- Видео 63
- Просмотров 228 007
cjhtas
Добавлен 24 май 2010
How to do pin 7 mod Lcruiser 2003 = selectable difflock low gear
This modification allows selectable difflock in Low gear on Landcruiser wagon 2003. Original setting is fixed difflock. I wanted the option to drive at low speed with no difflock.
A previous video described the method - but after it had been done. ruclips.net/video/9b5Fc-f5kww/видео.html
Essentially all you do is disconnect pin 7 from the Transmission relay. In practice it was difficult because of the very tight space around the connector. This shows step by step what I did.
A previous video described the method - but after it had been done. ruclips.net/video/9b5Fc-f5kww/видео.html
Essentially all you do is disconnect pin 7 from the Transmission relay. In practice it was difficult because of the very tight space around the connector. This shows step by step what I did.
Просмотров: 146
Видео
Making violins from seaweed
Просмотров 1942 года назад
Emily Sheppard is on the left in the duet, Marlane Bennie on the right (and playing at the end, Emily plays the final piece). Both are professional violinists. Tasmania has some of the largest kelp in the world and Emily is also an honours candidate in Hobart studying ecological use of seaweed. Emily made a kelp soundbox for the amplifier chain for her violin at a festival a year ago when a mut...
Bose Quiet comfort ear buds falling out - fixed forever!
Просмотров 12 тыс.3 года назад
Bose Quiet comfort earbuds are great - I can use an angle grinder and listen to a classical music. But...they fall out. Despite all the tutorials and instructions...they fall out. Read the forums and ... they fall out. Probably not with everyone, but with my ears they just don't work. My solution is to mould silicon putty into my ear and enclose the earbud ear-hook. It doesn't look pretty, and ...
Simple cheap effective blade sharpening
Просмотров 1,3 тыс.3 года назад
This is a sharpening setup I've used for years. Works well, and I've never seen the need to change it. I use it for chisels, plane blades and knife blades to keep them sharp. Cost me pretty well nothing - good value! NOTE: the wheel rotates AWAY from me. This is so a blade cannot dig in and flip back at me - you'll only ever make this mistake once!
Simple strainer assembly for fencing
Просмотров 5103 года назад
Simple strainer for a short fence. Wouldn't do for a long run, but great for speedy fencing. Make sure the star pickets are well driven in.
Mawsons Huts Replica Hobart build and installation
Просмотров 724 года назад
This movie follows the building of the replica of Mawsons Huts from the first plank to the final placement. It was taken using several fixed timelapse cameras, and hand held still and video cameras. It was filmed and edited over some months by myself with help and advice from others. The replica of Mawsons Huts is a faithful copy of the original pair of huts at Cape Denison used by Douglas Maws...
Lifting pavers using high pressure water to clean edges
Просмотров 4 тыс.4 года назад
If the paver is stuck it helps to use a high pressure jet of water to clean the edges. The paver lifters, which are a very easy way to extract a paver without damaging it, are easily made. This is described in this video: ruclips.net/video/7e55D2jLW2Q/видео.html
How to lift pavers without damaging them
Просмотров 79 тыс.4 года назад
One of the most difficult things about a paved surface is lifting the pavers out of the surface without damaging them. In many cases it is impossible, and various techniques such as using a screwdriver, prybar, hammer etc end up either breaking the edges or damaging the paver. In the end it is often easier to break up a paver and pull out the pieces. Here is an idea for non-destructive lifting ...
Make a simple mini-plate compactor for sandstone paving slabs
Просмотров 26 тыс.4 года назад
Limestone pavers need to be tamped onto a sand base, but commercial plate compactors/vibrators are too heavy and crack the pavers, while a hand compactor is hard work (and we broke a couple of slabs with it). This mini-compactor is made from scrap I had lying around. It is much smaller than commercial ones, weighing only 30kg with 1/4 HP washing machine motor. Took a day to build, works well, c...
Log splitter to hydraulic metal bender simple conversion
Просмотров 7 тыс.5 лет назад
This took an afternoon to make. It's very useful, especially since it's portable.
Log jinker
Просмотров 1 тыс.5 лет назад
This shifts logs up to 7m x 750mm x 2 tonnes into the Lucas mill (or to shift anything heavy). The tongs are used to lift the log off the ground to sling the chains underneath. At the end is shown a 'cant hook', or 'peavey', used to roll logs. There are no plans, I made it out of available scrap. The main beam is 90 x 90 x 3.5 square section, sliding into slightly larger sections at each end an...
Trailer unloader
Просмотров 7 тыс.5 лет назад
Simple trailer unloader. If using a big trailer tie a rope zigzag across the straps to pull the load together as it leaves the body.
Milling with Lucas Mill
Просмотров 3419 лет назад
In a bushfire a large number of Blackwood trees were killed, so we bought a Lucas Mill to let others have access to the beauty of the timber. The Blackwoods from this area are especially lovely because they have spent a long time growing in good soil next to a pure creek. The figuring in the wood is unusually varied.
Bending PVC conduit
Просмотров 6419 лет назад
For small pieces it's easy to put them in an oven at 110 deg C for 5 minutes, slip a rope inside to stop the PVC kinking, then hold it in place for a few seconds.
