Видео

@@keithrobinson1331 Yeah when these beans came out on the 18th of September we didn't have a load above 11.2 percent but not below 10 percent. Maybe am gonna fix this old girl up yet idk.

Hey, it might be making a comeback! Honestly thinking about fixing it up since it's such a clean machine with a lot of work done to it prior to the fire, all it needs, honestly, is ac compressor, hoses, one wiring harness, throttle cable and replacing the radiator hoses.

@@keithrobinson1331 At least most of our tile lines are still running so can't beat that.

@@keithrobinson1331 Gotta keep her rolling. It so dang dry it ain't even funny for October.

@@GosselinFarmsEdGosselin lol 🤣, you just need to come to Iowa to get the classics. Put a Bluetooth radio in each of your tractors and that solves issues.

@@GosselinFarmsEdGosselin Id have to leave now and in about a week id be out, gotta get duals mounted up lol, plenty of power not enough traction. I can run b2 but that's working it pretty good so stick to b1 at 2000 rpms and it seems to handle it fine there.

@@kolewiebensohn if we ever get the big baler put away, the 3394 would be on the big disc, it's like plowing 👍 Weather is questionable now, but...

@@GosselinFarmsEdGosselin We gots all the classics here in Iowa that's for sure! Cassette player don't work anymore though.

Well I like to use block heater but this thing had to be running due to some issues that arose that particular day that I did not expect so it was needed in short notice. I do prefer to plug it in though when I know it's going to be needed.

I wouldn't have it any other way either! Better out in the country in my opinion.

@@kolewiebensohn moved with my job down by St. Louis in in 99’ … wife didn’t want to go …. Finally convinced her to come down…. And now I can’t get her to leave now that I’m retired! I miss farming community life!

@@Kevscancave Yeah times have changed and sometimes the big cities are nice, I just hate lots of traffic is my big deal really.

@@kolewiebensohn Absolutely! 👍😎👍

24-25ft Caseih 4300, does a good damn job and it will let that 3294 know it's back there when it's wet, but I also run about 4inches deep.

@@kolewiebensohn , your tractor must be 200+ horsepower?

@@tractortalkwithgary1271 Really don't know, I'm figuring around 170-175.

G'day Gary

G'day Murphy! How's things over the pond?

@@kolewiebensohn Cold mate winter is coming fast here

@@Murphyslawfarm Jeez, ain't that funny your gonna get winter and I'm about to summer.

@@kolewiebensohn Yes it is funny plus I live upside down 😂😂

@@Murphyslawfarm lol the land down under, still want to see a kangaroo fighting! That would be awesome to watch.

Got all the tillage done today just gotta plant now.

@@kolewiebensohn nice 👍

G'day buddy

@@Murphyslawfarm g'day mate

Trying too! This little 830 has some guts to er. Wishing I had my 730 around right now so it could do other stuff.

Yeah, Gotta get the cultimulcher out tomorrow and work what I did with the 3294 so I can get some hay in Friday. Having a good radio makes tractor time so much more fun to me, heck most of the songs I heard to today came out when I was a little kid which makes me feel old all the sudden.

@@kolewiebensohn nice 👍 Always love the good ol songs

Junk, can get them but the wiring to that is shot, need to get it replaced someday but it's mainly just a spring and summer tractor now. Have easier starting tractors for any winter work if needed. Should just 504 swap it and be done.

@@kolewiebensohn2 things the 930 would self destruct with a 504 in it, and the the wiring and solenoid to run the preheated wouldn't cost $50. The engine is a precup, just like the 7.3 idi, by design they won't start with out a heater, it's the nature of the fuel cell

@@RJ1999x I know that, we've run 30 series for years. The 504 wouldn't hurt a thing on it really we had one

@@kolewiebensohn If anything a 970 engine would be better the 30 series weren't all that tough. Had them, and 70 and 90 and 2 94.Decent tractors but ..... Lol

@@RJ1999x Idk For what it does a big motor wouldn't hurt. My neighbor is a good ol case mechanic and has a 150 horse 1030 with a 504 he runs on a 24ft field finisher, he out hydraulic steering on it and rigged up hydraulic brakes from a 70 series on it. I like my cases since we've been case forever with a few deeres mainly 20 series.

It was a beautiful day out for sure! Am getting an air ride seat for it lol. Kinda tko'd the factory hydraulic seat base on end rows with the huge bump and broke the seat base frame lol.. So I'm getting a nice air ride seat base like I have wanted for a while now.

@@kolewiebensohn nice 👍 And C-IH has pretty good air ride bases. We put one in the 5288.. the 2294 and 3394 have truck air ride bases in them. But the 5288 it's all self contained.

