- Видео 11
- Просмотров 61 619
HTC
Добавлен 8 апр 2016
HTC is Located in Scarborough Ontario Canada.
LED Headlight Bulb Comparison Test Sep 2023
All test done from same 12v power source on Luminous Flux Meter TES-133
All bulbs are single filament. All bulbs are H11 except TorchBeam is 9006
Bulbs used are
Fahren
Sealight
Torch Beam
Electronlumen
Philips
Hot-i.org
All bulbs are single filament. All bulbs are H11 except TorchBeam is 9006
Bulbs used are
Fahren
Sealight
Torch Beam
Electronlumen
Philips
Hot-i.org
Просмотров: 103
Видео
F30 LCI CLIMATE CONTROL RETRO FIT F32 Pre LCI DIY
Просмотров 16 тыс.2 года назад
Pre LCI to LCI white LCD climate control upgrade to F3x to F8x 3 series. Correction - I transfer the board as well. BMW LCI Climate control part number 6411 9363546
Lexus Rx350 LED headlight replacement conversion D4s LED conversion Lexus LED conversion
Просмотров 17 тыс.2 года назад
Electronlumen D4s D4r Direct plug and play kit for all D4s equipped Toyota, Subaru and Lexus cars. More LEDs conversion kits available at store www.amazon.ca/ELECTRONLUMEN-Headlight-Bulbs-7600Lm-Bright/dp/B09H5DTP11/ref=sr_1_38?crid=3BAQD2R5H3KP2&keywords=electronlumen+d1s+led+conversion+kit&qid=1642273044&sprefix=electronlumen,aps,155&sr=8-38&th=1
Windshield Snow Cover - Remove Snow and Ice
Просмотров 462 года назад
Easy install and remove snow cover for your windshield, no more scrapping in cold mornings.
LED D1S D1R. F30 BMW LED install D1s conversion kit Electronlumen
Просмотров 23 тыс.2 года назад
LED conversion on BMW F30 F31 328, 320i, 335, F80 f82 m3 m4. This is complete plug and play kit for all car with D1s bulbs Electronlumen HID to LED conversion Direct connect to OEM ballast. www.amazon.ca/ELECTRONLUMEN-Headlight-Bulbs-7600Lm-Bright/dp/B09H5DCL6D/ref=sr_1_10?keywords=electronlumen&qid=1640841512&sr=8-10&th=1
ELECTRON LUMEN LED SPECTRUM CALIBRATION LAB TEST
Просмотров 392 года назад
LED HEADLIGHT bulbs by Electron lumen are all developed with perfect spectrum kelvin temperature. 2800L 3000K 5500k 6000k 6300k 8300K. All ELT series LED bulbs are equipped with CSP LED beads on copper base boards with it own unique design based on the model line for maximum efficiency at it's output level. 2800K and 6000K switchback LED H8 bulb used on A3 and 6000K H7 used on driving footage.
ELECTRONLUMEN LED vibration and transit tests
Просмотров 192 года назад
Vibration lab test to ensure the beads on LED and other components are tight and rattle free. Transit boxing test to ensure all products arrived to customer with no DOA or shipping damage
Electronlumen LED EL Series Headlights
Просмотров 212 года назад
Radio frequency interference test to ensure the electronic fan does not create any interference to the radio. Beam pattern focus alignment to ensure all outputs are being directed to the factory housing design. Eletronlumen EL series LED goes through the same process for during development process. WATASUMI, TSUKUYOMI, and AMATERASU top of the line LED bulbs
LED Strip for 2018 Toyota RAV4 7443 DIY
Просмотров 4,6 тыс.2 года назад
Chasing LED Intro and sequential turn signal wired to 7443 male plug plug and play for 2018 RAV4. All available at HTC Scarborough
Which fuse name did you use??? I try Acc, DRL, not working on mine
Do you have to code and sync up with the car vin after you change the climate control panel?
How does something like this work with bmw high beam assistant and light steering feature?
Great video thanks for this
Music is very annoying.
It only works in cars manufactured after 2014. They have the IHKA3 module by default. Before 2014 they have IHKA...
6000k. LED ？
I tried to do this and the LCI lcd doesn't work correctly on the pre LCI board
Hi what is the orange sheet p/n if my cluster led all other buttons have been changed to white LEDs surely I can just get a white plastic sheet instead of orange, If so what is the part number of that sheet?
What have you done now? Because I‘m doing the same
hello, I understood that you changed only the part of the screen without coding? but how did you change the colors to white and red
Did you install the headlight dust cover or does it stay open?
Yes we put dust cap back on.
@@htc2187 And there is no interference? I mean there is enough space in there for the fan and radiator of the led light?
