- Видео 2
- Просмотров 24 861
ceasy
Тайвань
Добавлен 16 окт 2011
Fixing Bosch Series 8 oven touch pad not working—Touch Calibration/博世8系列蒸烤爐/烤箱 觸控面版失效校正
我的蒸烤爐型號為Bosch Series 8 oven CSG656RS7，右側的觸控面版失效。
有幸在mobile01(台灣社群網站)看到網友分享的Guru McDoc的影片Bosch Kaffee Vollautomat (CTL636EB6/05) - Touchdisplay Kalibrieren，雖然這部影片是針對Bosch的咖啡機進行校正，但將其校正方法轉化運用在蒸烤爐，也能成功修復失效的觸控面版。
Bosch Kaffee Vollautomat (CTL636EB6/05) - Touchdisplay Kalibrieren(ruclips.net/video/sGHEpe3T08g/видео.htmlsi=Qx4Leu_ZgzZEs1vH)
操作模式如下：
1.啟動維修人員模式/enter to the service mode
在關機模式下，雙手同時操作，左手按「沙漏」，右手按「i 」，這時會連續聽到二聲短音，二手仍按住「沙漏」與「i」，再立即按下「on/off」，聽到一聲短音後放開雙手，即可進入維修人員模式。
操作影片如下：
ruclips.net/video/ZBc3XmEWTJU/видео.htmlsi=FL4JXEN0w8lV7_xL
2.觸控螢幕校正模式/Touch Calibration
2.1操作圓環旋鈕，找到「Touch Calibration」，再按「start」，開始進行校正。
我是仿效Guru McDoc，使用bosch的「圓環旋鈕」來操作，但我不清楚使用「圓環旋鈕」的原因為何。校正過程中，我也曾嘗試用手操作，也可以觸控本已失效的右側面版，不...
有幸在mobile01(台灣社群網站)看到網友分享的Guru McDoc的影片Bosch Kaffee Vollautomat (CTL636EB6/05) - Touchdisplay Kalibrieren，雖然這部影片是針對Bosch的咖啡機進行校正，但將其校正方法轉化運用在蒸烤爐，也能成功修復失效的觸控面版。
Bosch Kaffee Vollautomat (CTL636EB6/05) - Touchdisplay Kalibrieren(ruclips.net/video/sGHEpe3T08g/видео.htmlsi=Qx4Leu_ZgzZEs1vH)
操作模式如下：
1.啟動維修人員模式/enter to the service mode
在關機模式下，雙手同時操作，左手按「沙漏」，右手按「i 」，這時會連續聽到二聲短音，二手仍按住「沙漏」與「i」，再立即按下「on/off」，聽到一聲短音後放開雙手，即可進入維修人員模式。
操作影片如下：
ruclips.net/video/ZBc3XmEWTJU/видео.htmlsi=FL4JXEN0w8lV7_xL
2.觸控螢幕校正模式/Touch Calibration
2.1操作圓環旋鈕，找到「Touch Calibration」，再按「start」，開始進行校正。
我是仿效Guru McDoc，使用bosch的「圓環旋鈕」來操作，但我不清楚使用「圓環旋鈕」的原因為何。校正過程中，我也曾嘗試用手操作，也可以觸控本已失效的右側面版，不...
Просмотров: 15 580
Видео
Bosch Series 8 oven enter to the service mode 蒸烤爐/烤箱 啟動維修人員模式
Просмотров 9 тыс.10 месяцев назад
Bosch Series 8 oven enter to the service mode Bosch Series 8蒸烤爐/烤箱 啟動維修人員模式 在關機模式下，雙手同時操作，左手按「沙漏」，右手按「i 」，這時會連續聽到二聲短音，二手仍按住「沙漏」與「i」，再立即按下「on/off」，聽到一聲短音後放開雙手，即可進入維修人員模式。 In the power-off mode, simultaneously press “hourglass” with the left hand and “i” with the right hand. You will hear two short beeps. While still holding “hourglass” and “i,” immediately press “on/off” and release both hands a...
謝謝你的分享以及詳盡的解說，省去了過保後請師傅來處理的麻煩。
太感謝你了。本來右邊觸控一直按不了調節時間的按鈕，試了幾次出現E0539,本想說應該要找工程人員來維修，但看到你影片下的解說，再跟著做一次，就成功了，面版用著沒有問題了。實在太感謝你無私的分享❤
Amazing, saving money for ppl!
Superb! Thank you so much.
Hi, thanks for the video. Im getting a E0537 error while calibration is in progress. The left hand 6 yellow squares work well, then the right hand says trail 2, then trial 3 , then error. Right hand screen is unresponsive. Any advice?
Thank you for the help. this solved my issue as well.
感謝分享！ 我剛也重新校正觸控面版失效的問題了。 ：）❤
谢谢，照着教程修好了
I am unable to go in the tech screen as first step “pressing “I” and timer” together doesn’t give me two beeps, I only get one beep, anyone else has encountered the same problem?
I have the same issue. May I ask you if you found a solution in the meantime? Best regards
@@christianschneller2413Hey i have the same issue have you found a solution for it? Thanks
@@clairema3570 on my oven there was only one beep and after that you have to immediately press the third button. I could enter the service menu and do the calibration like in the Video and now it works perfect
@@dankaka1742 see my last comment
@@christianschneller2413 Hey sorry for the question but when you’re pressing the third button how long do you need to press all the buttons together to go in the service menu? Thanks!
that was an oven save nothin less!!! briliant, thank you very much, to anyone wathing , follow the exact steps in the video , dont miss anything, i almost gave up, you need to rotate and press the phisical buttuns as well at the end
How to get to this service menu..?
