Видео

Thank you so much for this video! I long arm for a living and my entire upper tension unit fell off the machine this morning. Because of your video I got my machine back up and running!

Do I have to remove the machine in order to level the frame? I enjoyed your instructions and I’m going to test it out.

Do you have a video on how to raise the height of the studio frame with an Amara on it? Mine is set too low. Do I have to disassemble the whole thing in order to raise the height? In the handy quilters video on how to put the frame together, they said, set it at the lowest height. I thought by the end of the video they would teach you how to set the height, but they never did. I’m not the one that put my frame together originally, and now I realize it’s too low and it’s hurting my back. Secondly, do you have a video that shows how to install properly the handy hammock? I bought one and it came with no instructions, and it was completely useless, and I had to jury rig it to get it to attach to my frame, but now I can’t take it off if I need to. So I’m wondering if there is a proper way to do it? And if so, do you have a video for that? And if not, would you consider making a video of that? Thank you very much!

I had seen this years ago and never had an issue until today and you saved me a 3 hour round trip back to the dealer. Thank you!!

Thank you!

Thank-you so much for these videos - they have just helped me reassemble a new to me 10 year old HQ Avante - I am so grateful! 🙂

I can't seem to find any helpful videos on how to disassemble/ take it down. I am moving and have a Pearl frame. Now I am not sure how to take it apart. It would be nice to have a video on a take down. Thanks

Thank you!

My babylock coronet is rocking on its carriage. It does not have the top screw you are referring to. Help

I have an Amara. I contacted my retailer, purchased and replaced the chech spring three times. The longest one lasts is a month now. Will you please tell me where else I can purchase them and keep a bunch on hand? Also, any idea why after five years my check springs will not last now? Now my tension is a mess. I have reset it several times and if I have to move it a crank, it goes back to zero. Can't use the thread break sensor now either. I quilt every single day for customers; I can't handle my machine being out every few weeks.

Thank you so much for this video nd explaining how to use the shims. I was able to fix the problem I have been struggling with for years!!! Thank you, thank you, thank you!!!

Thank you, Thank you! I didn't know the spring had to bounce the bobbin.

This was very helpful, thank you. Now the carriage that has 8 wheels that rolls on the frame rails, only 7 are touching. How does a person adjust one wheel in order for it to roll with the other 7?

Nolting long arm table

Hi, We would like to sincerely thank you for taking the time to create both videos about proper assembly and alignment of the longarm frame. Your expertise and detailed presentation of the material helped us tremendously as we were finally able to correct the issues with our frame. Thank you again.

where can I buy a check spring?

The video is good. But I were hoping to have seen how to put on the stoppers. Since I can not really see how it is done in the manual.

Thank you, Thank you, Thank you! This is critical information, instructions provided by the manufacturer are less than ideal. Even though I'm assembling a King Quilter, this was worth watching 👀 Will be looking for more of your videos

This was very helpful! Thank you for this simple fix!

This video saved my sanity!

Excellent video. Thank you.

Do you have a video for a Handi Quilter 24 Fusion check spring replacement

I have the Amara. And I’ve had issues with my tension changing as I quilt. What I mean is that my tension dial is not remaining in the position I set it at. Is there a way to tighten the knob?

I got into a jam and you pulled me out. Thank you for this video, it was clear and concise and just what I needed to replace a broken spring.

When I got my 12 ft Studio frame my track came already attached to the sections. I installed the black rubber strips. I have bumps at the both places the sections go together. I see you have one 12 foot rail. Where did you get it? I am hoping that will correct those darn lumps and bumps that are driving me crazy.

I so appreciate you creating these maintenance videos. I live almost 2 hours away from my nearest dealer so I have forced myself to understand every little foible about my machine. Thanks so much for creating this channel. Very informative.

