- Видео 46
- Просмотров 1 288 109
Stacy P
США
Добавлен 22 мар 2014
Rock picker RR-250
My business is laser leveling pastures and rodeo arenas. I level anything that needs leveled but sometimes I need to clean the property up. Rocks are a problem for animals with hooves. I remove rocks and debris before leveling any property
Просмотров: 570
Видео
John Deere 4044 loading homebuilt can scraper
Просмотров 264Год назад
I think this is about 1-1/2 yards
John Deere 4044 with homebuilt scrapers.
Просмотров 256Год назад
Seems to be a perfect setup for small areas. Not every project is tens of thousands of yards of dirt. I like smaller projects
Flood 2023 Camp Verde V-Copter falcon drone
Просмотров 606Год назад
Flood 2023 Camp Verde V-Copter falcon drone
Verde river flood 2023
Просмотров 354Год назад
The verde ditch company in camp verde builds a dam across the river every year to divert the entire verde river. The dam forced the water to cross jackpot ranch and flood our houses
Stormwater retention and drain in Camp Verde, Az
Просмотров 87Год назад
Built by the Camp Verde streets department.
Training video body language in a virtual setting
Просмотров 41Год назад
Training video body language in a virtual setting
Just another day, Song I don’t care by apocalyptica
Просмотров 892 года назад
This song is by apocalyptica
Going down south kiabab trail to the river then back up bright angel trail. Empire trip 2022
Просмотров 612 года назад
We were invited on the annual trip that empire machinery puts on. It’s a 1 day trip down south Kiabab trail to bright angel campground then back up bright angel trail in 1 day. Thanks to Mark for putting this hike together.
8K STEERABLE-pusher axle installed on big Tex trailer I already added air ride to
Просмотров 9083 года назад
8K STEERABLE-pusher axle installed on big Tex trailer I already added air ride to
Pusher axle installed on big Tex gooseneck trailer
Просмотров 9153 года назад
Pusher axle installed on big Tex gooseneck trailer
Homemade dozer update close to being done
Просмотров 1,3 тыс.3 года назад
Homemade dozer update close to being done
Homemade dozer running after engine swap
Просмотров 5584 года назад
Homemade dozer running after engine swap
Homemade dozer new engine and controls
Просмотров 5884 года назад
Homemade dozer new engine and controls
Cruising the Allison equipped Dodge.
Просмотров 1,5 тыс.4 года назад
Cruising the Allison equipped Dodge.
Air ride conversion on my BigTex trailer
Просмотров 24 тыс.4 года назад
Air ride conversion on my BigTex trailer
Crash - the scateboard riding bulldog
Просмотров 2294 года назад
Crash - the scateboard riding bulldog
Grain buggy for RC tractor to auger candy to kids during parades
Просмотров 1434 года назад
Grain buggy for RC tractor to auger candy to kids during parades
Shocker hitch installed on a Big Tex trailer
Просмотров 8004 года назад
Shocker hitch installed on a Big Tex trailer
👏👏👏
Nice vídeo 👏👏👏
Nice machine
Awesome stuff Stacy ❤❤❤ great footage 👌🏼
Vägev 👍👍🇪🇪
Thats Awesome
Would have loved to watch the video. But I can’t tolerate listening to a mouth breather for 10 minutes.
Fun projects like this sadly arent realistic anymore with the cost of metal nowadays...
pretty cool! i do have a question, did adding the air bags stop the back and forth jerking of the trailer that happens while towing on a rough road?
Not totally but it did help. It floats. I made a mistake by putting the shocker hitch on my trailer. If you have a standard hitch it helps to keep the porpoise movement to a minimum. Before I installed the shocker hitch it did actually pull without the surges.
Man so with the air ride the shocker is unnecessary?
What a great job, a lot off time and labor. It looks pretty heavy. Thank You
Thank you.
Simply amazing!
any chance you have a part number?
