![The Humble Paint Sprayer](/img/default-banner.jpg)
- Видео 93
- Просмотров 154 006
The Humble Paint Sprayer
Великобритания
Добавлен 7 окт 2023
The Humble Paint Sprayer is a channel dedicated to Car Body Repairs and Car Spraying, with videos of all aspects of car refinishing and body repairs with step by step processes using the right tools, equipment and materials to achieve perfect results
Uploads Every Wednesdays & Saturdays @ 8pm
ruclips.net/channel/UC5a2k8nofCPRnYJSy3bSuWQ
Uploads Every Wednesdays & Saturdays @ 8pm
ruclips.net/channel/UC5a2k8nofCPRnYJSy3bSuWQ
HOW TO FIX FLAKING PAINT | ELIMINATE ADHESION PROBLEMS | PORSCHE BOXSTER | CHEAP SATA SPRAY GUN
Welcome to my channel & my next video, thank you for taking time to look at my videos, i hope you enjoy them
In this video we have a Porsche Boxster in for the front bumper to be resprayed due to poor adhesion and flaking paint
I talk through the preparation stages and show all the painting processes and applications to fix this issue from bare plastic to clear coat
00:00 intro
06:06 Pre cleaning
08:34 Mipa 2K 4+1 high build primer application
16:45 Satajet 1500B spray gun review
23:28 Mipa 4+1 wet on wet primer application
25:23 Colour mixing
26:38 Mipa WBC water base coat application
30:57 Mipa CX2 2k high solid clear coat application
35:11 End results
35:38 Outro
The paint used on this vehicle...
In this video we have a Porsche Boxster in for the front bumper to be resprayed due to poor adhesion and flaking paint
I talk through the preparation stages and show all the painting processes and applications to fix this issue from bare plastic to clear coat
00:00 intro
06:06 Pre cleaning
08:34 Mipa 2K 4+1 high build primer application
16:45 Satajet 1500B spray gun review
23:28 Mipa 4+1 wet on wet primer application
25:23 Colour mixing
26:38 Mipa WBC water base coat application
30:57 Mipa CX2 2k high solid clear coat application
35:11 End results
35:38 Outro
The paint used on this vehicle...
Просмотров: 732
Видео
I BOUGHT A CHEAP LOW MILEAGE BMW 1 SERIES FROM AUCTION | PART 3 | FINALLY FINISHED | END RESULTS
Просмотров 1,3 тыс.14 часов назад
Welcome to my channel & my next video, thank you for taking time to look at my videos, i hope you enjoy them In this video we brought a lovely cheap low milage BMW 1 Series Convertible from auction with some work to do In this video i go through the final cleaning stages on the interior and body work and i tackle re painting the drivers seat bolster and give you a look at the final results TAKE...
Car Painting | BMW X6 | Repair | Prep | Spraying | SprayGuns Sata X5500 1.2 i & Sata X5500 1.3 CC
Просмотров 1,5 тыс.19 часов назад
Welcome to my channel & my next video, thank you for taking time to look at my videos, i hope you enjoy them In this video we have a BMW X6 in for small dents and paint repairs to the offside doors In this video i show the paint preparation, masking, and spraying on this vehicle 00:00 Intro 02:27 Cleaning 03:02 Dent Repairs 04:40 Stripping 05:53 Filler Repairs 07:23 Paint Preparation 09:10 Mask...
JUST ME IN MY TINY SPRAY BOOTH PAINTING ANOTHER JOB | NO BULLS**T | JUST PAINT SPRAYING
Просмотров 2,1 тыс.21 день назад
Welcome to my channel & my next video, thank you for taking time to look at my videos, i hope you enjoy them In this video we have a 2016 Aston Martin Vantage in for a repair and paint to the nearside front wing and front bumper This video show all the paint stages from start to finish The paint used on this vehicle is Mipa 4 1 High Build Primer Mipa WBC Waterbase Base Coat Mipa CC9 Clear Coat ...
