Видео

Sir Is this legal in every state in other words will I have a problem with HOA fining me in the community of oases ranch?

Thank you for this video. I have a beautiful black Polish hen that can't see. I am going to trim her today!

To be legal chains must be welded to a trailer. The chains need to be load rated to suit your trailer. The ones you are using are way too small. Get some advice from your local DMV they will set you straight. If you had a collision with these chains bolted on your insurer would not pay out on your policy

Thanks for the video.. I will be changing my oil for now on!!

Came here to find out what size socket I needed. Thanks bud!

What breed is the chicken that went in the water at 2:35 minuets?

Any hints on getting all the paint out of a gallon can? Mine leaves about 1 1/2 inches in the can......

i had a question bro if you can answer it i would appreciate it so i just recently cleaned my throttle body on my 05 gmc sierra 5.3 just because i had no check engine light on for it before so after i cleaned it i installed everything back the right way and did the 3 minute idle re learn well tried now when i turn it on it warms up good but once it warms up it starts to surge the rpm goes up and down then when i put it in reverse or drive it revs up and going into gear or to reverse, drive any when i drive it and give it a little pull to see it it feels good i feel good normal power but as soon as i let go the gas now it stays reved up or accelerated then once i come to a stop the idle kind of goes down like slowly and just starts surging again do you think this could be my problem or what else do you think it can be i replaced air filter cleaned my maf sensor do you think this may be the cause of that before my truck wouldn’t do that it would die out coming to a stop though so i would just hold the gas to keep the idle from dropping all the way and stalling the truck but now it doesn’t let me even do that cus when i try it revs up on its own until i drive off so we ended up trying a new tb but i guess that didn’t work either , some shop said i needed a tune up and that didn’t fix anything either , so im over here trying to find something do you have any clue what can cause the rpm to surge go up and down after warming up , but when they did the tune up at a shop , they did my spark plugs , spark plug wires and cleaned my injectors thinking it was that and nothing it still kept doing same thing so do you know if this is related a mechanic told me that it can be that or my maf sensor but i had replaced that one with a used oem one so i dont know if i want to try another maf sensor but i kinda want to try the tac module sensor i don’t know if it seems like the same problems im having

Good looking truck

Nooice! 😎 STOC

Are you in Ybor?

The babies are so cute. Funny how they know what to do until it's time to go in at night😂

API rating SP oil 0w-20 is, 5w-30 not always. Need SP for direct injection engine.

I have some bricks in mine just covered in water. Also, ice cubes in the water. They love it.

Part numbers?

I believe the SAE 0w-20 weight oil is recommended by GM for trucks with Active Fuel Management. The AFM lifters modulate the engine changing between 4 and 8 cylinders. In 8 cylinder mode, the locking pins in the lifters are pushed outward by spring force, locking the pin housing and outer housing together causing the lifter to function as a normal lifter. When in 4 cylinder mode, the locking pins are pushed inward with engine oil pressure directed from the valve lifter oil manifold assembly solenoids. I've found over the years that it's always best to use GM recommended specifications for oil and use GM parts.

Really appreciate the start to finish. Looks great, hoping mine will be too 🐔 🐥 🤩

Yes gotta keep those babies hydrated 🍉🍉 It’s so dang hot here in Georgia, betting it is there too! 🥵

They do love their 🍉 So stinkin cute!

My question is… how are you going to clean the run? And at the ends, it’s still open as you didn’t do chicken wire.

Led lights even halogen light cannot be used for shrimp fishing.. with old incandescent lightbulbs ,the shrimps eyes glow bright..

You get a view and a thumbs up from me!!

😂😂😂 I did this before I watched any videos and I put one of my chickens in there and she did the same exact thing 😂😂. She just stood there like that for a few mins and then hopped out. It did look like she started to lower herself down into the water a little bit, but she did this exact same thing 😂😂

I literally just filled a kiddie pool with water and put it with my chickens. I have no clue if they would use it or not sooo I decided to come look on here after I put it in there with them 😂😂.

Great job! I'm thinking of doing a bar top on the same way. Thanks for figuring it out for me.

We are still married after this somehow😂

In my opinion, a 2700K or 3000K LED would be better, as the lighting would be better but without losing the retro look of the yellow light from incandescent bulbs.

? or raw?

Don't forget Marshmallow ❤

It’s Florida so we do what we can to keep them cool

My Grandma had chickens and guineas when i was young but i don't think she knew of this.

Please share the part number of the kit that worked. Thank you

Great. Looks like it fills quickly

I used 1305 Beer caps on my bar. I started with hot glue, but a lot of caps weren’t stuck down the next day coupled with the expense of the glue sticks I switched to GE silicone. My wife complained about the smell of that stuff so I switched again to acrylic silicone. At 3 bucks per tube at Lowe’s, I used up 14 tubes of the stuff.

In autozone is $184 And in amazon its $48 Do you recomend the amazon canister

Letting it dry outside?! oh dear

No comments??!! Whaaaat. I just made a beer bottle cap table .. Well, I bought the table and added the bottle caps. Im also making a video. Ive been collecting bottle caps since 1993?!?

You guys know what's required to care for those chick's before they can be with the adult flock? They never assimilate together. You will always have 2 flocks. And those chick's need to be as large as your adult birds before they can be allowed to mingle with the adults, or the adults will just pick in them, unless you have a very large area for the new birds to be able get away. Good luck.

I've really been enjoying your pallet chicken coop series! I love what you've done with it all. Thank you for recording every step of the way. It gives a realistic view into how it is to own chickens. Great job!

I have this same Jack mid 90’s sears craftsman. Been looking for a repair kit and/or serial/model number mine is also wore off. This Jack has been is service for almost 30 years they just don’t make them like this anymore. Thanks for the video I wish you had better luck, it would have helped me.

this helped me man thanks now i save myself $150 bucks

I firmly believe, but cannot prove, that the EVAP system on these is horribly designed such that if you fill with a gas can or add a fuel additive into the filler neck some goes into the EVAP system instead of the gas tank

Super filmik 🎉

Awesome idea. What you happen to know the dimensions of the coop?

Thanks for showing what this attachment can do. I've bought it from Amazon.

I LOVE CHICKENS!!

Thanks, dad. Really :)

We have had a problem as well. We noticed lots of underground tunnels. Hubby built a few wire cages to put over the holes the rats created and set snap traps in them. Been catching these suckers every night. We are in the process of digging out the entire chicken run so we can put hardware cloth under ground and wire it to the hardware cloth sides. We plan to add hardware cloth on the top as well under the roof. We remove all food and water at night in the run as well. It's not a cheap project as our run is 30 foot by 15 foot. We do let the girls out to free range in the yard during the afternoons when we are outside with them.

I think eurono what you doing

Thanks Roni, I’ll have to try that with my hubby! 😂😂 great job guys, hope it keeps those buggars out. Sending cuddles for Baby, she’s such a little beauty 🥰