@@gohopoho3903 it's fine no issues
I tried to install this on my es300h but the cable doesn’t fit
Do you have auto leveling? If not you should able to stuff the plugs in under the projector inside the housing
How is it after 1 year ?is it still working ? I read some news in car forum that some owner had only less then 1 year and it’s not working…while some other owners complain these led are making the car ballast to have a burnt short circuit and finally getting to change the ballast and back to original xenon bulb , thus this is making me still stay with xenon bulb ; anyway that’s my sharing , please share your experience as well ,thanks
from the comments i dont see anyone who did it successfully, anyone did it? i would love to get that lci look.
Will this still work if I deleted my ballast
Do you have any malfunction codes since it’s LED
No it's full canbus
So I can buy a 2018 oem one to put in my 2015 Bmw ?
Yes. I fitted an LCI one to my 2014 F36. Then just a quick code with Bimmercode and let it calibrate itself and it works perfectly.
@@scotthanks755 what code in bimmercode?
mine I bought with ballast just like yours mine is an f10 when two minutes go by it turns off then i have to turn off the selector and turn it on again to be able to work again. then it turns off again, what could it be?
Both shut off or just one? Was it electronlumen branded or other brand?
Confirm if you have the right size d1s not d3s
yes the lamp I bought is different from the brand of yours, but it is d1s with ballast in the harness.
@@FarleyRibeiro I suggest you try purchase another set. If you got one that has a external in line driver they are not that great. Try get one I am using or newer gen with all in one no inline driver
i'll try it, if it's bad i'll go back to hid bulb but i think i will like the LED better
so how did u like it? kinda feeling like the hid is brighter and more consistent on the edges
Speaking of PRE-LCI to LCI... I want to ADD a LCI ambient light to the AC/Radio cover trim, but.... I don't have the LCI connector. Can you assist give me some directions? 2016 BMW 428i F33
Why does the beam pattern suck while your driving seems that 6000K HID bulbs look better…
You are probably seeing the lights on the ground, thats the fog light which is reflector
What lip is that?
There’s a LOT of glare from that LED
No it's doesn't it's literally in a projector lense that has a cutoff
Nice explanation. Just one question that makes me very curious. Is it possible to put LED bulbs with more watts in a 35w standard ballasts without any kind of problems?
@@WhatD4FCK Watts are the voltage x amperage and has nothing to do about the light output (which btw is lumen). And yes, if LED bulb is rated as 35W, it will draw 2,9A at 12V = 35W. In one hour it has consumed 35Wh. HID bulb will have different voltage and amperage readings, but if its rated 35W, then it is 35W...
i have a lci f82, how do I turn on the white climate control permanently? thx for help
You should able to do that if you max out the dimmer
Пизда блокам розжига, расчитанным на 45W🤣🤦
I been wanting to do this for months on a 2017 F15 X5
2:55 how LED bulb in xenon projector is blinding other drivers...
The camera angle is about 5 inch off the ground. The OEM project will have a clean cut off to stop glares.
What about the cable management of the led light?
Right that was the part I was hoping to see.
They just tuck in the housing it's light and small
Nice
I got new headlights that I’m trying to install on my 2007 bmw 328i and the high beam it needs is a h7 dsi which I can’t seem to find anywhere if it even exists
They are just standard H7. Any H7 led with canbus should work fine
Top video
Are there problems with the adaptive high beams?
Sorry for the late reply. The auto leveling works fine.
Nice 👍
Nice, thanks for sharing, I'll give it a try right after I'll find a unit in my region. But what intrigues me is the background noise from 3:54 and 3:55. Sound like you were not alone in the car :D
Hallo was hast genau getauscht Schöne Grüße
Hi were there any coding involved with the lci unit into pre lci?
no coding required. all pnp
@@htc2187 what year was the car you did it on? Mine is a march 2014 F30 it powered up but unfortunately didn't work properly. I don't suppose you have a part number of the climate unit you used? I may have the wrong one.
@@dansaville5 are you using your old board or new board? Try use your old board and only swap the display pieces over.
@@htc2187 mine is a pre lci I have an lci unit tried swapping just the screen over but it didn't work nothing lit up
@@dansaville5 I have a pre LCI vehicle using a LCI HVAC. Are you sure the donor unit was in working condition?
NICE VIDEO. THANKS FOR YOUR PROFESSIONAL INTRODUCTION
D4s is a very good upgrade, they are D4 is a mercury free bulb. You can check us out @ hot-i.org
Have you had any problems with them
No issues so far. Perfect match for your oem DRLs
Where to buy it ? Thanks
I want to do this for my 07 gs350. No matter what d4s I’ve installed it’s always sucked. Am I able to use the oem d4s ballast? And how can I get these in the US?
0:27 I gasped when he grabbed right onto the LED chip LOL
👍
👍👍
So Cool 😎 😍