Видео

7 months later you cant really find the majority of stacktech at lowrs

Hey Man, any update on how the Toughbuilt Stacktech is still holding up for you? And more importantly whats going on in your opinion about their future? Have you been able to aquire any more of their stuff? After researching and getting great info on them from quality vids like yours, I pulled the trigger and bought all three boxes available, the crate, the deep organizer, and the wood top. It was quite a move for me since im heavily invested in Dewalt and have a lot of both of their Toughsystem 1.0 and 2.0 boxes. However Toughbuilt excited me with all their fearures and possible future options like their transporter dolly.

When peeling stickers, always pull at a 90 degree angle to the surface and a bit slower, and you'll be all good

Any follow up half a year later?

Can’t lock the TB drawers. I’m going with Milwaukee.

I like that the crate has a holes on the sides because I can put a surge to charge my batteries

Wd 40 worked best for me

Wax and grease remover. You're welcome.

stack tech table tops going on two columns and dolly/carts

Ok, I had to comment. I play SC and love my Tough built set. I do not have the cooler, but own everything else you've shown in multiples. I think it's the best storage system even if t's options don't rival Milwaukee yet.

"To show dominance." Lol nice.🤘

Diggning your video. Thought I would be getting the packout system stuff for a camp kitchen chuckbox but after seeing your reviews and a couple other the Stackout system is the way to go. That shop you have there is pretty nice as well.

I believe the stocking issue is because Lowes has a 6 month contract to be the sole supplier for their initial release. That may be a rumour so take that with a pinch of salt. Out here in the UK we're waiting in suspense for release date.. All we have is a few utility knives, saw horses and the cliptech system

I am changing from Packout to StackTech after seeing whats coming this year... FINALLY a bottom rolling box that is a FULL SINGLE DRAWER!!! Bye Bye Packout!

Yeah super cool set up all the boxes on the cart with a miter saw on top and you can’t get in the boxes. 😂

They need a snap on cat crate ;)

Can anyone please let me know if the logos are easily removed? Would the yellow parts also be easily painted? I would like to repaint and use these as props, if anyone knows if it's possible please let me know.

Bro. It’s called Goo Gone. Or Goof Off if the sticker residue is really stubborn. Not rocket science. But thanks for the review, I want it now!

🇺🇸👨🏽‍🦳😃🫵🏽 … Dude ! 😃 Oh yeah 👍🏽 ! TOUGHBUILT , does have Two types of First Aid 🩹 kits , and they are out already , both of them are “ Red “ , in color and pre-stocked too ! 😃 .. Look for one of those folded up advertisements that comes with one of those big boxes . They list a lot of new accessories that in the pipeline to make it to the store shelves , pretty soon … 👍🏽👍🏽😃👨🏽‍🦳🇺🇸…( I’ve seen’em .. 🤭 )

Theyre coming out with a bottom rolling box that has a drawer instead of a lid. To me that automatically makes this the best. The ability to have all your bottom ones open from the front instead of the top means you can minimize the game of musical boxes you need to play in order to get the bottom stuff out. I really like the idea of your tools just following you around while they stay stacked up. Im honestly most curious about their powered accessories, how they will work, if toughbuilt will have battery packs ect? Are we looking at the start of a toughbuilt powertool brand, and its just their boxes came first? 2025 is going to be a very interesting year for toolboxes as stacktech rolls out and fills their lineup. What kind of new products and refreshes will we see from packout? Will other brands step up their game, like dewalt, ridged, flex, and klein. Will we see advancements from the entry brands like ryobi, kobalt, husky and craftsman?

Stacktech is great, however, you just can't get the stuff anywhere. I think they're tied to Lowes, and very few of the Lowes in my area have anything except for the most basic stuff, and most stores have literally nothing. May be worth looking at in another year or so. A bird in the hand is worth 2 in the bush, as the saying goes...

Don't switch to pack out yet, wait until next year. The kind of logistics and manufacturing they're dealing with are crazy AF. Im a painter and can't wait to get my hands on the box fan.

Get the dolly where these stack into. It’s great quality and super useful! Also the larger cooler is great also. It kept ice for a whole week. I got the trailer hitch mount also but haven’t installed it yet.

i am contractor too...i clean my tools almost everyday after use... your tool boxes so so so clean like brandnew... how you keep them so clean...no any kind of dust at all...no tools in your boxes...u said u throwing them around......i was hoping for honest review...sad...

Can you show cooling test for the cooler box. How many days can it maintain cool?

Does the stack come with a cat?