B09B cropped melt 2014 slow and loop images
Просмотров 2049 лет назад
This shows the advance and retreat of ice in Commonwealth Bay from late 2013 to 31 Jan 2014. The iceberg B09B, seen in the bay, is blocking access to Mawsons Huts at the head of the bay. It can be seen that the iceberg is starting to move back and forth now. Images are taken from the NASA site: earthdata.nasa.gov/labs/worldview
EOS gbt deliflickered sunset 1st night Nullarbor cliffs
Просмотров 20112 лет назад
EOS gbt deliflickered sunset 1st night Nullarbor cliffs
Caulk em! Mine are ok if I sit very still and breath very shallow. Thanks for the idea though.
Great video!! It’s so simple. I wish I would have thought of creating that tool! Great job
Great job, thank you!
Excellent idea thanks
I love your ears
Gorgeous!
That technique is just fantastic. Thank you for the great demonstration too.
Nice detail. Thank you.
Estupenda herramienta. Wauu. Y. Yo. Comprando. Una. Herramienta que costó. 280 dólares.
How thick metal will it bend
I don’t know what the limit is but I’ve bent 6mm steel without a problem.
Thank you for sharing your knowledge
Hey this is excellent mate
Brilliant - thanks for sharing
8:49 Ok, I know this wasn’t intended, but it looks so cool! That’s a pretty slick trick with the pavers. I had to do this with a 4’ square patch of multi-sized pavers a few years ago - I could’ve used this method back then. Oops! I missed it! 😂 Thanks for sharing that!
man ain't nobody got time for all that
Great idea. I've just laid 180 flags and there's a few that have sunk already. I'll give this a go. Thanks.
This saved me hundreds $$
Great idea thank you
Awesome idea!
Brilliant
haha, so attractive
Thank you for that video I’ve been using screwdrivers for years and struggling and knew the was another diy method and you have shown me your way 👍🏻
disgusting :DDD but thanks for solution,,,I will do better looking :D my right ear is good but left no...or some 3D printing will fix it to
Just made some from an old tenon saw and used them to lift a 24" square slab that had been down for decades. Worked brilliantly, so thank you for the instruction and the inspiration!
This is such a brilliant idea. I wish there were a way you could patent these and make millions. Thank you for sharing your genius with the world. I look forward to trying this.
great stuff
I loved your video...and I would like to thank you for sharing your amazing knowledge with us....God Bless you
Very cool of you to share. Cheers :)
You shouldn’t have to do this to get earbuds to stay in!
What should you have to do?
@@Frindleeguy nothing!
So smart
Fantastic ,great idea,just what I was looking for👏👏👏👏
Just brilliant, thanks very much.
That is awesome... You'd be a great neighbor to have...
I have the same problem. Thank you for this genius idea and instructions. But do they fit in the case to charge?
They do, but you have to squash the silicone a bit to get them to fit in the case.
Well done, I like how you show the WHOLE process. This is the best solution I’ve seen to this pain in the A problem. Hats off
I hate having to spend more money to get these things to fit, but it's better than having to throw them in the trash...You'd think for over 100 bucks, they would have something that fit. Thanks for the idea, though, not your fault the engineers at bose can't do their job.
Maybe instead spend money to get your ears fixed ;)
@@Frindleeguy Oh shut up, the vast majority of earbuds have no issues like this - because they actually go INSIDE your ear, instead of having an "innovative" flat design and a hook because the flat design sucks so bad. Bose makes good stuff, but here they just didn't test these enough. Which is not amazing considering the high price.
Exactly. They could have just put a damn ear hook option but nooooo
Brilliant idea, You are a star.
Good idea for cheap or recycled timber. Looks like your wire brace is around the wrong way.
Many thanks for your knowledge and tutorial. I was over thinking my issue of lifting some 450 square slabs and chanced upon your RUclips video - fabulous - I quickly made a couple and they have worked effortlessly. 10/10
Thanks. Best demo vid on the net. I appreciate the time you put into making and posting this.
They come out of any ear I guess. They need to design them better
They're easily the best designed ones on the market period, by a lot. Like, a lot a lot. But people are weird and all our nooks and crannies are different. There's probably a lot of accessories I use that wouldn't fit you ;)
@@Frindleeguy Oh shut up, the vast majority of earbuds have no issues like this - because they actually go INSIDE your ear, instead of having an "innovative" flat design and a hook because the flat design sucks so bad. Bose makes good stuff, but here they just didn't test these enough. Which is not amazing considering the high price.
Thank you Sir. An ingenuius idea.
Rent a wacker + attach a bit of carpet under the thing to prevent breaking the stones.
very nice, I considered doing a full mould of my ear canal and effectively creating an IEM like my wired earphones but I didn't want the hassle of having to remove them when inserting back into the case. I didn't think about just moulding the hook though for a little more stability though. Thanks for the idea, going to see if I can follow your lead but trip it down so it still fits in the case.
Hello👋🙋♂️ there... Amazing and very interesting video🎥👍👍👍 Super like👌👌👌 Good information and very helpful.. Thanks for sharing Do keep posting Warm regards and best👍💯 wishes The UnknownManCub 👍😎👨🏭
Great video! I love how you showed how you had to demonstrate a bit of persistence and make minor corrections if the initial attempts failed! Thank You!
Thankyou for such a good demo of sharpening, I've never thought of using MDF for a wheel though, but what a great idea. Jim from AUSTRALIA.
Great !
Amazing
Anyone who takes the their time to teach another ought to be respected.big respect to you sir a valuable inexpensive tool that will surely come in handy for me