Видео

Glad i could help! enjoy the seat. I have no complaints still to this day.

Thank you. I got mine from gear heart industries. It works really well

The seat is thinner and therfore sits you a few inches lower. As far as handle bar distance I don't remember noticing but I have 16" apes and I'm 6'

I have no complaints. I haven't taken as many long trips with it as I would have liked. When I did I couldn't complain. My longest rides around here are a few hours off and on at events and I still enjoy it very much

@@randellray Thank you for the prompt response!

@@edmignardot7888 no worries. Hope it helps

No full videos no. We had some family issues that put the airboat on the back burner. It was finished. There is a short clip at the end Ep24 of my workshop update. Shortly after it was finished we had motor trouble and it was pulled apart. We recently had a new motor put built. Just have to find the time to get her bolted on and going again

Looking forward to the finished product. Nice looking boat

Yeah, the seat is much slimer. If you get one I hope it helps. Mine did immensely however I don't take as many long trips as I'd like. But the 7hrs I was on it to key west really sealed the deal for me

It is Frogtape. Adhesive spray I use what I can get but usually it's either lock tight or Elmer's glue

Im not sure what was slapped. all the components are on standoff screws mounted to the desk

Yes i can see that, but hardly any cable management is in place which makes it look untidy. May aswell have used cheap wood and not gone to the lengths you did to make it to smooth and silky looking.

@@TheMattchooo ah I see. thank you for clarifying. Yeah it was my first pc build and that among several other things I feel like I could have done better with & will on the next one

@@randellray Yeah sorry dude, dont mean to be judgemental! if you can make a box underneath so you can put the PSU in and drill/cut holes either side of each connection point, you can massively minimise the cables on display and get rid of the unsightly PSU :)

@@TheMattchooo na don't apologize. Criticism is always welcome. I just misunderstood what you were referring to.

Using a program called easy poster printer. You can find it on the Microsoft store.

Thank you 👍

I'm down in naples. But ive been planning some longer rides. If I ever make it up that way I'll hit you up

@@randellray 👍

Yeah im aware. When building this I had very little experience with pc building. I leaned on someone who was more experienced. I've come to notice several things that were wrong or could have been done better 👍

@@randellray Still, the desk makes up for it, very nicely done.

@@ToothlessRaider thank you

Thank you. I use olson 45502 blades. I would start there. They are good all around blades and I use them for almost ever project using my scroll saw

@@randellray aww thanks for responding. I’ll definitely get some!

My build is about 8" deep. however once finished I decided to mount the GPU flat instead of sticking perpendicular to the Mobo. doing that if I you mounted top or bottom facing fans and a radiator you could go much smaller.

@@randellray would you say 5" for a GPU beside mobo is deep enough?

@@fabriciofernandes06 depending on how/where you mount fans Id think so yeah

@@randellray I already measure the fans and looks ok. Just need to measure the CPU fan. Do you mind telling me what do you use to turn on the PC (switch) and which gpu extended cable did you use?

@@fabriciofernandes06 give me a bit and ill check my amazon orders. i just used a generic cable that was the color i wanted. same for the pc I used a pc power button and mounted it under the desk and out of sight. something like this www.amazon.com/Desktop-Computer-Supply-Supplies-Button/dp/B01CJ44XZM/ref=sr_1_3?dchild=1&keywords=pc+power+button&qid=1601426353&sr=8-3

Heres a link to the ones I purchased.. you can find them on amazon as well for atound $50 www.jpcycles.com/product/913-459/avon-grips-chrome-air-cushion-spike-grips?gclsrc=aw.ds&&PLA-Avon%20Grips-Products&CjwKCAjwkJj6BRA-EiwA0ZVPVqpV-EsJkjT6UQTnaktfO9cSVr1ajpIHDIe7Dh33fPjnYd9bIi8sNRoCmtQQAvD_BwE&gclid=CjwKCAjwkJj6BRA-EiwA0ZVPVqpV-EsJkjT6UQTnaktfO9cSVr1ajpIHDIe7Dh33fPjnYd9bIi8sNRoCmtQQAvD_BwE

very cool. I did a simple Clint Eastwood Dirty Hairy cutout. It didnt turn out half bad

No, if anything it sits you slightly lower.

Thank you! 🤘🍻

this one was made with baltic plywood, 1/4" for the actual design and 1/2" for the backer. So far I have used a few different hardwood plywoods, & solid pine. I live in South Florida, Exotics and most hardwoods are harder to come by here so everything is shipped in and the prices can be ridiculous.

Thank you! I used some minwax datk walnut stain. Just something to darken things up a bit. That way if I had any gaps it would not be to much of a contrast.

I'm not sure. Its would be something I got royalty free. Ill look around after qork and see if I still have the project file and let you know

ruclips.net/video/pT4sAcJOXDA/видео.html here you go

Haha no worries man. Glad I could help

Thanks man. I love it

Hey, thank you!

I definitely havent regret the upgrade thats for sure haha. thanks man

Thanks for checking out the video

I regularly have back pain. This seems to support me the right way. Dont get me wrong after a whole day of riding you can tell but that's going to be the same all around

Ok cool man, thanks. Right now with my stock seat 30 minutes into the ride, I am done.

@@Jarhead6 yeah I've been there. I'm not an expert by far but this one seems to do the trick for me

I like it a lot. The longest trip I've taken straight was 7hrs or so. That's with fuel breaks and not much else. It is very comfortable for me and I'm a bigger guy. I was a little worried because it is stiffer then my stock seat.

Thank you, it is pretty user friendly. The ont thing that I think helped me a ton was to make sure i had good blades. Also remember that any mistakes you make can generally be hidden. You may know you made them but others wont have a clue 👍

Randell Ray Thanks! I did order some blades with it called the Flying Dutchman. I kept hearing good things about them.😁

I don't. I created it. Send me an email randellraulerson@gmail.com and if I have it saved I'll shoot it over

There also may be something a google search could pull up something close. A IG page sells stickers and such for that logo

@@randellray I’ll send you an email for the stencil !

just sent it over

Thank you very much!

Thank you!

Is*

Haha thanks Cassi! 🙃😂

Thanks man I appreciate that