, ga perlu gyro utk belok kanan kiri

@@atnguyenngoc2579 please check the description. I made a note there. You must downgrade your library and use the exact library that I used.

@@ismail_hobby do i need to use low end arduino software, if so what version

@@atnguyenngoc2579 I put the information in the description. You just need to follow it.

@@ismail_hobby c:\Users hokj\OneDrive\Documents\Arduino\libraries\ESP32Encoder\src\ESP32Encoder.cpp: In member function 'void ESP32Encoder::attach(int, int, encType)': c:\Users hokj\OneDrive\Documents\Arduino\libraries\ESP32Encoder\src\ESP32Encoder.cpp:89:9: error: 'gpio_pad_select_gpio' was not declared in this scope; did you mean 'esp_rom_gpio_pad_select_gpio'? 89 | gpio_pad_select_gpio(aPinNumber); | ^~~~~~~~~~~~~~~~~~~~ | esp_rom_gpio_pad_select_gpio Using library ESP32Encoder at version 0.6.0 in folder: C:\Users hokj\OneDrive\Documents\Arduino\libraries\ESP32Encoder Using library Keypad at version 3.1.1 in folder: C:\Users hokj\OneDrive\Documents\Arduino\libraries\Keypad Using library ESP32-BLE-Gamepad at version 0.1.9 in folder: C:\Users hokj\OneDrive\Documents\Arduino\libraries\ESP32-BLE-Gamepad Using library BLE at version 3.0.5 in folder: C:\Users hokj\AppData\Local\Arduino15\packages\esp32\hardware\esp32\3.0.5\libraries\BLE exit status 1 Compilation error: exit status 1 I followed the video, used the version as you described and it gave me the same error

thank you!

check my another video, there's a tutorial for this and I explain the program I use there.

@@ismail_hobby can you send me the link please, I cant manage to find it anywhere. Thank you so much for your help 🙏🏼🙏🏼🙏🏼

@@puhfaborikorn7234 ruclips.net/video/sDdLMyt--Sw/видео.html

saya pake yang 30 pin