- Видео 350
- Просмотров 477 561
Louise Beauregard
Добавлен 23 июн 2012
Satchel Type Case with Pockets and Folders SD 480p
I have made this carrying case in two sizes in Cricut Design Space.
You can find the smaller size here design-beta.cricut.com/landing/project-detail/671f87678e194b5750747161
and the larger size here design-beta.cricut.com/landing/project-detail/671d3e669d4f0e09e6219826
You can find the smaller size here design-beta.cricut.com/landing/project-detail/671f87678e194b5750747161
and the larger size here design-beta.cricut.com/landing/project-detail/671d3e669d4f0e09e6219826
Просмотров: 294
Видео
Candelabra SD 480p
Просмотров 3029 часов назад
I created this candelabra using two different base materials. I have shared my files in Cricut Design Space File with kraft board base design-beta.cricut.com/landing/project-detail/6719526c2b6693bd9fd2a79e File with Chipboard base design-beta.cricut.com/landing/project-detail/671ac4d650615f5adacdfc68
Candle That Lights Up SD 480p
Просмотров 29814 часов назад
This Candle is made with vellum for the flame section and a small LED light is inserted to illuminate it. I have created two versions and shared in Cricut Design Space With Handle design-beta.cricut.com/landing/project-detail/67157922624bb00d8ef8471e without handle design-beta.cricut.com/landing/project-detail/671579527971580bbc3d17d4
A Line Advent Calendar SD 480p
Просмотров 347День назад
This Advent Calendar is made with 2mm chipboard and card stock, with watercolour card stock for the rooftops. I have shared this project in Cricut Design Space and you can find it here design-beta.cricut.com/landing/project-detail/67115fe20c2542c6a788f564
Life Is Boo tiful SD 480p
Просмотров 451День назад
This Halloween themed project contains three separate options, using test tubes for gifting or displaying candy. I have shared the files in Cricut Design Space. Single holder design-beta.cricut.com/landing/project-detail/67067da48e6ebc75304bf212 Double holder design-beta.cricut.com/landing/project-detail/67068067a62c8a11dfb3d6fa Apothecary design-beta.cricut.com/landing/project-detail/670827a6b...
Advent Calendar 2024 SD 480p
Просмотров 59614 дней назад
This Advent Calendar is constructed with interlocking pieces of 2mm chipboard. I have shared my file in Cricut Design Space and you can find it here design-beta.cricut.com/landing/project-detail/6706fcddc5043be1aab197ea
Halloween Sign Violators Will Be Toad SD 480p
Просмотров 32921 день назад
I have shared this Halloween sign in Cricut Design Space and you can find it here design-beta.cricut.com/landing/project-detail/66ff081a744282bede7995b5
Pumpkin with little lid
Просмотров 385Месяц назад
This small pumpkin is designed much like a cookie jar, in that it has a tiny decorated lid. I have shared this file in Design Space and you can find it here design-beta.cricut.com/landing/project-detail/66f6f4c7bd66340319faa085
Halloween Themed Lamps
Просмотров 416Месяц назад
I have four versions of this Halloween themed lamp that I have shared in Cricut Design Space. Tall base short neck design-beta.cricut.com/landing/project-detail/66edf95fa57ef71faff751e8 Short Base, tall neck: design-beta.cricut.com/landing/project-detail/66edfb70a57ef71faff7523b Tall base short neck with light design-beta.cricut.com/landing/project-detail/66edf7ddd54e7c40c1aede75 Short base tal...