感謝分享！
感謝分享！！！觸控板失靈ㄧ陣子了 加上今天降溫風扇故障 上網查解決辦法剛好找到您的影片 照著做修好了！感謝您無私的分享❤❤
Thank you so much it works!!
謝謝您的經驗分享，解救了我的烤箱的觸控面板。
Thank you for sharing! It crazy works and it’s fixed by following each step! Bravo!
Hsg656rs1 點解響得一下， 響唔到兩下😮
只響了一下， 響不到兩下😢
It fixed!!! Thanks for sharing!!!
多谢你的分享，我的面板也得到完全修复
在您慷慨無私又詳細的經驗分享指導下，困擾我們家好幾年的烤箱面板「故障」竟然就這樣校正修好了，心裡無比激動，也無比感謝！
謝謝你的資訊 我修好了我的面板
How do you get to the touch calibration menu?
ruclips.net/video/ZBc3XmEWTJU/видео.htmlsi=4ubjwk5kJWIdh8kk
It's useful, thanks'
我都成功了 謝謝分享
Could you please guide me to the movie on the coffee machine screen calibration? I have same issue but for the Bosch Coffee Machine - it does not go into service mode as oven :(
Bosch Kaffee Vollautomat (CTL636EB6/05) - Touchdisplay Kalibrieren ruclips.net/video/sGHEpe3T08g/видео.htmlsi=Qx4Leu_ZgzZEs1vH
This also fixed the problem with the touchscreen not working for me too. As mentioned by others "That final step of pressing on/off, start/stop, and rotating the dial finally got me through calibration successfully without E0539."
You are a super star! Thank you so much. That final step of pressing on/off, start/stop, and rotating the dial finally got me through calibration successfully without E0539.
I got the E0539 after all button test without showing “Finished”. Do you mean after pressing number 6, have to press on/off, start/stop and rotating the dial again to get rid of that error?
yes you need to press the buttuns and turn the dial, thats what happend to me, i went through it like 4-5 times untill i got it right@@samkam7965
非常感謝分享
谢谢你，晚上回家照着试一下，Hope it works
Also - make sure you follow test at the end correctly otherwise it will fail. You need to ensure you turn the dial clockwise and anticlockwise!
A lot of people buy a new screen. My bosch service the first time with this same issue change the screen of my oven - in guarantee. Even the technicals donut know this …
Amazing!!! This fixed my issue. Was about to buy a new screen. I wonder how many people have been ripped off by Bosch buying a new panel!
Toooo much
感謝🙏🏻
大成功🎉反覆睇咗幾次影片同文字，每個步驟背熟後，就跟到。 感謝無私分享
按哪個鍵到這個畫面？
1.進入維修人員模式 ruclips.net/video/ZBc3XmEWTJU/видео.htmlsi=Cbet9I_ZAO9uwza_ 2.旋轉旋鈕選擇calibration進行校正 ruclips.net/video/hQbPEvWmJXc/видео.htmlsi=5D0plB_CtAHUq13t
請問進入維修人員模式後，怎樣才𨍭到Total Calibration ?
感謝您，但是右邊的按鍵故障，校正左邊的面板後跳出了E0537。還是跳出需要找服務人員😔
我自己在測試過程中也曾出現E0537，我的經驗是漏按了亮紅燈的按鈕，如「沙漏」、「i 」。一開始我以為只要隨著按觸控面板上的指示，操作面板上的方格就可以，等到實體按鍵亮紅燈時，就停下來等待，結果就出現E0537，試了幾次都相同。建議您可以看一下我的文字說明，裡面有提及E0537及E0539出現的原因。
我做到出現button test，之後放回金屬圈順時針然後逆時針轉，之後按start鍵後有少少緊張慢咗半拍，就出現E0537錯誤。後來我關機後再重開，發現D制可以正常按到，咁我重使唔使再做一次？如果唔做會有問題嗎？
Per fare la calibrazione quali sono i passaggi ? In quale voce la trovo?
Touch Calibration
Did you guys have Error code E0539 appeared in the screen?
當出現「Button Test」時，若漏按了「on/off」、「start/off」及「向左、向右旋轉旋鈕」，便會出現E0539。 解決E0539的方法： 出現「Button Test」時，將圓環旋鈕放回，並進行以下動作： 2.3.1向左、向右旋轉圓環旋鈕 2.3.2按「on/off」及「start/off」 2.3.3按螢幕顯示的1、2、3、4、5、6 2.3.4按亮紅燈的按鈕。
Wauw. Thank you so much. This works. I phoned to Bosch, but they wont give me ANY information about calibration. Again thank you for this video..!!!
成功了太感謝了
Haw to get in technical settings?
ruclips.net/video/ZBc3XmEWTJU/видео.htmlsi=L9d95mB6CTuTgoGu
I have a HBG6769B1F
Thanks for this solution! That works for me!! But just after, the on/off button won’t work…😞 have you a solution?
Sorry，I could not help you .
That’s work with a piece of metal !
thx