Kool Fred’s Garage
Kool Fred’s Garage
  • Видео 55
  • Просмотров 44 604
Test Fitting wilwood rear brake calipers and brake lines - 1973 Chevy Impala
"73 Impala rear Disc Brake Conversion & Suspension work series" Test fitting the Wilwood rear brake calipers, installing the brake line hose kit and mocking up the tab on the rear end to hold the brake hose. It’s always a good idea to test fit all your parts. @KoolFredsGarage
Просмотров: 49

Видео

Installing axles & Test fitting thicker C-Clips to correct axle offset, 1973 Chevy Impala.
Просмотров 837 часов назад
Installed the axles so I can begin test fitting the reset of the brake kit. To correct my axle end play I used thicker axle C-Clips from TCE Performance. I also install the rotors & show some of the essential parts and tools that I need to complete this project. @KoolFredsGarage
Modifying Parking brake brackets & test fitting Wilwood rear disc brake kit on the 1973 Chevy Impala
Просмотров 4021 день назад
Had to do a bit of modifying to the parking brake brackets so the fit properly. Out of the box there drilled to except 3/8 style bolts, my rear end has 7/16 with are bigger and stronger so I drilled the holes out a bit to except to bigger bolts. Also had to do a bit of trimming with a rotary tool.
Test Fitting the mounting brackets for the Wilwood rear disc brake kit for the 1973 Chevy Impala
Просмотров 5621 день назад
Test Fitting the Parts to Make sure they fit. 1973 Impala Rear disc brake conversion in the works @KoolFredsGarage
New Hardware! Nuts & Bolts for the Chevy rear disc brake conversion.
Просмотров 6821 день назад
Just picking up some new Nuts and bolts for the Chevy for the New Wilwood Rear Disc brake conversion kit from Tractor Supply Co and also picked up some new driveshaft bolts from Lowe’s. Ck out the playlist for the Rear Disc Brake conversion kit & Suspension work on the 1973 Chevy Impala. ​⁠@KoolFredsGarage
Unboxing The Wilwood Rear Disc brake Conversion Kit For the 1973 Impala
Просмотров 103Месяц назад
In this video I unbox the modified/ custom rear disc brake conversion kit from Quick Performance for my 1973 Chevy Impala. I unbox the kit and check the parts. Stay Tuned soon this kit will be installed on the vehicle.@KoolFredsGarage
Unboxing new rear Spohn control arms & measuring axle c-clips for the 1973 Impala.
Просмотров 45Месяц назад
this is the 2nd video for the 73 impala rear disc brake conversion and suspension upgrades. unboxing the Spohn control arms from Spohn Performance. adjustable upper and boxed lower powder coated black. also measuring the c-clip thickness so i can correct the axle end play. stay tuned to videos to come @KoolFredsGarage
GM Rear disc brake Conversion Homework. Disassembly & Axle Housing Measurement.1973 Chevy Impala
Просмотров 143Месяц назад
In this video im preparing to do a rear disc brake conversion on this 1973 Chevy Impala. These vehicle can have several rear ends. So to make sure I order the right stuff. I removed the drum brakes, took pictures and recorded some measurements so I can get the correct parts. Doing this homework up front will save time and headache and will keep me from returning parts that won't work. This is V...
Ram 1500 Fuel Pump Replacement, 2009-2018
Просмотров 1103 месяца назад
In this Video I replace the fuel pump on my 2016 Ram 1500 to correct a code causing the check engine light. P0463: Fuel Level Sensor 1, Circuit Too High. Replacement part used: Delphi Fuel Pump part #: FG1439. @KoolFredsGarage
Ram 1500 Fan Clutch Replacement, 5.7 Hemi V8
Просмотров 4003 месяца назад
In this video i diagnose and replace the fan clutch on my 2016 Ram 1500. The replacement part is a GPD:2911370 @KoolFredsGarage
Replacing The Water Pump Pulley W/March, GM Serpentine Belt Drive, 1973 Chevy Impala
Просмотров 1253 месяца назад
In this video i swap out my water pump pulley to an aluminum March water pump pulley and change the belt. replacing pulley due to some wear on the original GM Pulley from the donor vehicle, pulley has some surface rust on it causing wear to the belt. @KoolFredsGarage Pulley is March Performance part#4300-4310 from summit racing Drive Belt is AC Delco: part# 19244944 from rock auto
73 Chevy Impala New LED Headlamps Installed. Testing the LED Headlights. Part 2.
Просмотров 1193 месяца назад