PROFESSIONAL PAINT SPRAYING GUIDE | 6 HOUR PAINT JOB IN 25 MINUTES | PART 2 | PREP TO PAINT
Просмотров 1,9 тыс.21 день назад
Welcome to my channel & my next video, thank you for taking time to look at my videos, i hope you enjoy them In this video we have a BMW 3 series touring in for repair and paint to the drivers front wing, door and rear bumper In this second part i go through the paint preparation where i talk about all the sanding procedures and grades of sand paper, the masking and water base coat and clear co...
HOW TO REPAIR AND PAINT A FRONT WING | PANEL TO PAINT | PART 1 THE REPAIR
Просмотров 1,2 тыс.28 дней назад
Welcome to my channel & my next video, thank you for taking time to look at my videos, i hope you enjoy them In this video we have a BMW 3 series touring in for repair and paint to the drivers front wing, door and rear bumper In this first part i go through the repair processes from the panel beating, filler work up to the primer stage Look out for part 2 where i show the paint preparation, mas...
HOW TO PAINT SPRAY | TUTORIAL | RARE FORD TRANSIT SPORT VAN | PART 2 THE PAINTING STAGE
Просмотров 2 тыс.Месяц назад
Welcome to my channel & my next video, thank you for taking time to look at my videos, i hope you enjoy them In this video we have a very rare Ford Transit Sport Van in for a repair to the side loading door In the video i talk you through all of the paint application stages and show you how i apply water base coat and 2k high solid clear coat Look out for Part 1 "HOW TO REPAIR DENTS" ruclips.ne...
HOW TO REPAIR DENTS | TIME LAPSE TUTORIAL | RARE FORD TRANSIT SPORT VAN | PART 1 THE REPAIR STAGE
Просмотров 1,6 тыс.Месяц назад
Welcome to my channel & my next video, thank you for taking time to look at my videos, i hope you enjoy them In this video we have a very rare Ford Transit Sport Van in for a repair to the side loading door In the video i talk you through all of the panel work and filler work stages up to the primer stage to get this dent repaired Look out for Part 2 " The Painting Stage" 00:00 Intro 02:53 Pull...
CAR PAINT SPRAYING | FLOW COATING OR FLAT & POLISHING WHICH IS EASIER ???
Просмотров 988Месяц назад
Welcome to my channel & my next video, thank you for taking time to look at my videos, i hope you enjoy them In this video we have a highly tuned Audi RS3 in for some paint work after some damage that accrued from a wrap removal In this video i show the painting stage and talk about wether its easier to flow coat a panel or to flat and polish it 00:00 intro 07:16 Water Base Coat Application Mip...
Renault Clio Williams Restoration PROGRESS UPDATE!!!
Просмотров 1,5 тыс.Месяц назад
Welcome to my channel & my next video, thank you for taking time to look at my videos, i hope you enjoy them In this video I show you a project car I've had for over 10 years, Renault Clio Williams 3 (Willy) This is the third video of many (hopefully) of fully restoring this car back to its original condition In part 1 give you some back ground on this car and my ownership and the work I've don...
Professional Spray Painting, Spraying Water Base Coat and 2K Clear Coat
Просмотров 1,5 тыс.Месяц назад
Welcome to my channel & my next video, thank you for taking time to look at my videos, i hope you enjoy them The paint used on this vehicle is Mipa WBC Waterbase Base Coat Mipa CX2 Clear Coat Sprayguns used Basecoat Satajet 5500x Future HVLP 1.2 i set up Clear Coat Satajet 5500x 1.3 CC set up Paint Pots Sata RPS Hope you enjoy If you enjoyed this video Please Like, Share and Subscribe Many Than...
Painting a DAMAGED Toyota GR Yaris, 3rd Time Lucky 👌 !!!
Просмотров 1,7 тыс.Месяц назад
Welcome to my channel & my next video, thank you for taking time to look at my videos, i hope you enjoy them In this video we have a Toyota GR Yaris in for a repair to the rear quarter panel This Video i show every step and process from the repair stage to the final clear coat stage 00:00 Intro 05:21 Panel Work 06:59 Filler Work 12:39 Paint Preparation 15:00 2K High Build Primer 17:33 Masking S...