@@GosselinFarmsEdGosselin Yeah but C-IH is probably very Pricey. K&M makes a lot for a 90 and 94 series cases that are really good.

@@kolewiebensohn good to know!! Thank you Kole!

works great, I gotta do a drive shaft rebuild on it next year and a bearing and maybe a drive pulley for the right side but otherwise it works good. Wish I had a batwing mower though.

I only had to weld a drive shaft together on it and it needs a bearing but I'm done with it for the year.

It was going good, throttle cable is screwed up now and I don't know why or what to do. I've run out of tricks to fix.

@@kolewiebensohn Dang, that sucks for sure!! I bet a new one is pricey 😳

@@Pennies_on_the_dollar 107 bucks I just looked. I hope I don't but oh well

@@kolewiebensohn 😳😳😳

Just wish the wind wasn't blowing 80mph but oh well

@@kolewiebensohn ya, little itchy dust goes a long way..

@@GosselinFarmsEdGosselin yeah dust don't bother me but the stalks are blowing badly...

Yeah I'm just a buffing fool right now trying to make it look good, need to buy more wax.

Yeah lol snow is fun little slick this morning. Yeah if it make it I'll have to find you, idk yet might be working on building our shed.

Yeah I got the part numbers and what's left of the axle parts to run into Napa after school tomorrow.

Thats what I thought too lol just a light tillage idea.

Only annoying thing is they are definitely gear grinders

Fun times Nelson! Love the rake, wish I owned it damn nice for when you come to and end and change the width so you don't take another window out. Didn't even chop these stalks the stubbe stompers on the head did a nice job of breaking the stalk.

@@kolewiebensohn That was amazing!!!

Yup it's working out great so far, haven't chopped any stalks yet either.

yeah you are

I ain't ever seen ether make one fall apart. I actually just put a new bowl on it, I ordered it from all states ag parts and it fit perfectly.

@@kolewiebensohn lol yeah an it sucks lol. It turns all cloudy like, an then when you go to empty it your finger will go through it lol. There's a rubber connector at the bottom of the intake, an we drilled a hole in it an stuffed a 3/8 bolt in there so you can give it some while your cranking. But be careful if you do because you only want a tiny tiny wif, because now the either is much more dense because it's so close to the heads and it doesn't have to go through the oil bath. But yeah not kidding it totally trashes the dust bowl. It literally will turn the plastic into powder over time. Quite depressing lol... But just out of curiosity have you ever had the bowl off while it's running? That bugger sucks some serious air!!!! Lol... It's cool lol

@@kolewiebensohn and that's cool they make one that fits. At the time we replaced ours valuebuilt was big at the time. And they didn't have the right one. But now that i know it's a perfect fit i might replace it again! It's about time again

@@germanmg42 No I haven't actually, I can get she's sucking a lot of air. On my 3294 I had it running and about lost my shirt cause I had the air filters out at the moment.

@@kolewiebensohn hahahahahaha thats awesome lol

Nice evening to run from farm to friends place with the tractor I must say, cold AC, good radio and 19mph road gear gets er done!

It's a shit show Ed, to fill the water wagon I gotta run down the old road bed then spin around go back through the job sites down another rode bed till it's wide enough to them turn it around to go back another 500yds to the fill the shit tank with water, of course whilst trying not to run any wild rebar over and popping tires.

@@kolewiebensohn sounds like fun 🙄😂🤣👍

@@GosselinFarmsEdGosselin Slow asf but get payed by the hour so ain't bad lol 🤣

Trying to get it filled so we is ready for the morning even thought the engine that powers the crusher blew the coolant line from the oil cooler to the water pump. She was 230 degrees when we shut it off wide open.

Yup only lights that are les are the ones on the back fenders and one was broken.

@@kolewiebensohn despite the broken light in the back the amount of light in front really impress me

@@jimbaglas1709 Yes for halogen lights it's impressive, But there's a grand total of 8 lights up front so that's a lot of power their to emit.

It's still moist under the top of the dirt here. 5288 pulls this finisher like a champ

@@kolewiebensohn lol.. still MOIST on top of the dirt here.. Ya, not working it any..lol

@@GosselinFarmsEdGosselin We could use a tiny bit of the moisture here lol 🤣 only bout a 1/2 inch maybe

I wish I could dedicate this vid to Bruce somehow.

@@kolewiebensohn just do it...

It pulls harder than I thought it would haha

She's a runner! Clutch is a little finiky I just need to run it more often.

@@kolewiebensohn Looking fwd to seeing more of it!!