In this video I complete the LED Headlamp install on the 73 chevy Impala & show u guys the finished product and the functionality of the New LED headlights. This is part 2, see part 1 for more detailed info. I installed new headlamp buckets w/trim rings from OER, LED headlamp s w/slim back, new set of screws and new springs. Below are descriptions of the parts I Installed and where I got them f...
Upgrading To LED Headlights On Your Classic Car - 1973 Impala, Part 1
Просмотров 6224 месяца назад
I finally found some LED headlights that will work in my classic ride with little or no modifications. I’ve been through 2 others sets of led lights but they just required to much work to get installed & I destroyed one of the original headlamp buckets attempting to make it work. In this video I install new headlamp buckets w/trim rings from OER, LED headlamp s w/slim back, new set of screws an...
Starting the 406 SBC Engine After Repairs - 1973 Chevy Impala custom, Part 7
Просмотров 4315 месяцев назад
starting the 406 Small Block Chevy V8 engine after recent repairs. Replaced a clasped lifter and ungraded the guide plates on the Aluminum AFR cylinder heads with 2 pc Guide plates to improve reliability. @KoolFredsGarage
Reinstalling The Fitech EFI & Setting the Timing on the 406 SBC, 1973 Chevy Impala, Part 6.
Просмотров 3815 месяцев назад
Reassembling the Engine components & accessories to get this engine back running. reinstalling the Fitech EFI fuel injection, Dropping in the distributor to get the timing set. This video is a part of a series where is replaced 2 lifters and installed 2pc guide plates on the AFR cyl Heads. Engine is almost ready to run stay tuned. @KoolFredsGarage
Installing The Intake Manifold on the 406 small Block Chevy,1973 Impala part 5
Просмотров 2055 месяцев назад
Installing The Intake Manifold on the 406 small Block Chevy,1973 Impala part 5
Completing The Install of the 2pc AFR guide plates. 406 SBC,1973 Chevy Impala, Part 4
Просмотров 2155 месяцев назад
Completing The Install of the 2pc AFR guide plates. 406 SBC,1973 Chevy Impala, Part 4
1972 Ford Gran Torino Sport, 351C Day 6, Installing Throttle cable and replacing fuel sending unit.
Просмотров 1546 месяцев назад
1972 Ford Gran Torino Sport, 351C Day 6, Installing Throttle cable and replacing fuel sending unit.
Installing 2TB Western Digital SSD SN850X in PS5 Game Console
Просмотров 8026 месяцев назад
Installing 2TB Western Digital SSD SN850X in PS5 Game Console
Replacing lifters & Installing 2pc guide plates on AFR Cyl heads - 406 sbc, 1973 Impala,Part 3.
Просмотров 1,4 тыс.6 месяцев назад
Replacing lifters & Installing 2pc guide plates on AFR Cyl heads - 406 sbc, 1973 Impala,Part 3.
Disassembling the Small Block Chevy 406 V8 to get to the Lifters - 1973 Impala, Part 2.
Просмотров 8676 месяцев назад
Disassembling the Small Block Chevy 406 V8 to get to the Lifters - 1973 Impala, Part 2.
Diagnosing Rocker Arm Noise on Small Block Chevy 406 V8, 1973 Impala, Part 1.
Просмотров 7756 месяцев назад
Diagnosing Rocker Arm Noise on Small Block Chevy 406 V8, 1973 Impala, Part 1.
Radiator & Thermostat Replacment on 2008 Lexus ES 350, 3.5L V6
Просмотров 3,4 тыс.7 месяцев назад
Radiator & Thermostat Replacment on 2008 Lexus ES 350, 3.5L V6
Radiator Replacement 2013-2019 Ram 1500 Pickup Truck.
Просмотров 1,6 тыс.9 месяцев назад
Radiator Replacement 2013-2019 Ram 1500 Pickup Truck.
1973 Ford Gran Torino Sport , Wrapping up the fuel pump install and coolant hoses. Day 5
Просмотров 21510 месяцев назад
1973 Ford Gran Torino Sport , Wrapping up the fuel pump install and coolant hoses. Day 5
Wiring up the Auto Meter Gauges for the 1972 Ford Gran Torino
Просмотров 9610 месяцев назад
Wiring up the Auto Meter Gauges for the 1972 Ford Gran Torino
Ram 1500 Front & Rear Door Speakers Upgrade, Infinity Reference 6x9 speaker 9630Cx Vs 9633ix
Просмотров 10 тыс.10 месяцев назад
Ram 1500 Front & Rear Door Speakers Upgrade, Infinity Reference 6x9 speaker 9630Cx Vs 9633ix
72 Ford Gran Torino Sport , Connecting Gauges, Wiring & Coolant hoses. Day 4
Просмотров 24811 месяцев назад
72 Ford Gran Torino Sport , Connecting Gauges, Wiring & Coolant hoses. Day 4
1972 Ford Gran Torino Sport EP 3. Ford 351C, Installing the fuel Pump, Fuel lines & fuel pump relay
Просмотров 27411 месяцев назад
1972 Ford Gran Torino Sport EP 3. Ford 351C, Installing the fuel Pump, Fuel lines & fuel pump relay