I Bought a Cheap Low Mileage Car from Auction..PT 2....POLISHING A TURD 💩💩💩
Просмотров 2,4 тыс.Месяц назад
Welcome to my channel & my next video, thank you for taking time to look at my videos, i hope you enjoy them In this video we brought a lovely cheap low milage BMW 1 Series Convertible from auction with some work to do In this video i go through what issues there are with it, the things that have been fixed and i start on the cleaning and polishing processes I show all the polishing stages and ...
Spraying 2k Direct Gloss on an old Volkswagen Golf GTi with an old Spray Gun
Просмотров 2,4 тыс.2 месяца назад
Welcome to my channel & my next video, thank you for taking the time to look at my videos, i hope you enjoy them In this video we have a Volkswagen Golf GTi in for the bonnet, front and rear bumpers to be resprayed This Video show the paint application of 2K high solid direct gloss The paint used on this vehicle is Mipa 4 1 High Build Primer Mipa OC HS 2K Direct Gloss Sprayguns used High Build ...
I Bought a Cheap Low Mileage Car from Auction, What Could go Wrong🤦♂️BMW 1 Series Convertible PT 1
Просмотров 2,3 тыс.2 месяца назад
I Bought a Cheap Low Mileage Car from Auction, What Could go Wrong🤦♂️BMW 1 Series Convertible PT 1
How to Spray 3 Stage Pearl & Avoid Problems BMW Mineral White
Просмотров 9522 месяца назад
How to Spray 3 Stage Pearl & Avoid Problems BMW Mineral White
Paint Spraying a New Panel, Reminiscing, some Waffle and a bit of Moaning
Просмотров 1,4 тыс.2 месяца назад
Paint Spraying a New Panel, Reminiscing, some Waffle and a bit of Moaning
Spray Painting Porsche 718 Boxster S Front Bumper, Every Step Start to Finish in Detail
Просмотров 1 тыс.2 месяца назад
Spray Painting Porsche 718 Boxster S Front Bumper, Every Step Start to Finish in Detail
Spray Painting 2k High Solid Direct Gloss Audi A7 Front Bumper
Просмотров 2 тыс.2 месяца назад
Spray Painting 2k High Solid Direct Gloss Audi A7 Front Bumper
Spray Painting a Brand New Porsche Cayenne Hybrid, Probably the Most Detailed Video on YouTube 😉😉
Просмотров 1,8 тыс.2 месяца назад
Spray Painting a Brand New Porsche Cayenne Hybrid, Probably the Most Detailed Video on RUclips 😉😉
How to Paint a Car , Spraying Water Base Coat & 2K Clear Coat
Просмотров 1,9 тыс.2 месяца назад
How to Paint a Car , Spraying Water Base Coat & 2K Clear Coat
Professional Spray Painting Spraying Matt Clear Coat, Different Levels of Gloss
Просмотров 1,3 тыс.3 месяца назад
Professional Spray Painting Spraying Matt Clear Coat, Different Levels of Gloss
Spraying Water Base Coat & Clear Coat BMW 3 Series Front Bumper
Просмотров 9163 месяца назад
Spraying Water Base Coat & Clear Coat BMW 3 Series Front Bumper
Spraying a Porsche Boxster 718 GTS Racing Yellow Front Bumper
Просмотров 1,5 тыс.3 месяца назад
Spraying a Porsche Boxster 718 GTS Racing Yellow Front Bumper
The Best Beginners Guide to SPRAY Your Car at HOME with AEROSOL CANS, NO EQUIPMENT NEEDED !! PART 2
Просмотров 1,9 тыс.3 месяца назад
The Best Beginners Guide to SPRAY Your Car at HOME with AEROSOL CANS, NO EQUIPMENT NEEDED !! PART 2
The Best Beginners Guide to SPRAY Your Car at HOME with AEROSOL CANS, NO EQUIPMENT NEEDED !! PART 1
Просмотров 2,3 тыс.3 месяца назад
The Best Beginners Guide to SPRAY Your Car at HOME with AEROSOL CANS, NO EQUIPMENT NEEDED !! PART 1
Professional Paint Spraying, Blending Water Base Coat, Mini Cooper Door
Просмотров 1,6 тыс.3 месяца назад
Professional Paint Spraying, Blending Water Base Coat, Mini Cooper Door
Professional Paint Spraying Mercedes E Class Convertible
Просмотров 2,1 тыс.3 месяца назад
Professional Paint Spraying Mercedes E Class Convertible
Spraying a Porsche Cayenne S Lava Orange, I took the colour gamble and it didn't pay off 🤦♂️
Просмотров 2,3 тыс.3 месяца назад
Spraying a Porsche Cayenne S Lava Orange, I took the colour gamble and it didn't pay off 🤦♂️
Great job, don't mind the music at the end but prefer the sound of the gun or you talking during the painting.