Three Little Boxes In A Box
Просмотров 292Месяц назад
Once you remove the lid of this small narrow box, three smaller lidded boxes unfold. I have shared this file in Cricut Design Space and you can find it here design-beta.cricut.com/landing/project-detail/66eb5010343b2f7ad77020e6
Locking Canisters
Просмотров 404Месяц назад
This canister style box has a locking mechanism preventing you from removing the lid until you have guessed the secret password. I have two versions in Cricut design Space. Halloween themed design-beta.cricut.com/landing/project-detail/66e471f15b19057801d75ff3 Christmas Themed design-beta.cricut.com/landing/project-detail/66e59a7413040219beadc59e
Treat Box Star Shaped Closure SD 480p
Просмотров 282Месяц назад
Treat Box with Star-Shaped Closure design-beta.cricut.com/landing/project-detail/66e2ff02f22b97b020dcc7fb
Mini Knitted sweater embellishment
Просмотров 261Месяц назад
I created this little embellishment for one of my Cricut projects. The Cricut machine was not used for this his mini sweater, but it was made as an alternative to one of the embellishments made of card stock for my Fall Fun Themed Holder.
Fall Fun Themed Holder
Просмотров 394Месяц назад
This box has four different images on each side and rotates so that you can have a look at them all. The center box holds lots of pens. The file can be found in Cricut Design Space design-beta.cricut.com/landing/project-detail/66db2479141af723b8d4ce8f
Reinforced lidded Box
Просмотров 257Месяц назад
The panels of this box fold up onto themselves to create a reinforced box and lid. I have shared two versions in Cricut Design Space Smaller design-beta.cricut.com/landing/project-detail/66d4b8448c1466b14c84fb2f Larger design-beta.cricut.com/landing/project-detail/66da3ece315f3ca2bfcbd7fa
OMG! Spectacular 🌺🌺🌺
Louise, these are amazing, as usual!!! ❤
Holy cow! They are amazing.
Love this thank you lousie.. always appreciate your time in giving us all these for free ❤ Please also if you have time could you make a Christmas house for the elfs (the elfs head pokes out from the front of the house and his legs are poking out the front door I did try to purchase them but they sold out 😢 so ive not seen anyone make a svg for this at all .Tia x
Love this card but I work with the Silhouette program. Is there any way for me to purchase or import this file to Silhouette?
WOW! that is awesome. I have someone who will love this. Thank you so much! 😁😄😃
I love this project. Great job!
Is there a complete list of supplies
@@dianaspragg9853 clink the link in the description box below the video and it will bring you to the description page of the project in Design Space. You can find a list of materials there.
@crafty_lou7 I did that...I didn't see it on design space...just gave me the whole design to cut and etc...must be doing something wrong?
@@dianaspragg9853 This is what is says on the description page “ For this project, I have used 80 lb card stock, foil kraft board, shimmer card stock, printable vinyl, silver matte vinyl, a 1/4 in diameter kraft dowel cut to 4 inches and some double-sided tape.” There is pink writing on the design canvas itself that describes which material that was used for which images. Hopefully that can help?
@@crafty_lou7 thanks so much...appreciate it
Must have been a senior moment...didn't see it before...but I did today...however, so kind of you to follow-up
Thank you! Thank you! Thank you ! It's very beautiful!
These are gorgeous! Thank you for sharing!! 🕯️🕯️
Is there enough room to put tea light candles in there? Battery powered of course 😅
Yes please battery powered, lol! The diameter of the inner part of the flame is just under an inch and most tea lights are approximately 1.5 inches, so unless you can find some mini one (they do exist, but I have no link) they will most likely not fit.
@@crafty_lou7 Thank you ❤️
May have to try this but put Christmas elements on it. Thanks Louise.
@@cherimccain12 you are welcome Cheri! you should check out the candelabra that I just shared in Design Space! design.cricut.com/landing/project-detail/671ac4d650615f5adacdfc68 I added Christmas elements to it design.cricut.com/landing/project-detail/671acc1f160dbc7a54b781bc
Thank you so much for this video. i had a full blown brain fart on how to put this together after cutting it on my cricut. =)
When the files separate into pages, are they separated by material? Meaning like pg 1-5 are kraftboard, 6-10 are foil etc?
Do you mean, when you send a Design Space file to be cut? If so, the pieces are on the same mats as long as they are the same colour. For instance, if you want to cut certain pieces out of white Kraft board, you need to have those pieces all in the same colour and take note that that colour needs to be cut out of that particular material.
@@crafty_lou7 When you go to make it, it sorts into 45 mats. I am trying to figure out which mat is which material.