Love to know the pump and wheel motor sizes. Or where they come from. Great job
I don’t remember what those are specifically. I have changed pumps several times to get the speed I wanted. The drive motors I can see if I can get some numbers off. The pumps are cheap I use surplus center dot com for most of my stuff and eBay
The play trucks 😂😂. Im debating between CA or ATS
Looks mighty fine, excellent work
Korea 에서 구독합니다 와우 좋은데요
How does that work out at the scales does that axle carry a lot of the weight off of the rear of truck
Yes it does. I don’t do commercial anymore I only haul my personal stuff so I don’t have to worry about scales.
Have you put the pusher axle on the trailer yet I would like to know how that works out
Yes there is a video of it
Respects
That would be a "FIAT RAM"
Would he want to sell it
Could you do a 22GN or know someone can ?
Yes I can do any trailer
Why do they need to divert the river? Are they paying for damages and clean up? Why is this allowed?
The canal companies along the verde river have the power to do anything they want. Still the old west. If you contact The verde ditch company they will have their attorney attack you. They lie about everything and get away with it.
Normally lockup is after 2nd gear
I like that trail. I would like to know wood you do my diamond c 53 ft step deck 7 axles in total but one steering
I would love to see more
What's the rough 3rd gear shift all about? ANY word from ats about that?
I really don’t know but Supposedly it’s a shift inside the transmission from a low to high range or like a shaft change. The transmission was built to handle 1,000 HP with a GVW of 56,000 pounds at 100% duty cycle. I don’t know transmissions so I can’t say but it’s been several years now and it’s still exactly same.
@@stacyp4534 I wonder if the stage 1 Allison's from ats do the same. ATS is about to release the kit for the early 3rd gens. I'm told should be ready by the end of this month. Can't wait to get this crappy 47re on the garage floor
@@hey_youtubeim_back2159 I gotta say I have been extremely happy except for the leak I cannot find. I have had the transmission re-sealed, I’ve had the torque converter pressure tested, I’ve changed the transmission lines twice and I cannot find the leak. Any help on this would be greatly appreciated
@@stacyp4534 are you using an external fluid cooler or is it the one that goes into the radiator? If you're using ELC coolant is it possible that the red transmission fluid is mixing with the coolant and you just don't notice it or is the league prevalent enough that you have to add transmission fluid on a regular basis?
Aside from that I would check the top of the transmission for leaks out of the Overflow vent
Awesome videos and channel Stacy. Loved and subbed from Canada. You know!
Used to live in Arlington and cross that bridge to visit my cousins in Gila Bend 😉
fajna maszyna ale silnik jednak za slaby
I wanna do this to my 07 ram 3500 5.9l. Single cab, rwd, 4 inch straight pipe dual smoke stacks. I was surprised at how good of mpgs it gets stock but I think that's cuz it's a 2 door not a 4 door. I can't wait to find out what the allison might give me.
Amazing work super model..bulldozer explained..hope your well have super day !
Amazing work super model..bulldozer explained..hope your well have super day !
Stacy, you mentioned that you broke the frame of your truck, what type of weights were you hauling and for how long? Also, did the failure have anything to do with the rear suspension modifications that you made for the air ride? Did you do any welding or or cutting in those areas? Reason I am asking is I am going to be running about 4500 pounds over weight pulling my 5th wheel camping trailer. Don't like the cost of the new trucks right now and I still like my 04 Dodge dually. I think I need to find Cad and Chassis or 3500 and look at and measure the frame rails to see what is currently on the market as a comparison. Bob
When I broke the frame I was hauling with the trailer about 36,000 pounds. Plus while doing the air ride modification I had welded to the frame on the bottom. That is exactly where the frame broke. It didn’t really break it ripped the frame kind of pealed it. It was too much weight combined with welding. The frame on those dodges is very capable.