Комментарии

  • @VinoRatRodbuilds
    @VinoRatRodbuilds 3 дня назад

    Great progress Mr. Kool!

    • @KoolFredsGarage
      @KoolFredsGarage 3 дня назад

      @@VinoRatRodbuilds Thanks! the car has been done for some time now just got to edit the rest of the footage.

    • @VinoRatRodbuilds
      @VinoRatRodbuilds 2 дня назад

      @@KoolFredsGarage Kool ! I'm waiting on a Ford 9-in. I have a 56 Chevy rear end in my car. Doing a lot of body work right now. It just takes time. It's all good. I keep saying this summer I will be driving the car. Well not this summer. 🫣

  • @liangxizituobagan
    @liangxizituobagan 11 дней назад

    Hello, fred. I am a supplier of brake accessories, I have my own factory, if you have any products you need can contact me, and can you customize the products

  • @edwingrodriguez3214
    @edwingrodriguez3214 22 дня назад

    Can you tell me your experience with the dash corner speakers, i saw some bad reviews on infinity about they distorted around mid level volume.

    • @KoolFredsGarage
      @KoolFredsGarage 22 дня назад

      @@edwingrodriguez3214 I did not use the tweeters or the crossovers I. This kit. For the corner das speakers I used the Infiniti Reference 3032CFX. They are super clear and are. Day/ night difference from The stock ones. Concert style highs.

    • @edwingrodriguez3214
      @edwingrodriguez3214 22 дня назад

      @@KoolFredsGarage thank you , that's what I needed to know

    • @KoolFredsGarage
      @KoolFredsGarage 22 дня назад

      @@edwingrodriguez3214 no distortion very clear that’s for the 3032cfx & my truck has the upgraded Alpine sound sys from factory. The standard sys may sound different.

    • @edwingrodriguez3214
      @edwingrodriguez3214 18 дней назад

      @@KoolFredsGarage you were right ,they sound amazing with the alpine system, thanks

    • @KoolFredsGarage
      @KoolFredsGarage 18 дней назад

      @@edwingrodriguez3214 No Problem!