Fair comment on cheaper guns mate.
I had a yard/workshop on an estate, we built mine as the others were just carp, nearly all the shops used cellulose. Some came around to look at the gun finish Gipfast 60 lol Back then I painted salvage cars for would hang the parts that bolted on and paint them off I had a 75k btu gas space heater so would get the shop hot turn it off put the extractor on tack them off and "go for it" That bit of heat and a 43 cap moving like a mad man worked a treat. Air fed mask and 3m paint suit I looked like a space man compared to the others lol
That scenario sounds very similar 👍
it looked pretty perfect to me bud super job 👌 the colour in the booth reminded me of my old BMW m sport think it was called Monaco blue or something like that but on the car it looked totally different lol nice colour though . Shame losing the footage that must be a real bummer but can’t be helped dude it happens you can only do what you can do 👍
Cheers man, yeah i know, nice colour i like blues, it is had a lot of footage its a shame
Whats your opinion on solvent swell with panel wipe on bare plastic? I always use standox plastic cleaner, wipe on and leave it situation then straight in with plastic primer, its always served me well but keen to save costs where I can of course for me and the customer
I clean it with water degreaser then blow it out til dry the silicon remover and blow it out again til dry
Great to see you back Jason, excellent workmanship, as always❤.
I always comment on your channel jay I would like to see a couple of things please how to blend base coat paint and how to used them paint scales ⚖️ did you go somewhere nice jay
Great job, I notice you always set the pressure at the wall to allow maximum free flowing air into the gun, it’s something I’ve just started to do especially with my Satas if not I get a real dry looking clear finish and split fan patterns otherwise set to 7 - 8 bar, is it something you’ve always done? Keep up the good work
Cheers, yeah ive pretty much always set at the regulator it definitely make a difference
Masterpiece💯💯
Hi Jason, great job as always mate, and thanks for the Shout out !! Just letting everyone else know, the job Jason done for me has come out Absolutely Stunning, and I’m over the moon with it. It was well worth travelling from Northamptonshire, I don’t believe I would have got better work anywhere else. Maybe there’s some computer Boffins that watch the channel that may have a solution to getting the footage back ? Cheers, Vince.
Thanks Vince 👍
What compressor set up do you run
Fiac tandem Twin 4hp single phase piston compressor with a kaeser dryer
Another nice one, interesting job. Thanks
Excelent channel!! which will work better for solvent basecoat?? sata 1500rp or hvlp?
HVLP for base coat 👍
👍🏻
👍👍👍
You're not letting that glue get hot enough mate. Took me ages to figure that out. needs to be really hot and runny and left on the panel for 35 seconds at least before pulling.
Thanks mate really appreciate that, do you know what’s the best glue to buy, seen different colours but not sure what the grades are if any or if there’s different glues for different purposes
@@TheHumblePaintSprayer333 i use the red stuff, is a good all rounder, they'll all work for fairly shallow dents, the trick is to degrease the dent and get the glue as hot as you can, leave the glue gun on for about 15 minutes to let that nozzle really heat up, i guarantee once you try really hot glue with a decent cool down time, you'll pulling dents like carrots!