@@stacyp4534 Thanks for the reply. Its to bad that you lost this great ride. When I had read that you had modifies the suspension with the bags and four link, I kind of thought there might have been some welding involved. I know that when I bought the 04, there was a lot of chatter about Dodge not wanting you to do anything to the hydro formed frames, in fact they didn't want you to drill any holes. I know it is not going to be the best but I think that I will be OK at about 26,000 GVW. I am going do some more research to verify that there is a TCM to work with the 04 platform so I will be able to all the functions of the truck. Have to keep the wife happy if she need to drive the truck. I am looking to have the truck function as close to original as possible. I think there is someone by the name of Jason that has the programming down. I am looking to use a SAE #3 Allison transmission bell housing along with the Cummins adapter, allowing the use of the Dodge starter on the left side of the engine. I need to start looking for some old school bus's to locate these parts. I have the wacky idea of replacing my 5.9 with a Cummins 6.7 crate engine seeing that I done need to worry about EPA requirements. It would be much cheaper than replacing the truck with a current model. Did you upgrade the transmission with billet input and output shafts? Any problem with the flexplate? I know that you were pulling a lot of HP from your engine.
Stacy, I see that you had 3.73 gears. Did you do any pulling in the mountains with the Allison and 3.73's? I am running 4.10's and talking with Dually Depot in Elkhart Indiana, they thought that was 2 much gearing and the 3.73 would be better. With the HP and Torque you had, the 3.73 would have been no problem.
@@sandipelczynski8003 I still have the truck. It’s a monster even in mountains. I fixed the frame then fish plated it. Totally rebuilt. I now mostly use an international CV-515 but the dodge will run circles around the international.
I know this might be a little late. Thanks for the information on your Allison swap. This video is giving the information that I have been looking for as far as RPM VS MPH. I am considering this swap for my 04 Dodge 3500 Dually with a 48 RE as I don't like the gap between 3rd gear and 4th. I am also starting to pull a 18,000 5th wheel trailer. My truck is running a Hypertech tune so the shifts can be a little hard under load. I am trying to run as much as I can with Tow/Haul off to keep the rpm's down and fuel mileageup . When the transmission drops out of 4th and the converter unlocks, it sounds and feels like the trans is going to come out of the truck. I am a little confused with the RPM vs MPH that you are running in the video. What is your rear end ratio? I am running a 4.10 gear. At approx. 60 mph, I am running about 1800 RPM and the only difference that I see is a .09 difference in the final drive ratio, .61 for the Allison vs .69 for the 48 RE. I don't think a 3.73 vs 4.10 would create a 20 MPH difference. Hope you see this and reply Thanks, Bob
Hi, the rear axle ratio on my dodge is 3.73. My son in law locked up the rear axle as the dodge axle carrier is made of cast iron and the spider gear pins wear grooves in the carrier then cause the rear axle to lock up. I put an old school Detroit locker in it with everything in the axle new.
For 13k that shit better work on my dash ... I trade my 08 duramax in for a 17 Cummins with a built Trans and I still miss the Allison only thing I miss
Posted in 2019 ... so what's up how's it holding up ???b or did you blow it up???
shift just like allison b400 in a bus
Сплошеая хвальба ни одного мнения по делу, пропорции да! Вроде ничё, сойдёт, дизайн хорош... а вод двигатель явно слабоват, он же не прёт, дергается при малейшем сопротивлении... лопата слабая, для опилок? Явно грунт не берет... значит, он какое практическое применение имеет? Зачем он такой и кому он такой нужен?
Hey! Im from Supercar Blondie! We would love to feature you on our channel! Do you have an Instagram where Alex can reach out to you? Or an email? Thanks
Hey! Im from Supercar Blondie! We would love to feature you on our channel! Do you have an Instagram where Alex can reach out to you? Or an email? Thanks
I wish I knew how to do stuff.
What does the wiring look like is it clean looking or a rats nest
The wiring is very neatly done.
Nice!
존경합니다!!!
Hey love your videos, do you have an instagram too? if so what is your username?
Hey love your videos, do you have an instagram too? if so what is your username?
Hey love your videos, do you have an instagram too? if so what is your username?
Hey love your videos, do you have an instagram too? if so what is your username?