Видео

Great light install on the frontier. very helpful. Thank you

Not a Diesel??? Where's your shutters???

Aesome video man! Is there any way to only pruchase the mounting brackets from you?

What a efective Pry hand's !! Great video !

How bad is the hood reflection?

Why didn’t you show it at night 🤦‍♂️

I don’t think I want one of these that bad. 😂

my lights flicker on and then trip off and i have to reset the feed in the tesla screen

Would like to have a special bracket for the grill shutters that have only 1 10mm bolt on each side. Had to fabricate our own brackets for it.

Good video thanks!!

Hey M&R. I put in the Reverse lights a week or so ago, and I had some criticism about the thoroughness of the instructions. I installed this light bar today, and these instructions were much clearer, and if weren't making them available for me to watch last month, I probably would not have purchased them. They were really straight forward....BUT it was still lacking in a couple areas. Your video shows removal of the harness with the grill, but 1. does NOT say "how" to disconnect the attachment (which lead to some fear of breaking the clip) and 2. did not mention removing the small hose to the camera washer. That would have helped during my install. Also, you mentioned the 8mm bolts, but did not mention that the attachment brackets required 10mm, nor did you mention needing torx screwdriver for the side brackets. Not "that big" a deal for a person that owns tools, but would be nice in the description to list "here's what's needed"...1, 2, 3, etc. Not being picky but as I mentioned, your pretty good instruction video is what encouraged me to purchase and install on my own Great Job. Next post is a link to my video on FB. Thanks again. Please let me know if you make something custom for the 3 amber marker lights or some top lights for my baja bar. 2 THUMBS UP!

Finally, he busted out the nut driver

Just got my light last week. I need to go get a few tools today but looking forward to it. Looks like a great install video and I really appreciate how in depth it was. I’ll let you all know how I make out. Cheers 🍻

Yea I'll stick with unobstructed air flow. All that for a freaking pretty boy light bar. Nope !!!

Could you guys do a demo of the white light on road, or on open terrain? It's kind of hard to see the range/throw of the light in a fenced in area. Thanks!

I have a problem with this video. I just took off an upper bumper cover like he shows. Mine was a 2022 Sierra. You cannot get to the tabs from below like he states. To release them, you very carefully have to put a small flat blade between the upper and the lower edge of the grille and push the tabs down to release them. It looks to me as if all of the release tabs on his cover are gone. It seems that GMC has gone above and beyond to make this as difficult as possible.

Is really that simple

How does that work with a tow hitch?

Built not bought. Good on ya!

Extra parts means you made it better…

Don’t you have to have the front camera recalibrated now that you unplugged it.

Stack the old one on top of the new one with a custom bracket. Depending on where you live, a lot of metal shops will cut them for you. 4 or 5mm, foward sweep bracket should do the trick.

Thanks for the video

Headlights must not work

Do you have anything similar for the gen3 raptor?

A LITTLE DISAPPOINTED! I purchased these back up lights and the 40" Pro bar. I received them both today. Both lights were in the boxes and well packaged. The Quality is obviously noticeable. However, the hardware for both light kits were just taped to the boxes in several baggies with No identification on them. I had to sort which bolts went to which kits. Then I threw one of the bags away because it was stuck to the bottom of the shipping package. I installed the back up lights today but put the Pro bar aside for another day. Luckily I checked for the hardware. For this price and quality, the hardware should be all together and inside the respective light kits. As far as the install...again disappointed. I Watched all 4 videos of your Ranger Raptor products. When I go to install the Pro bar, I think it will go GREAT because your instructions are very thorough....NOT so much with the reverse kit. You video just starts with "Here is the bolt...." then you show the bracket already attached. You REALLY should indicate that it is VERY difficult to get these nuts and bolts tightened up because the spare and the driver side harness make it very difficult to reach. Even on the Pass. side once the bracket is on, it's hard to get your ratchet there to tighten. The same thing applies to the tightening up the assembled bracket with the nylon lined nut. The space is very difficult to navigate. ALso, you should leave the wires bare and just include the crimp pieces, so that we can slide an heat shrink tube over the connection. I just removed the and used my own connectors. NOW having said all that I am very please with the product itself and am very happy that you made these lights specifically for the Ranger Raptor. A+ for getting these to the market and having good quality. I cant wait to put the Pro Bar on it. Please let me know if you have some lights for the top of the Baja bar. Would also like some amber 3 lights for the top of the grille.

How hard would it be to tap the amber into your cars existing DRLs?

90,90…?

God I would love to be able to move the light bar to the bumper on my 04. The roof mount completely destroys the highway ride quality

Absolute garbage

Better then lambo

where do we buy the auxiliary wiring harness?

Good job!

It was factory. I’m thinking some kind of software connection but not 100% sure

I have a 2021. Is this a no go for this setup?

1:31 What is that wire with the loose ring connector?

Great video, fyi, if you are trying to take off the grill of a 5500, there are 7 screws that need to be loosen up underneath prior to removal.

Can you post a link were to buy them?

What a fckin great "single-man" email !!! That's next level!

Honestly looks lame as hell

Be grateful

Thank you. GM is so inept at helping customers with these questions

Awesome. What’s different about the OBW? Do you plan on making an OBW specific edition?

Hey Mike, can I get a direct link to these lights please?

Wowowowo🎉

That’s a lot of work for a light bar. Geez

Awe

What's the discount if you get the 40 and the ditch?

Seems like a lot of light bars support 12-60V on amazon to. Is there a case where we don't need the step down?

I doubt it!