@@JohnSmith-it6hj thank you mate i didnt even think of the glue temp, i might get a better quality glue gun as mine seams well cheap 👍
Another great bit of work! Be careful with effing and jeffing as YT don't like that mate! (although justifiable regarding that effing fly!) 🤣🤣🤣🤣
Thanks, will do!
great job, what were you spraying on the car after you finished washing?
👍 it’s called rinse, spray it on a wet car leave it for a couple of minutes the rinse off, it leaves a nice glossy film on the car and reduces water spots It’s a product from a friend of mine who’s a detailer I use most of his stuff it really good Here’s a link to all his products www.pro-detailukshop.com/
@@TheHumblePaintSprayer333 many thanks
Nice work with those dollies! 👍👍
👍👍👍
Enjoyed watching 👀 this vlog. Looks the dogs 🐶 twitcher. Go on let your sister have it, you ain’t exactly strapped for cash 💰😂😂😂👍
Nice one cheers mate 👍
Great job. Fascinating insight into the processes you used to try to make the finish as OEM as possible. One question, where is your business? Can’t find your contact details anywhere online!!!
Cheers were in Swindon
Hi Jason, you did a good job on livening up the BM mate it looks so much better than when you first got the car, it just shows what you can do to a car without spending a lot of money at home as all you need is time and s bit of hard work, it's a shame about the roof but I recon it would cost a small fortune to get it replaced🤔 I have a Merc SLK and the hard top on that car is very nice but it did go wrong a couple of weeks back, the central locking the roof and the alarm started playing up but I found out it's a common fault that the batteries in the alarm start leaking that fries the circuit board I removed the alarm and it cured all the problems 🤷♂😂 If that BMW was mine I would keep it and possibly see about getting the roof replaced👌👍
Many thanks, they can be a bit of a worry the roofs if they start playing up, glad you got yours sorted 👍
Nice Jay, back in the day my salvage cars went to mot after panel/paint work then over to "Mark" as it meant I could get on with putting one on the dozer. Only thing I kept in the work shop was 3m hand glaze as in the 90's the products were awash with silicone so for the 35quid Mark charged my little shop was fisheye free lol Nice channel
Nice, good old hand glaze it was great stuff
Hurry up and sell sell sell. Summer is over . If you sell to a family member, add 5k as it's a lifetime warranty if you sell to family.
Yeah I know, doesn’t matter if I sell it family or not I’m always sorting their cars out anyway 😂
@@TheHumblePaintSprayer333 Same with me. Good luck with your sale.
great video get it gone get the next one 👍👍👍👍👍
Thanks mate 👍 Thats the plan
From one painter to another how do you get involved with buying from bca and where do you advertise them kind regards Ian .ps quite interested in doing a couple my self like yourself it’s just enjoyable to do the transformation, keep up the good work great content always 👍👍👍
You have to register your company and prove stuff like traders policy, company number etc you can register as a private buyer as well i think
When i was selling cars 20 years ago i was known as as Mister perfecfection lol , 5 days on a interior clean was normal for me but i sold every car .
😂 i bet they were mint , I know what you mean its easy to get carried away as if it your own car but thats a good thing i suppose when your doing them yourself and not paying for someone to tidy them up you can make the effort as its only costing your time , when i see other traders cars i think I'm going over the top look at the state of their cars and they manage to sell them
Looks amazing! Just out of interest what wax do you use?
Cheers, for the work cars i use a Autoglym trade wax thats been around for years its good stuff and really easy to use, for my own stuff i usually ceramic coat them with Gtechniq stuff
@@TheHumblePaintSprayer333 many thanks 😊
Great job Jason and Reece. Brilliant turn around, from where it was. Just go’s to show with a bit of graft you can polish £ into cars. Thanks for sharing mate. Cheers Vince.
Thanks Vince 👍
great job, and it looks really nice now its done. is a aftermarket roof an option?
