Видео

what i want for my first mod

正呀❤

地址在哪里

❤️ 你啲架撐好齊，好吸引

SAM依然很靚

😊🎉

👍👍👍👍👍

❤支避震整完好似換左部車咁，精神哂，好彩搵左sam哥整，好小車房咁有心機，定期維修保養真係唔可以慳👍🎉

想請問2017 R6 原裝尾避震係唔係冇得rebuild🤔

no entendí nada ya que no deja poner subtitulos generados pero el video igualmente es muy bueno, hasta ahora el unico que encontré de este motor

mr top spring ttx同dds差异条片几时出街吊咗我哋好耐了🤣（好期待啊aaa亦都好感谢你辛勤科普讲解

Do u have a workshop in HK? I want to install for my RS660

How is the bikes performance now with the upgraded suspension

You need to strip the tank, airbox, rear hugger, wheel etc just to get to the shock? 🙈

Podria mostrar la parte del video donde quitas el tornillo superior?,gracias anticipadas

有狗狗幫手操😂😂😂😂😂

每朝瞓醒做，60-100下，包你keep 到 😆👍🏻

What size of needle you use for releasing of nitrogen?

What you are drilling? What diameter of drill you use and for what reason?

Can use the original than change inside spring ohlins

Hi, can I ask you about some informations for this kit on CBR600RR PC69? Thank you

老兄，请问这款头灯点样调高低的。

Mirror name or article code

點解咁新嘅車都要rebuild engine😅？個車主好粗用？

依個保養連工包料大約幾錢？❤

You can’t show an exhaust without letting us hear it

十萬公里前需要換離合片嗎？

Bro, nice 😂

7.20 zx25r好中意距概指针仪表可唔可以装到zx4rr上面嘅

我想問下10sp換總泵同離合可唔可以保住個定速巡航？

加油,好專業

台zx4rr换咗over摇臂有謀体感实质变化🤔

Do the fork tubes require a press to remove any internal components like on a Ninja 400, or do the K-Tech cartridges just drop in?

也就是說 多連桿雖然壓力較大 不過因為運動行程小 可以做出更精細的調控讓整個車高適應更大的起伏對吧

有用‼️

部車想做維修 想問有聯絡方法嗎? 謝謝

中賽

去哪里买啊楼主

Good

請問樓主是否Sam ？

背景聲音樂太大可以唔使

60😂wtf

ho lun pro😍😍

好詳細

5:39 160Nm, 假設後彈簧率, 個單位應該係mm (millimeter), 即係Nmm, 同Nm差1000倍

55秒😏

2104437

請問 如果長度一樣 彈簧磅數也一樣 能移植另外一台車的TTX給yzf r1使用嗎

i just did this job on my damper and if you don't have the correct tools its tricky but doable you can use a small piece of clear rubber tube to hold the adjuster, spring, and two balls, in place as you drop it in place in to the damper body just keep pressure on it as you start to turn the threads, also a large pair of circlip pliers undoes easily the end caps , and to remove the circlip i used a bent pin i used the sharp point to lift up the end of the clip then rolled the pin underneath allowing me to then twist and remove the circlip with needled nose pliers with out damage also take along time to put oil in and make sure there are zero air bubbles or there will be a certain amount of play