  • @KAKNOWN_
    @KAKNOWN_ 22 дня назад

    Ready for part 2 🔥

  • @MOTOWNN
    @MOTOWNN 23 дня назад

    Todd over at TCE Performance has some very nice Willwood brake kits for your car a 16” 15” , and a 14” 6 piston front kit , I have his 15” kit.

    • @KoolFredsGarage
      @KoolFredsGarage 23 дня назад

      Yeah I know about those. I wanted a parking brake kit for the rear. I may consider if I decide to upgrade the front. Thanks!

  • @TheHalusis
    @TheHalusis 24 дня назад

    did you use an amplifier or was the stereo sufficient?

    • @KoolFredsGarage
      @KoolFredsGarage 24 дня назад

      @@TheHalusis I just used the factory system. It is sufficient. The truck already has the upgraded Alpine system.

    • @TheHalusis
      @TheHalusis 24 дня назад

      @@KoolFredsGarage thx, i did some research as well. been a min since i messed around with sound systems

  • @udeserveitenterprise1166
    @udeserveitenterprise1166 24 дня назад

    🔥

  • @udeserveitenterprise1166
    @udeserveitenterprise1166 24 дня назад

    Tuned in keep the projects coming very informative 🏎️

  • @VinoRatRodbuilds
    @VinoRatRodbuilds 24 дня назад

    Nice job fred! 👍

  • @VinoRatRodbuilds
    @VinoRatRodbuilds 25 дней назад

    Looks great Fred! Lot of fun putting upgrades on your car that's for sure.

    • @KoolFredsGarage
      @KoolFredsGarage 24 дня назад

      @@VinoRatRodbuilds Thanks! A bit of modifying but everything worked out perfect.

  • @VinoRatRodbuilds
    @VinoRatRodbuilds 25 дней назад

    Yeah we don't have a tractor supply. But I have found Ace hardware is really good with their bolt selection. 👍

    • @KoolFredsGarage
      @KoolFredsGarage 25 дней назад

      @@VinoRatRodbuilds I’ve used bolts from Ace too, Quality stuff Just don’t get to go often Because they’re further away.

  • @KAKNOWN_
    @KAKNOWN_ 27 дней назад

    More videos pls ❤️‍🔥❤️‍🔥

  • @udeserveitenterprise1166
    @udeserveitenterprise1166 Месяц назад

    Very informative ❤

  • @bossman6449
    @bossman6449 Месяц назад

    Man I need help with my 73’ Impala, I’m in Ga

  • @dtaposse8858
    @dtaposse8858 Месяц назад

    Nice video an good looking truck

  • @Jayfrmyt
    @Jayfrmyt Месяц назад

    Can we get some driving footage bro

    • @KoolFredsGarage
      @KoolFredsGarage Месяц назад

      There is 1 on my channel from last year. I’ll get some more soon.

  • @scraplifeO
    @scraplifeO Месяц назад

    I got the some fan and it so loud

    • @KoolFredsGarage
      @KoolFredsGarage Месяц назад

      I noticed that to from time to time it’s usually on a hot day.

    • @KoolFredsGarage
      @KoolFredsGarage Месяц назад

      I am debating whether to switch to the mopar one or not.

    • @crimi1607
      @crimi1607 11 дней назад

      Yeah have the same problem

  • @HUNTER69169
    @HUNTER69169 Месяц назад

    Great video thanks Bra!

  • @VinoRatRodbuilds
    @VinoRatRodbuilds Месяц назад

    Looks like a good upgrade.

    • @KoolFredsGarage
      @KoolFredsGarage Месяц назад

      So far they are a good upgrade. The car is done now. I’ll have more footage in upcoming vidoes.

