Видео

It's the bushings in the levers

You guys are doing great!

Where in Ohio is this held?? Grew up in NW Ohio, but have been in Texas for many years.

how do you remove the fender pan from 140

I rebuilt a KT-17 series II in my wife's 782. It's really not that bad a job to do rods in(we lost an oil seal). I was surprised how good it ran as i had never done one. Our series II had the plate so we added the external oil filter and an oil gauge on the dash.

What a raggedy ass POS. Wheels and mag are wrong for a 26, it leaks fluids like a syphlitic whore and is only running on 2 cylinders🙄 heard the guy that owns it is hung like a chipmunk. It's only 3 inches but smells like a foot.

Don’t go through cold weather without antifreeze

Yep at 1:28, still a little bit rough running. Maybe the carburetor??

Super Clean, purple color, cleans up the grease off the tractor.. Heavy grease can be attacked by mixing dry Tide laundry detergent and lye. Make a paste and paint it on , keeping it damp with a spray bottle of water. It will boi Off the grease, then you can spray it off with a garden hose.

Coca Cola has phosphoric acid in it, which will eat up the rust. You can also find cleaners that use phosphoric acid. Once rinsed out then add antifreeze 50/50 mix .

Robert’s Carburetor has videos on how to clean and repair the carburetor. Your tractor sounds like it might need to be cleaned. A few passages blocked can have a lot of affect on the running of the engine. They also show you how to easily remove the brass plugs to clean the passageways.

Get a parts book and then you can check around for the parts that you will need. Some sources can cross reference from the dealer numbers.

Thats a dyno. It pumps hydraulic fluid through an adjustable valve to restrict the flow, and it calculates the power through pressure and volume. A *Prony brake is entirely different, measuring the force on the end of an arm on a band clamp to calculate torque, and you make a calculation using that torque number combined with the rpm readout to calculate the horsepower.

You should've just rattle can painted the parts you took off and cleaned - then slowly it'll look cleaned up and it'll be easy to identify what you've fixed.

Man i wish we had more of these here! Thanks for sharing. 😊

Show me how to install the spring that helps the lift

What do you mean "the pedal is back"

I have a JD 317 kt17 1981 blowing oil out the filler tube got any idea

Imagine 1860s just steam fires spewing up out of the darkness

12:29 ignore me hitting the branches with the canopy 🤣

31:01 All around the LaGrange engine show The 140 moves moves with easel. But when you try and pull with it. POP goes the tool chest

Did you go this year? I did.

How do I get to oil drain plug

That's a nice b! Enjoyed the video! I have a 49 b, and a 68 110. Went to the tractor show this weekend, and just got them back home. I enjoy seeing videos about the b tractors.

Don’t use a steam cleaner on the air filter element!!

Bolts should have clutch head inside of top.

Very Nice Jon. If you ever pull the radiator out, I would give a good coating of probably black semi gloss paint. A friend of mine that operated a radiator shop ago told me that the black paint helps in sealing any tiny pinholes that may be in the radiator. He also would take 2 scoops of a substance used by radiator shops of what he called “Core Sugar” because of its powdery white appearance.which looked like confectioners sugar. The “Core Sugar” would seal internally while the black paint sealed the outside. Sounds like you have your John Deere dialed in pretty well.

I’m sorry about your friends passing but it sounds like one of the best things that you can do to remember him is make a baddass 214

Why is the guy in the orange shirt remind me of Joe Pesci from Goodfellas? I guess maybe just the way he sort of talks?

I have a series 1, it still runs

where is you ground from the battery to the frame ran? have issues with my 316k!

I like the taillight on the engine cover, cool old school

Ever owned one with the pedal control for the transmission? Opinions, if so, just curious.

The funny thing is that the comparable Simplicity it competed with, the 7117, used the same exact KT17 with great success. It also came with a limited slip differential, whereas the Deere did not. Which is also ironic, since Deere did offer more in the way of rear attachments.. that could take advantage of such a differential. Having plowed snow with both, the Simplicity was hands down the better machine, for that at least. Excellent video. 👍🏻

this is the first time I've seen a 317 with power steering!

Where's the idler guide at? I have a 60" Titan Max, very similar to yours

I have a John Deere 212 and when I took up everything with the plow and go to put it up it won’t stay up got any ideas on what it would be

I can't hear it.

Dark but thanks

Hello Jon, Supposedly “I Save Tractors” has the Kohler fuel pump rebuild kits - I cant say one way or the other regarding how good they are. Looking forward to seeing the next video regarding your Gravelly tractor.

I can see me in the video!

I'm taking one apart now and I have removed both bolts at the top of both axel tubes and the belt freedom spring. It seems to be hung up not coming out!

The 316K is the most underappreciated machine of the entire 300 series, imo. An extremely capable machine.

K341? You dont want that 341aqs is the one you want... 34q didnt have a dipper so on angles mowing it wouldnt oil the rod

Just a dab of oil om cotter pin and inside of pin and u'd spend a loooot less time disassmbling!

I like your videos and enjoy the explanations. I am starting my own little restorations and trying tk start working on more small engine stuff. I just bought a hydraulic lift 112 from an auction and deff appreciate all the explanations and the longer videos that really help explain what’s happing

I don't know what it is about that tractor, but i think that's my favorite tractor of the bunch.

I like lawnboys because my neighbors don’t 😂The stinking carbon fertilizers your grass while you mow

If you put foot underneath it will start😂