I would like information on getting stitch regulation for my machine

OH MY GOSH!!! You saved my life! I recently moved and discovered my hubby's timeline for completing my sewing room, and my timeline were off by a bit LOL... So in attempting to put my frame together so I could get back to work I realized that I had no idea and the manual was not too helpful. Thank GOD I found Longarm-Tech and these awesome videos! I subscribed immediately! My frame is more stable and level than it has ever been! My HQ Amara is so happy and so am I!

Finally, someone has explained this to me! Thank you!

Thanks! I tried to explain this to hubby and your explanation is better and the analogy of fishing helped. 😁

My machine isn’t rocking the same way. It has issues with the wheels that ride the length of the track. When the machine is in a forward position the rear right wheel catches in places but doesn’t consistently ride the track. Conversely, when the machine is in the rear position the front left wheel is catching in places but doesn’t ride the track consistently. This long arm purchase has been a nightmare from the onset. It came out of time The bobbin spring was set too high. The table was wonky. Some track pieces were machined to different heights. And I’m still dealing with this issue. It’s been 3.5 years of absolute dread to work with this machine. The technicians that are servicing my machine and table issues don’t seem competent and I’m stuck dealing with them. I made the mistake of buying this as a floor model that has never been set up. The shop owner didn’t have the space to erect it and was happy to have a buyer. I almost completely regret this purchase. I just wish I bought it somewhere else and didn’t get a lemon.

I have a BabyLock Jewel on a Grace Pinnacle frame and would love to be able to put hand wheel on the bars. Any suggestions to a DIY for it?

Thank you for giving me the confidence to troubleshoot and repair the problem with the check spring on my Simply Sixteen! No more broken threads!!

Thank you so much for creating such a clear and detailed video. You are a techno-dud, my kind of guy! I just moved my frame a few inches on an uneven floor. I’m going to use both of your videos to recalibrate the whole frame. Thanks again!

thanks!

I currently have a 10 foot continuum grace frame and I would like to purchase a baby lock regalia longarm machine will that machine work on that frame

I spent the better half of two years dealing with tension issues. I was ripping out half of every bobbin I put into each of my quilts. I was able to troubleshoot it down to the bobbin case. So I replaced it and that didn’t fix the issue either. No one from the quilt shop I bought it from or the manufacturer could figure out what was wrong. I was so close to sending the machine back to the manufacturer. But I happened upon a video that touched on the spring height. Sure enough I adjusted the spring height and my issue was resolved. So many hours of negative work and total frustration over the slightest adjustment! For that reason I suggest there be a more descriptive video concerning the bobbin spring and what the symptoms are that indicate it is a potential issue. For me the spring was set too high resulting in a tension change about halfway through every bobbin. I tested the theory with a Towa tension gauge and pulling entire bobbins through it. By the time I got to the end of the bobbin the tension was so tight it registered off the gauge. Seriously, on just one quilt I spent over 17 hours ripping out stitches! I can now quilt entire quilts without having to rip one stitch!!!!!

What is the indicator / symptom that occurs for this to need replaced?

I so wish I had found this video when it first was posted. I spent a year working with the shop I bought my machine from getting the table leveled! I wasn’t permitted to make any adjustments myself or I’d have to pay for them to come and fix it. It was a complicated situation. Needless to say, after a year and several visits to my house, my husband made the last adjustments to get the table to the point it should have been when we bought it. What a nightmare! I will show these to the hubby and maybe we can consider investing in some of the tools you are employing. Thanks for sharing!

Thanks Keith. This video is wonderful!

Great video! My longarm is coming in a few weeks...

Wish had a closer look

Thank you! I will be getting a digital level to use along with my spirit level and rechecking/doing my frame!

Thank you!

Just watched this, thanks for this information. I knew I had one, but didn't know it was a thing to check out. I also didn't know to take the bobbin out if not sewing for several days. Thank you for this info!

thank you this information. Love the videos. stay with us. Jodie

Hi, I hope you are available for questions. I just obtained an HQ 16 that is about the same age. Would the True stitch work for my machine? OR Do I have to bring it to a dealer to add stitch regulation and what would that cost?

0:26 sexygirls-here.online