Видео

Daytona Jeep Beach 2022

In this video, I replace the turn signal flasher to stop the turn signal hyper flash on LED lights. Tridon EP26 Flasher: www.amazon.com/dp/B000JZ79NC?ref=ppx_pop_mob_ap_share

In this video, I replace the spark plugs, plug wires, distributor cap and rotor, fuel injectors, and added heat shields. The heat shields resolved my vapor lock and heat soak issues starting the engine when hot. I gained more acceleration and power while shifting from 1st, 2nd, 3rd gears and now able to reach highway speeds much faster. Highly recommend performing this full tune up on your Jeep...

In this video, I use a degreaser to clean the engine bay on my Jeep TJ 4.0L with 205k miles.

In this video, I install 3/4 inch LED turn signal/marker lights on my metalcloak fenders. I used 16/14 gauge bullet connectors to wire it up. I used 4 LED lights with 3 wire connectors. The outer stock lights are 2 wire sockets, but I still managed to get them to multi function as marker lights and turn signals. My only hiccup is that the lights must be on in order for the turn signals to flash...

In this video, I plug up a few leftover holes in the firewall that were leaking exhaust fumes to the inside cab of the Jeep. Parts listed below. Shifter boot bezel: Omix-Ada 18886.94 Manual Transmission Shifter Bezel for 1984-2004 Jeep Wrangler and Cherokee Models www.amazon.com/dp/B0093E8SRG/ref=cm_sw_r_cp_api_i_Q1HQXHPE0TDK32MCZWWZ?_encoding=UTF8&psc=1 Oval plug: Flyshop 1-1/2" x 3" (37 x 75m...

In this video, I show how you can rotate your tires at home with just a few simple tools. Safety first!

I’m this video, I use 1 quart of Lucas Oil stabilizer during the oil change to reduce the engine ticks and knocks from this high mileage motor with 190,000 miles. No leaks, just a loud lifter tick and heavy engine knock. The Lucas really made a difference and the car is running a lot smoother with better oil pressure. Don’t be afraid to give it a try, it really works!

Took the 2013 SVT Raptor to Thursday night Test n’ Tune at Bradenton Motorsports Park. This was my first time ever drag racing on an official 1/4 mile race track and it was a blast. I have a lot of room for improvement to reach a faster time and top speed. I’m currently running Roush catback exhaust, Roush cold air intake, and a pedal commander. For the races, I set the pedal commander all the ...

This is a 35° cold start of a 2013 Ford Raptor with a Roush catback exhaust.

In this video, I install two front tow hooks and one rear hook. The front hooks are $15 each on Amazon. The rear hook was bought online from another RUclips page “Kyle SVT” from his rear bumper video. All grade 8 hardware from Ace. Front bolts thread 1/2 x 13 Rear bolts thread 7/16 x 14

Jeep Wrangler TJ - Safari Matrix Doors Install

Jeep Wrangler TJ - Speedometer fix on NP231 Transfer case

Brake lights won’t turn off!! BRAKE SWITCH reset on Jeep Wrangler TJ

Jeep Wrangler TJ- How to fix a locked seatbelt

Duplicolor Vinyl and Fabric Spray Paint on Jeep TJ roll bar padding

Jeep Wrangler TJ - New Tailgate Install

Jeep Wrangler TJ - LED Smoked Headlights Install

Jeep Wrangler TJ - Aluminum Hood Latch Install

Jeep Wrangler TJ - Spraying Tintable Blue Raptor Liner (Gunmetal Pearl), Ep.13

Jeep Wrangler TJ - Spraying Black Raptor Liner on Floorboards, Ep.12

Jeep Wrangler TJ - Frame & Tub Swap Timelapse, Ep.11

Jeep Wangler TJ - Sanding floorboards for Raptor Liner, Ep.10

Gen1 Ford Raptor - Roush Cold Air Intake Filter Cleaning

Gen1 Ford Raptor - Oil Change

RAM TRX vs GEN 1 RAPTOR - Side by side photos