Cheers, I think there might be a aftermarket option I did speak to bmw and you can buy a new canvas it’s not to expensive but it’s a lot of work to change and tbh it’s not that bad, if it was leaking then i would change it
Hi, Just subscibed to your channel, Just wondering how much will you be listing the vehicle for sale?
@@loyalty786 Thank you for your support, it’s up for £5750 if you want to email me on thehumblepaintsprayer@gmail.com if your interested
Looks a great motor Jay excellent job mate
You'll be in the dog house stealing the wife's hair dryer
@@nicholasviney5975 😂I got away with it
Looks good next time try Pears soap in warm water to clean the seats you will be very please with the results 😊😊👌👌
@@jasonabbbott40 I’ve heard of that I will give it a try
I really enjoyed this little series, nice job!. While I do like your painting videos, for me there is something special about seeing a pretty rough example of a nice car, and seeing how it can look after it's transformation. Regardless of the content, I'll carry on watching your videos, as you come across as a very humble ( I know it's in the channel name haha) but also a nice likeable genuine guy. You are getting better in front of the camera in every video and deserve many more subscribers than you have. Keep putting out the content and I'm sure they will come
@@bigusdicus3677 thank you that’s very kind of you really appreciate it, I know you can’t call yourself humble as that means you’re not but I do try every day to keep myself humble and I thank god for everything i have received Have a blessed day 🙏
Wow that car looks really nice now J you turned into a little gem ! Amazing how good that leather paint turned out I was very impressed with that . I wish I still had mine now it was a fun car at the time ..nice job 👍
@@bigsquatchsasfoot1964 thanks mate it’s for sale if your interested 👍
I'm using some mipa OC but with their matting agent for a satin gloss, would you recommend the MS hardener as it levels better and I don't need gloss?
Yes I would use the MS hardener for satin and matt
@@TheHumblePaintSprayer333 how much thinners do you like with the MS?
NICE JOB THERE JAY I TAKE THE FRONT SEATS OUT ME AND GET THE LITTLE HENRY HOVER TOOL OUT AND GIVE IT A GOOD CLEAN MATE I HAVE THAT AUTO GYM SNOW ❄️ FOAM GOOD STUFF I THINK 🤔
Looks really nice , will make a great cheap car. Just noticed it on auto trader 👌🏻
Great job looking forward to the next one 👍
Thanks 👍 Its the last one for this car, check out part 1 & 2 if you haven't seen them thanks for watching
Looks really nice, impressed with the leather product
👍 Me too!
What a lovely job. She looks bloody good.👍👍👍
She came out well 👍 many thanks
Was wondering about this one 😊. Nice work.
Thank you, i know it been a while since the last video
Hi Jason, fantastic result on the blend and the trusty 1.3CC did the business on the clearcoat, I haven't used any glue pulling gear but have a look at the Keco gear mate I've seen quite a few on here like Wayne and Tony using it, their glues are fantastic and one demo I saw they actually moved a car with just a small pad glued to it, it seems like the trick is all in the temps mate if you have the glue and the panel at the right temp then it sticks 10 times better. There are loads of videos on here with people like I mentioned about using them and even demos by the manufactures showing how it's used👌👍
Thank you mate really appreciate the recommendation i will defintly look in to it 👍
a master at work, lovely job ,can't wait for the next one
Thank you very much!
Awesome job!
Thank you! Cheers!
👍🏻
Perhaps when you got a quiet time it might pay to see if there is a PDR course you can take.
Yes i have thought about that it would be worth it i think, i definitely need some training 😂👍
Nice job ! What was the first coat after priming ? Thanks keep them coming ..
Thanks it was the blender coat first
Great job Jason, as always. An invisible blow-in , you never know what you’ll find I suppose until you start prepping it ? Cheers mate, Vince.
Cheers Vince
Jason have you got a Rat in the garage or is it up your backside well it ain’t there anymore. Great video and great job as usual 👍
👀😂Not sure what you mean but .... there's a rat in me kitchen, what am i gonna do 👍