Видео

@@JonaverseNo.1 Thank you very much! I have not flown either of the other wings but a friend of mine has both the T1 and Altus and he likes the Altus better. I think now with the release of the VTOL kit for the Altus it’s a really great wing. My only complaint, and I can’t compare to the other wings is, the Altus is not well designed for newer action cameras. I can get my GoPro Hero 4k in the front and if I remove the mounts on the 11 Mini it just barely fits.

@@smithe68 I appreciate your reply, I think you also have an AtomRC dolphin, what do you think of it, and how would you say it compares to the Dart xl design?

Thank you 🙏🏽 Yeah and this is just straight out of the O3 using built in rocksteady stabilization!

@@LisbonDayTrips thank you very much! I haven’t done much lately but I think about it all the time. Have a great day!

@ thanks actually your content is similar to mine

@ checking your channel out now and subscribing for more!

It’s a damaged O3. One of the UFL connectors broke.

@@Mike-jg9fp Hello and thank you 🙏🏽 I made the upgrade myself and you only need to use 1 of the FlyFishRC Dual band antennas. You just need to disconnect the stock antenna extensions that the MOZ7 uses and connect the new antenna in the 2 vacant connectors on the O3 Air Unit. You can just mount the new antenna in the middle. I didn’t even remove the stock antenna extensions from the mounts, I just coiled up the wires that connected to the O3 and left them tucked inside the MOZ7. I hope all that makes some sense. Please feel free to ask more questions if needed.

Honestly I have not had a chance to really test it for flight time and I really haven’t been flying as much as I would like. For what it’s worth this flight was on a 3300mAh 6S lipo and there was some battery left.

I can tomorrow. Will the stock pids be of use with your new FC? What one did you go with?

@@smithe68 it should same frame , same motors. Just the tune should work. I got mamba f7 AIO so I can fly 4s and 6s

@@HasithaJayathilake sorry for super late reply. What's the best way to get this info to you?

@@fiferox I will have to plug in and check, I honestly don’t remember. I’ll get back to you later today.

@ ok thank

@@fiferox sorry for the long wait, no mag.

@ Thank you maybe next time I will w ok a few feet more before the launch.

Yeah I’ve discovered that’s really my only option. They all run so freaking hot and then other electronics get hot as well. I’ve seen a few people have success with everything internal but I’m thinking they fly in much cooler temps?

Thick you very much!

Thanks 🙏🏽

Thanks!

I’d say 4 minutes and I usually fly with speedypizza 1200mah 6S lipos.

@@smithe68 is that with a GoPro or just the O3

@@jonathanibarra7463 just the O3 and flying fast. If I flew slower I’d get more time.

They handle it great with 3" props. It is definitely too high a kv for bigger props though.

@@smithe68 I see,that makes sense... Happy flying!

@@stst8301 thanks, happy flying to you as well.

Hello, I’m really sorry but I do not have the G3s, I’ve never even seen them before in person. I know recently some connectivity issues were fixed. I would look and see if mads tech has anything, he’s really up on this stuff. Sorry I can’t be of help with this.

@@ryangagnon5489 best things are good high gain antennas on goggles and your quad, taller ones help too. A better analog VTX that can output more power will also help. Before I converted this to digital, I was able to go out a mile no problem with the stock analog setup. How far are you getting out now?

Thanks man! I'm digging it too!

@@dragonazzFPV glad we stopped too, I was questioning it at first then was like, F it, let’s do it! I’m pretty happy with how it’s flying and the smoothness of it, not that my flying is smooth 😅

@@BigKahunaFPV thank you very much. I am really liking it, it does fly well. I fee like I do have it under control now, at least with the Caddx moonlight kit. I’m still struggling with it when using other Walksnail setups but I will figure it out.

Thanks ✌

@@smithe68 you're welcome!

@@sashabagdasarow497 hey! They are so nice, way batter than stock. If you’ve used any other AGO1’s these are just as nice as the bigger ones. So silky smooth and solid feeling. I’ve barely used my other radios since installing them.

@@smithe68 Woow, awesome. I'm gonna buy them now

@@sashabagdasarow497 I hope you like them as much as I do. I handed my pocket to a friend who also has a pocket without AG01s and he really liked the feel as well.

​@@smithe68 I'm sure I will :) Getting my first drone this year

@@ocdraridrogonel I hear you, it’s so weird how that works. I’ve seen the same with the O3 in quads, some have no issue, others it’s a nightmare and I experienced both first hand. I think in the case of this little cinewhoop, some of it is getting Gyroflow to work properly and some of it is flight style/radio settings. My particular gofilm is pretty smooth without Gyroflow though, so I got lucky I guess.

@@smithe68 I'm building one as we speak and putting the build on my other yt channel, I'm doing so much research on it, even putting different motors than the caddx, dampeners on each motor, searching the PID research and going to put a gps on it as well, seen a stl file for the front point near the camera, they have a file to put a gps unit on this thing, I'm going to use it for cine style and I want it to look good without having to put a GoPro or peanut on it.

@@RCTech9956 I’ve seen 80mph with it.

Thanks ✌

@@RCTech9956 I’ve gotten around 80mph and have flown over 1.5 miles away from me with it.

@@WhiteTrashFPV I’ve heard good things about that model. I actually have a good mic but I forgot it 🤦🏻‍♂️ I got a fantastic deal on the previous generation DJI dual mic setup, it’s actually quite good, and records internally or on the device it’s hooked up too. I didn’t actually plan well for this but I wanted people to see how good it was from a non pro reviewer. Thanks for watching and the great suggestion, I’m going to pass it on to a couple of my coworkers I fly with.

@@HamptonFPV Yes it is!

Yeah it’s wild how good it is. I could see better in goggles than with my naked eye. Take care brother!

It is, I’m really impressed. I’m hoping to try it in even less light soon to see how it does.

I think so too. I’ve seen others videos but had to see for myself.

Thanks, I like it a lot!

@@stevo43068 the katana looks really cool! I think you will like it, these little trucks are very capable. I need to show my buddy this, he owns a Jeep and has the FX118 and the hobbyplus truck as well.

Thank you. I didn’t weight it but I can tomorrow. I used an Auline 4000mah 4s li ion.

@@brambo4776 1018g with DJI O3 and AtomRC gimbal with just a pan servo. I’ve since changed it to a Walksnail Avatar Pro HD and it weighs in at 1008g.

Thnx for ur information....

Thank you! Cheers!

No not waterproof. A little snow has never done any damage.

@@gregorydahl mine came with 4.4.x, can’t remember the exact version now. I was just messing with mine, put 4.5.1 on it, which is giving me some issues that I am trying to work through.

@@_evL_ this is from the O3! It’s such a stable platform and really gets the best of the camera. Thank you for watching and enjoy that beast!!!

@@smithe68 Thanks EriK. But what I meant was the Camera you were using at home... 😆

@@_evL_ oh haha! Pretty sure I used my DJI Action 2, it was either that or my IPhone 15 Pro Max. Those are the only 2 cameras I use.

@@UAV-AP thanks brother!

Thanks 👍

Thanks!