Видео

Margarett Avenue

Wayne Terrace

Hilpert Point

Will it work at 250 V main power and 230 V backup power? How much distance should be there between ats and other breakers on the din rail from both side? Can we switch to manual and then change the switch while device is not connected to any power source (just for checking the pushing force)? Thanks!

its have memory? to save the setting,if shutdown the power..

Will it work properly with invertors with soft-start function?

do you make 10 mA monophase type up to 25 or 40A ? CE approved ? Free info welcome Thank you

Buenísimo 👏 👏

Perfect. Awesome video. If I wanted to add this ATS for a home running 220v (2-110v legs) with neutral and ground, along with a generator that is running the same, how many input/output would I need on the device?

i don t understand if this module does have AUTO RECLOSE feature, or if it is only used as a remote (tuya) switch but can't reclose the mcb/rccd after tripping

why not doing with single module 18mm mcb? no need to use 36mm module for under 40mA mcb imho. and what is difference with this one or other similar wifi mcb that can also get volt, amps, wattage etc consumption etc

what I do not understand about these why have they got no ground Earth

👍👍👍

Pueden subir este mismo video al español?

I thought it is based on dusk/dawn and it appears that it is manually set when to switch lights on/off

What's the name

Which is for which grid system?

Thanks from Bangladesh.

So breaker before ATS?

how many seconds it takes before switch ? because of flickering....

Very important test is break zero neutral 400 v protection . And time over 15 min with 400v rezist and cut voltage. Is posible to view this test? And is possible to view official reseller adress ....e-mail.. web@adress and phone for every country in European Union in your Chinese Web site.?

A1 B1 A2 15 16 18 Right now can't see ur video in up saide wire connection.

Hi...can I use this to time my window air condition on and off? Thanks

Price

Instead you could show how to wire relay 🤷‍♂️

❤!Привет из России!❤

Thanks for your time

Thanks a lot for your time

Thanks for your time

How do you get it to stay off, but on standby? I need it to stay off until it gets a short signal. Then it needs to cycle once, then stay off until it gets another short signal which may not come for days

Thanks for your time

Please make video for connections of GEYA GRI-8-02 the under current relay and share it here

This has the same wiring as the delay on. How can this be used for two different switch mode?!

This is not working for me. It gives me only delay on. I cannot understand why.

Como conecto el timer thc 824

???

U should have showed us the wiring process

220 вт ми бу

Many thanks

Please do a video on the GRL - 8

The wiring is not clear

Is it suitable for DC voltage up to 500v?

Thats wrong! Exsctly the opposite is the case! Don't use Type AC anymore, only A or better!

I was last following to Mr.cherry

Geya always published Great and quality products . I am a geya’s follower . We are long time waiting for a new product (Electric phase changer with voltage protector) we are also your sales department around last one year . Some companies are already fast selling in this product but Geya still not launched. I hope very soon will be launch . If launch then we will do fast selling in our market

Except the intermitent switch on and of ,there were two timer relays in my old days, the timing from ON and timing from OFF.This one cover both functions.If you need sone intermitent, just use two OfFF timing relays.Those days an automated machine could contain about 400-500 relays with 3or 4 NC and NO, pressure and current protection switches, and about 200-300 pages with diagrams.Not always you find the machines diagrams but never the less you were compelled to repear it and fast and you could not mistake the electrical fault with a mechanical one

Except the intermitent switch on and of ,there were two timer relays in my old days, the timing from ON and timing from OFF.This one cover both functions.If you need sone intermitent, just use two OfFF timing relays.Those days an automated machine could contain about 400-500 relays with 3or 4 NC and NO, pressure and current protection switches, and about 200-300 pages with diagrams.Not always you find the machines diagrams but never the less you were compelled to repear it and fast and you could not mistake the electrical fault with a mechanical one

❤❤❤!

'PromoSM' 🙌

how many milliseconds of response time?