Видео

Inch is bad

Excellent tutorial. I learned a lot in a short amount of time. Big thank you!

Great video for us beginners. Many of the presenters of other videos don't explain their button clicks. You did a great job of explaining step by step. Thanks!

Thank you. Excellent presentation. Can that model then be converted to the flat development of it? Thus giving the cut dimensions of the blank. TIA.

Perfect tutorial. Too many instruction videos declaring to be for beginners go too fast and skip steps. Some will even wave the cursor around the screen making it difficult to follow even when using pause and go.

Thankyou 🤠Ejike

Thank you for this helpful tutorial. Good pace and well explained

Whoa! Whoa! Whoa! Finally I get it!

Clear to the point and easy to follow and understand. I've been using FreeCAD for over 12 Mths (Total Novice with CAD). I've become reasonably proficient in Sketcher Part, PartDesign and Curves but Draft has escaped Me. Many FreeCAD Wikki Tuts are to advanced or vague to understand. This has taught Me stuff about Draft I've been trying to figure out for ages.

I seem to be stuck. When it's time to move the rectangle to be symmetrical about the X axis, the entire rectangle turns orange and nothing moves. ??

What about the GDB aka the debugger? You need this to debug any problems

Your tutorials are magnetizing and excellent. Thank you very much! Would you be prepared to present a tutorial on designing a simple cabinet out of wood with a door and a drawer?

Thank you very much - your presentation is excellent. Do you have any more tutorials?

Another way to do this would be to click on the center point of your diagonal line then the vertical axis then use the constrain point onto object tool. Keyboard shortcut o.

Is it possible to explain how to use a dimension of an sketch object to determine the value of another dimension - even a dimension from a different sketch of a separate body or part? I don't mean from a spreadsheet, but from the objects sketch itself. For example I have a sketch with a dimension that I label 'length' in its reference box when I type in its value. In a separate part I want a dimension in that part to be twice as log as the length of that 1st part. Without using a spreadsheet - can I set the dimension in the 2nd part to be " 2 x Part1.Length "?

Thanks, great tutorial! How many years of CAD do you have under your belt?

Just learning FreeCad. I learned Solidworks before... If only they had called the Tool 'Reference Binder' instead of 'Shape' - I would of learned this tool MONTHS AGO!, ,, Arg!

Thank you, excellent explanation!

Ottimi tutorial complimenti, pero le immagini sono sempre sfuocate, almeno per quello che vedo io. saluti.

What a great intro, thank you so much for this. I've been hunting around for a decent step by step video to just grasp some of the basic principles, and this really is a great starting point. Looking forward to reviewing more of your tutorials.

Thank you..

Sheet metal wb is a very powerful tool within FreeCAD. Thank you for the video always useful for newcomers on the platform. Cheers from Portugal

Great video, thank's

wow i learnt alot thank you 👌

Great video

Camphor is an oil. Chamfer is to create a flat edge. Good video.

Good video.

❤ Thankyou very much the screen is much better I just couldn't see a thing before

you lost me when inches came in...

Awesome video tutorial! You need to do more of these. This is really easy to follow, and It actually works well when I try it. I even made a nut by myself afterwards! Thank you

Awesome

Thank you starting out on Freecad and the other methods people showed did not make much sense.

Just what I needed, thanks!

Thank you so much for the help. Congratulations 👏

Great Explanation very clear and easy to follow👍

I didn't think I would get to the end but I finally got there. This technique is very interesting, thank you for this tutorial.

Exactly what I needed. Thank you. The new threaded hole function in freecad .20 does not offer i.e. M6x0.5, so I will have to do it this way. Now I just have to figure out the correct metric dimensions for the thread I need.

And 'KABOOM' we have a playground! That was a helpful video, thank you.

Thanks for helping me understand the shape binder tool.

thanks, very helpful video.

Thank you!

Hole has an option for ISO threads. Why not use that?

This is a really good walkthrough. Thanks!

You are a very good teacher! Your detailed explanation is 👌 ! Looking forward to seeing your new videos! Keep up with the good work!

x1.5

You sound like John Goodman

Thanks man! Great, easy for a noob to follow. 👌😁🇸🇪

Pitch is confusing me, what makes you say that .125 is your pitch, when pitch is just the distance between the two same points at one full rotation ?

not sure if you check the comments but every time i make the cutter when i close it disappears. I changed background color just in case its hidden. when i click on model it comes up as combo view but disappears soon as i try to work with it. any suggestions ? like the video just stuck . thanks.

Outstanding ! are you good with curves working bench ? "wink"