Видео

I like the vans grips. Sick.

Trendy dyna bro overpriced.

Just for size reference the headlight is 7.5 inches

Pls take me with you next time yeah?! ❤🎉

😮😮😮 I am so jealous!! I wanna travel !!

I was once thinking about lowering bike as well as I’m 5’4-5’5. I just got the le pera kickflip upfront. Got me closer to bars and about half an inch higher and I was a bit concerned about coming to a stop but the comfortability and how it locks me in, I would rather tippy toe coming to a stop than having to scoot forward to control the bike at slow speeds. I normally slide my butt to the left and just plant one foot down. Def did not want to compromise lean angle. I have 10 inch kodlin risers and they fit perfect now. I just tilted the bars towards me about an inch

Like an subscribe 🤘🤘

After all this time how did you like the 9.5 risers? The stock ones hurt my back. I’m 5’6” and I don’t know if I should get the 6.5 or 9.5’s

5’ 4” but beard acting like 6’ 4.” Thanks for this, I’m 5’ 6” and this looks like it would work nicely.

NICE CAR!

XF my bad

Sounds great

There chrome parts are the shiznits💯💯💥💥🇺🇸🇺🇸

Just put a turbo on then your boosting

The kickflip up front is narrower than the tailwhip and would move you 2 inches closer to the bars. It's also cut narrower in the front so it would be easier for you to get your legs down. Me, I am getting ready to do the daddy long legs. I am 6'3", and I have a 23 FXLRS which is pretty much the same bike without the extras. The saddlemen step up I have on it now is nice, but I need more room to be truly comfortable. You could probably throw that seat up on the net and get close to what you paid for it if you wanted to recover the money spent. Ride good.

Sick bikes

🤘🤘🤘🤘🤘

I mean, their anodized like every other companies parts. Really only one way to anodize parts…

How cool are the original wheels remade in 20s 👌

Is this in wa

Ive ran alot of aftermarket parts that are anodized and they all fadded within 6 months. I dont run anything but billet options now. Little bit of polish and it looks new again

Those painted parts usually fade no worries there, although their stuff is over priced, the same grade aluminum is available for much less in many other companies.

I've been getting slyfox stuff for my bike. The quality is just as good, the prices are better, they also have carbon fiber parts. But the biggest difference is they actually have a race team that runs their products. So they are put to the test. Thrashin looks the part but slyfox plays the part.

Their T bar riser setup would flex side to side on my old Street Bob. Local HD dealer said it was a bad design & cheap metal. Switched to Kraus and never had an issue again.

Also comes down to how you clean and protect the bike too mate I have seen many use a nasty cleaner on there bikes and spokes and anodised parts go to shit,my bikes 12 years old I ride it wash it but I use all of bowdens car care range the sealants keep the finishes nicer I like thrashins gear they have nice billet bits and use good arp stuff there grips are $40 a set so I’d expect them to burn out fast I run the $100 Arleness grips and pegs was $300 for grip shifter n foot peg good price and haven’t had any wear issues

I have a low rider s and I've had it for 2 years. I've added mostly all thrashin. Started some Amazon crap and eBay crap and it faded quick the black and colored even worse. Once i went thrashin even though they were pricy the black stuff is still full color but the gold pegs did fade like yours after a year but they do get used daily so i went back to black and ive stayed. And i dont have a garage, so it's the sun. I bought a gold handlebar from pazoma, and it faded in a month compared to thrashin a year. So i bought a thrashin handlebar.. I have black flo pegs and shifters on my road glide and they still same color as black thrashin. But noticed everything colored fades faster than black.. no matter what brand.

I refuse to buy and install their overpriced crap.

Wear and tear, normal. Grips are bad but it’s their first time doing grips get ODI..

That faring looks awesome!! Now paint it the same color as the bike and it will look even more awesome!!!!!!!

I wish I had gone with a cheaper bar... by the time I got it installed it was all scratched up... my fault but you know I could have spent less

Killer !! Bit different to the roads out here. A lot more skill required

I have went in other directions with my bike because I don't think that the finishes on Thrashin products would stand up to a desert climate. I also think that they are way over priced on their products. I bought from Original Garage and Bullitt Worx. The modular mini floorboards from Bullitt Worx have way more versatility for approximately the same price. And the rear engine guards from OG ($450) replaced my passenger pegs and they are anodized slider caps, that are replaceable for around $40-50. Thrashin made a name for themselves on RUclips and they capitalize on it with over priced parts. It's a excellent marketing ploy that they thank everyone they see on their rides that have bought their parts. Doesn't hurt that they are very entertaining to watch.

Ha! I can’t believe you’re talking shit about thrashing cuz the ano on the pegs are wearing lol. Your foot is constantly rubbing against that. There absolutely nothing you could do to color those and have them be colored a year later without any wear at all.

I'd be BULLSHIT!! That's freaking crazy !! 2 grand and that happened after? Wow!!

Have you talk to thrashin about the fading and do you keep the bike sitting out in the sun all day just curious??

Hard grips. Black Rubber Heavy Duty. Keep Going 😊

I do like their products but I find that they are just way too over priced. The risers I think are their hottest seller for the lowriders. You can pick up a bungking risers for like $200 usd. I think I paid almost $600 from TS by the time it was shipped. I don’t mind paying a little extra for good products but they are price gouging.

I think no matter what the brand...any item that has hand or foot contact or exposed to the elements, sunshine, rain etc is not going to look like new after one year of service.

Avon has been a staple in my bike collection for grips and pegs. Cant beat the price and quality. Your risers cost as much as what I initially paid for one of my sportsters and it ran.lol no offense but thats kinda sounds ridiculous. Matter of fact you got more in pegs and risers than I do in buying 3 out of the 4 bikes i currently have. I stay away from Big names as much as possible, thats all your buying is a name. Nice looking bike though.. Check out some Avons brother, I got no complaints..

Glad someone has said it cause especially for the price of them it’s insane, love the blokes behind the brand but definitely cheap quality parts when it comes to colours, I’d say the raw ones wouldn’t fade at all or look as bad and it’d why I see most the thrashing guys only use raw or stainless

Trashin eh?

Looks like you keep your bike outside or do not clean it very much.

I understand the grips, the rest should be better. I would contact them

Wow, that is really shitty. Time to get some ranting and raving going on and get some free products in this case refund.

Some items like bags and such are way over priced (Viking patriot bags $199 USD or the same bag that says thrashin on it...$399 USD) same thing with their bar bags I run a first aid bag that has velcro moly straps I got for $9 vs their bag that is $75!!!!) I personally wouldnt sped 100s on bars (have been running emgo bars for years on stuff and or renthals) Emgo bars with similar bends..$35. I also dont have 1000s to spend on parts but also if I did I wouldnt.

based on some of your other videos, like you installing an exhaust in the dirt. I'm gonna go our on a limb and guess that you don't store your bike in a garage. Can't really talk shit on a product when your bike is parked outside in the sun non stop. doesn't matter who made it anodized parts are gonna fade when stored in the sun.

ALL of my arlen ness colors have faded really bad which is why I’m going to go with Crossthread. All my red stuff that was once super awesome is now a faded pink and looks dumb.

I don’t think they’re anymore over rated than Arlen Ness or anyone else. The prices are competitive with the other big names. Still expensive. But competitive. I won’t pay for it but I still love the company. I’ve recently found Crossthread for pegs, floorboards and levers etc. highly recommend them over the names you’re paying for

Wow crazy prices , I’ll stick with my jap bikes

Yeah at those prices wow.