Gorgeous Advent Louise! I love the details with the little ornaments. And your trees are just fantastic.
I LOVE this project Louise! Great to give to kids as well as adults.
That Advent is simply fantastic Louise! You never cease to amaze me with your creations.
AMAZING! Great job.
Where do you buy your chipboard?
This is the BEST Advent Calendar I have ever seen.
Will you share a link to the tubes?
Amazing again… just perfect for my biomedical engineer son. He’s in the US…. I’ll fill them with smarties. Where do you get your test tubes
Another one of your projects that I love.
Thank you so much Jill!
Super cute!!!! Thx for sharing another wonderful creation.
Thank you so much Debra!
Beautiful!
What an amazing project. I’m not ready to step up to the Maker. I’m still trying to figure out the Explorer. I do love this project though.
Wow! A lot of work went into this. Great job!
Wow, what a fantastic project!
Do you have a supply list of how much paper you need?
No, I am sorry, I do not. It would all depend on the size of your materials that you are using. The best way to determine what you specifically will need, is from the project canvas, click on "make" and take a look at your cut screens. Similar colours are cut from the same material. Little tip: you can often reduce the amount of your materials by moving and rotating some of your pieces and by moving pieces from one identical coloured mat to another and optimizing the amount of pieces that you can cut from one mat.
I got it all put together, but the mechanism doesn’t seem to want to pop back out without pulling it from the outside. I’ve tried cutting away some of the inside hopper that looked like it was pushing down on the mechanism, but that didn’t work. I think I’m gonna have to take it all apart and start over. Cute idea, though !
Love the acetate one with the snowflake.
great video! What is the width of the redline tape you're using?
OH, it's very thin Debbie. It is 1/8" wide. If you have wider, then lay a length down on some parchment paper and then cut it to the smaller width.
I love it!
back again to make this for Christmas 2024! Thanks again.
Another keeper! Thank you Louise!
My next project tomorrow ❤
Thank you for always giving us clear assembly instructions!
You are very talented and thanks for always sharing your projects God bless you !
I absolutely love your projects and videos. Unfortunately, I don't have a digital cutting machine. Do you have a pdf version available please?
@@abuelafromhell I design entirely within Cricut Design Space and my files are created specifically for Cricut’s machines. I am sorry but because of the way that I create them, I have no PDFs to share.
@@crafty_lou7 Ah, that's such a shame, they are beautiful. Thank you for your reply. Take care.
I absolutely love your projects and videos. Unfortunately, I don't have a digital cutting machine. Do you have a pdf version available please?
Wunderschön 🤩Dankeschön für diese tolle Idee
what glue do you use??? the tip is so fine!
@@Jl-lr4fb I use either Art Glitter Glue (it contains no glitter, that is just its name) or Bearly Art Precision Craft glue. I like to transfer my glue into small precision tip glue applicator bottles with silicone caps. I can find all three items on Amazon.
Hi Louise, where can I get the monster truck megalodon instructions. I love that you have instructions for your work.
I need the Thumbelina Pop up card number for the Critcut machine. I don't have this machine but my daughter could do it, she has a Critcut so I need the information, I look forward to hearing from you Thank you Have a nice day
It sounds like you are looking for the link for the project in Design Space, Helene? It is in the Description box below the video, but here it is again. All your daughter needs to do, is click on this link and it will directly bring her to the project page in Cricut Design Space design-beta.cricut.com/landing/project-detail/63f7f60abc5599b1ce77ff43
I was looking for a slot machine card, and this popped up. This is so awesome!! I might try this for my boss for Boss Day. If I don't have chipboard could I use a heavier weight cardboard? Love the video you provided
These are great
These are ADORABLY CUTE! When you said "light", I thought of a "battery-powered tealight/votive/taper candles". After seeing the tiny light, I was wondering if the file could be "edited" to be able to accommodate the aforementioned possible alternative?
My goodness, these are great! You're incredible, thank you so much for sharing your talent!
I love these!!
Love these!