I'm thinking about geting a set of these tool box lowadout boxes and just seeing if they fit on my stair climbing hand truck

Lowes near me had them on clearance a few weeks ago. Probably not a good sign for long-term building the kit you want or end up needing

none of that stuff has been used.. This is FAKE.. Way to many moving parts.. Locking mech and latching system will fail.. cost is the same or more than Packout.. Why would anyone buy this stuff...

Thanks for the honest review. I've been using Ridgid crates for 6 yrs,they are more narrow and longer..and fit perfect behind center console. 2 people can still sit either side,and you can have a trashcan, jumper cables, snacks,duct tape zip ties etc. Country boy readiness. Ridgid latching sucks like every other system with side latches. I've run and modified packout for 4 years installing cabinets and also use for mechanical etc. Cons. They are not modular,some are wider and organizers have fixed handles that stick out. Cooler is POS and will not hold ice in the summer. The hand truck is also a plastic POS and needs the wheels moved out board so it doesn't tip over. But it holds levels,brooms and other long gear behind the handle. Lids and anything black gets to hot to handle in Ga,probably why cooler doesn't work. Lid in 30 minutes of sun in December was 154°. Double latches . Pro I own 40 boxes,and would be dumb to change. Latching tabs are easy to 3d print to hang modify and adapt. 1 hand continuous motion to unlatch/unstack. Multiple organizers in 3 heights,and 2 widths that can be stacked anywhere in/above/below a stack. The PO "cabinet" and Klein's (or one of the other brands has a deep drawer) are the only box with front access to a circular saw without unstacking. I like the modularity and transport options (allegedly coming)of ST. Wide drawers.. but too shallow of Dewalt. 3 drawer rolling boxes from several brands. Packout latching,easy 3d adapters, and quantity of organizers. Unfortunately the engineering on functionality is poor on them all. Multiple tool brands can share bits and blades,but continuity does in a storage system. system

The other thing to worry about is longevity of toughbuilt. Their stock has dropped 75% in the past 3 months and they sold 3 million worth of stock to raise capital… I mean any company could belly up, but it’s not looking good for toughbuilt…😮

I really wanted to love these but the weight is an issue. The 3 drawer tool chest is 8 lbs heavier than Packout totally empty. Also the compact thin organizers pop open. The scarcity is also a big issue. They look so much cooler than Packout though, and the latching mechanism is great. They're def overbuilt and feel bombproof.

So about the stickers. Leave them on for a bit. Ive found after they age a little. They peel off perfectly.

I can hardly wait for the full drawer lineup to be released this summer

I think your pretty spot on with your assessment of the StackTech system. Im seriously looking at these boxes as an upgrade from my Dewalt ToughSystem 2.0 but want to wait a bit to see if the dolly will be coming out as it is a huge selling point for me. Ive kinda already adopted a convertible dolly for my Dewalt boxes to work similarly so I know how excellent a dolly system like that can work. One thing ive seen a few others discuss and have personally tested at Lowes is that you can actually get into a box thats got another box on top without unstacking. It is a little fiddly but not too bad. You just have to unlock the above box, tilt it back just a bit so you can unlatch the box lid latch that you want to get into, then set the above box back down and it will lock back in, you can then tilt open the lid of the box your wanting to get into and grab what you need out of it, the above box will say attached, then once you close the box lid you just do the same process again to relatch the lid latch.

Tough built is coming out with a med kit this summer

Of all things to complain about….stickers not completely coming off 😂😂😂 If that’s a ‘no go’ for buying a product I wouldn’t hire that ‘tradesman’

You would be the only contactor that i know that lowes will do that for. Ive gotten where i dont wanna do business with them anymore

Where online can you purchase any of it, besides lowes and acme and amazon?

Stacktech has one flaw that is almost non- negotiable for any tradesman. The drawers do not lock. I will dig for my tools that I keep than wonder wear my tools went, cest'a vive. That said, I bought them. The track rails are more user friendly if you have a 3d printer. I made my own level and pry bar holders.

$150 if the wife is watching. You need to make a video with fake prices so that my wife can approve of me getting a few. 😂😂😂

My stickers came right off // I have an idea for Toughbuilt and it would boost up their sales

Neat trick, the extension cord holders will hold your folding ladders too. Fold them vertically and they’ll hook into the small rails securely!

Gotta use a blowdryer on those stickers! IM thinking on changing to these from packout

I dont even get why companies still put stickers on them, does anyone actually like it

The weight!!! how could you not mention how heavy they are

😑 *Promo sm*

Husky Connect 22 is better to carry up down. They also are easier to work out of while stacked with the drawer and canteliver units. The build could be a but better. When your in and out of multi-unit buildings for work , portability counts. These are BULKY...,

Класс такую же систему заказать планирую, но в России почему-то нет пока выдвежных ящиков, надеюсь скоро появятся

cat approved! now I know my tina will love these!