  • @udeserveitenterprise1166
    @udeserveitenterprise1166 Месяц назад

    ❤ amazing video very informative. We are tuned into the series. This is amazing. Keep it coming.

  • @SaintMurdoc
    @SaintMurdoc Месяц назад

    Good Vid/Tutorial! Doing mine now. Quoted price was around $800 from shop. Doing mine for $320 inculding belt, thermostat, pump, and flush

    • @KoolFredsGarage
      @KoolFredsGarage Месяц назад

      Thanks! It’s always good to save some money and do it yourself.

  • @PrimeG2
    @PrimeG2 2 месяца назад

    Looking to replace my clutch fan with a set of dual electric fans. How does the set you have work? I have the same exact radiator. Do you mind linking me to those and the shroud. Thanks in advance and great video!

    • @KoolFredsGarage
      @KoolFredsGarage 2 месяца назад

      Thanks! The fans are from monster cooling on eBay a duel 12” w/shroud. We added them to a newly replaced stock style radiator. They cool well. If you are using a/c I’d recommend spal fans.

    • @KoolFredsGarage
      @KoolFredsGarage 2 месяца назад

      The fan controller is from the autocool guy.

    • @PrimeG2
      @PrimeG2 2 месяца назад

      @@KoolFredsGarage Ok, thanks! Right now with the clutch fan, the a/c gets down to 40° and the temp hangs at around 195°-200°. So the spal fans cool better? I definitely want to go more modern and get rid of the old faithful, hoping I could gain just a bit more HP. I’ll check those out.

    • @KoolFredsGarage
      @KoolFredsGarage 2 месяца назад

      @@PrimeG2 That’s not bad numbers with the stock set up though.

  • @udeserveitenterprise1166
    @udeserveitenterprise1166 2 месяца назад

    ❤❤

  • @masai711
    @masai711 2 месяца назад

    What was your total job time on this?

  • @KAKNOWN_
    @KAKNOWN_ 3 месяца назад

    This so cool

  • @VinoRatRodbuilds
    @VinoRatRodbuilds 3 месяца назад

    Yep it can get expensive run a pull set.

  • @VinoRatRodbuilds
    @VinoRatRodbuilds 3 месяца назад

    Awesome video glad 2 have seen it. 👍

  • @VinoRatRodbuilds
    @VinoRatRodbuilds 3 месяца назад

    Im building a 383 with a tunnel ram with EFI .

  • @VinoRatRodbuilds
    @VinoRatRodbuilds 3 месяца назад

    UR video run by today, I'm going to be running AFR heads. I need to buy springs and rockers still are you happy with what UR running?

  • @KAKNOWN_
    @KAKNOWN_ 3 месяца назад

    🔥🔥

  • @KAKNOWN_
    @KAKNOWN_ 3 месяца назад

    Living the content we need More

  • @KAKNOWN_
    @KAKNOWN_ 3 месяца назад

    Nice

  • @SummitRacing
    @SummitRacing 4 месяца назад

    Great video! We appreciate your business. Great hat!

    • @KoolFredsGarage
      @KoolFredsGarage 3 месяца назад

      Thanks! I’ve always been a fan of summit. I like the going to your store here in GA. It’s like a candy store every time I come in there.

  • @shiningstaer
    @shiningstaer 4 месяца назад

    Better sound?

  • @shiningstaer
    @shiningstaer 4 месяца назад

    Way better than stock alpine?

    • @KoolFredsGarage
      @KoolFredsGarage 4 месяца назад

      These are more clearer and do sound better if u want to enhance the sound.

  • @yotamonster
    @yotamonster 4 месяца назад

    How is this fix holding up?

  • @332ARA
    @332ARA 5 месяцев назад

    The you use the A/C terminal? how did you wire it?

    • @KoolFredsGarage
      @KoolFredsGarage 5 месяцев назад

      This particular car was not running a/c. For info on this controller and instructions u can ck out www.autocoolguy.com

  • @elefantdude
    @elefantdude 5 месяцев назад

    Hey Kool Fred! Thanks for making and sharing your video of how to install a VIOFO PRO A229 2 Channel Dash Camera! I just purchased one and I am expecting tomorrow :-) I've been doing a LOT of research on which one to get and I found a great deal on eBay for the A229 I picked up. I got it for $137!!! Anyways, I am looking into getting a hardwire kit to install so I can take advantage of the Park Mode for security and after hour recording. I found this video on what someone else did: ruclips.net/video/9BcSQ9Fbf7o/видео.htmlsi=3VXYFZzT7Rf1XczP I also might use the option of getting the VIOFO HK4 Hardwire kit and splicing it to a IROAD OBD2 Cable so I can just plug it into the OBD port underneath the steering wheel. As you know, you cannot go through the firewall to tap into the fuse box :-( Here is a good video on the OBD connector option: ruclips.net/video/mRaR2my1aBc/видео.htmlsi=4rGkZJdKLy6-RXNd Hope you were able to get your hardwire option working the way you wanted to!

    • @KoolFredsGarage
      @KoolFredsGarage 5 месяцев назад

      Thanks for the info and thanks for sharing these videos with me. Honestly I have not had time to install the park kit be cause i have not researched a safe place to get the fused ignition power from. This is an Awesome dash cam have had it for a year now.ive been using the cigarette power outlet. Ill ck out those video's. i've already caught 2 accidents of of other vehicles its definitely good insurance to have.

    • @elefantdude
      @elefantdude 5 месяцев назад

      @KoolFredsGarage - awesome! Can't wait to get mine installed. I'm thinking about getting the Internal IR Camera for mine too..

  • @ronedwards6478
    @ronedwards6478 5 месяцев назад

    How much would your shop charge for this work ?

    • @KoolFredsGarage
      @KoolFredsGarage 5 месяцев назад

      I Service BMW vehicles. however this is my personal pickup truck and i took the door panel off to see if I could do something to fix this myself. and I was able to come up with a quick solution. I'm not actually sure the fix at the ram dealership or if they will just try to sell u a door panel i would say 1hr to 1.5hrs of labor is fair.

  • @udeserveitenterprise1166
    @udeserveitenterprise1166 5 месяцев назад

    Hott

  • @chrisholmes2888
    @chrisholmes2888 5 месяцев назад

    Do ur truck has the limited slip rear?

    • @KoolFredsGarage
      @KoolFredsGarage 5 месяцев назад

      Yes Sir. Limited slip W/ 3.92 Gear ratio

  • @robertpage4833
    @robertpage4833 5 месяцев назад

    Great video bro

  • @udeserveitenterprise1166
    @udeserveitenterprise1166 5 месяцев назад

    🔥🔥🔥

  • @udeserveitenterprise1166
    @udeserveitenterprise1166 5 месяцев назад

    🔥

  • @udeserveitenterprise1166
    @udeserveitenterprise1166 5 месяцев назад

    Nice ❤❤

  • @udeserveitenterprise1166
    @udeserveitenterprise1166 5 месяцев назад

    Nice❤

  • @mauricedade1347
    @mauricedade1347 5 месяцев назад

    Nice set up Iam building a 406 in a donk I love small block

  • @udeserveitenterprise1166
    @udeserveitenterprise1166 5 месяцев назад

    Nice

  • @clintzieandromeda6216
    @clintzieandromeda6216 6 месяцев назад

    That's pretty impressive. Hope I'd get one of my own so I can install more games.

  • @bossman6449
    @bossman6449 6 месяцев назад

    Mann I can use your help with my car. I’m in the Atlanta area, 20 West

    • @KoolFredsGarage
      @KoolFredsGarage 5 месяцев назад

      at the moment i can't take on any extra projects.

    • @bossman6449
      @bossman6449 5 месяцев назад

      @@KoolFredsGarage I gotcha thx