Видео

Thanks a lot brother. Next video will be about TDS controller. Stay tuned.

@@diycheapperfect Thanks

This could be due to moisture in the switch, that dries up due to sun in the morning. So, the bell stops ringing in the morning. Thus, I'll suggest changing the bell switch. Thankyou very much for commenting. Hope this helps.

Yes, this objective can be achieved. Use color sensor to detect yellow colored objects, which will trigger the ESP32 CAM module to capture a photo of the object. But, lighting conditions can effect the color sensor, leading to false triggers. so you need to calibrate the color sensor accurately and also maintain the lighting at the exact same state like they were during the calibration process. Otherwise, white or orange or other similar color may also trigger the sensor. I also faced the same problem in some of my projects where indoor calibrated color sensor failed to work accurately in outdoor daylight conditions. So, I had to calibrate the color sensor in outdoor daylight to maintain its accuracy.

@@diycheapperfect Is there any online source or platform to obtain the code to attain this objective?

@@nihadhpk1237 You can get a basic working code of ESP32 and Color sensor from GitHub, but you have to twerk the code a little bit to achieve your objective. Also, you have to calibrate the color sensor by yourself because readily available calibration data will not work with your particular color sensor since all the color sensors are different from each other in terms of sensitivity, even though their model are same.

Thankyou very much for commenting. I hope this video helped.

Replacement cards are hard to find. I live in Delhi and I searched for this card in Bhagirath palace as well as in Nehru place, but only second hand cards were available costing around Rs. 500-700. I was unable to find the brand new replacement card from Cannon. I hope this helps. Thankyou very much for commenting and Sorry for late reply.

Count the number of blinks between two consecutive large breaks in blinking. This number will help to understand the problem better. Thankyou very much for commenting and Sorry for late reply.

If you have Inverter backup, then it will definitely work. But it will not work without power supply. Thankyou very much for commenting and Sorry for late reply.

This project involves development of mobile application on MIT app Inventor, where the app is developed by using code blocks, Pick and Place, and GUI. Therefore, a proper code for this application is not available. Thankyou very much for commenting and Sorry for late reply. ;-)

Your objective can be achieved. But you need to fabricate a special purpose frame to hold the bag on it and transfer the weight on the load cell. Thankyou very much for commenting and Sorry for late reply.

You can use a screwdriver to push the lock of door switch inwards, after which you can easily pull the door switch out. Thankyou very much for commenting and Sorry for late reply.

Thankyou very much dear. Your appreciation means a lot to small creators like me. Good wishes to you.

Thankyou very much dear. Your appreciation means a lot to small creators like me.

Thankyou very much dear. Your appreciation means a lot to small creators like me. Good wishes to you.

No, as of now I don't have any such video. But I'll surely make one in future. Thankyou very much for commenting and Sorry for late reply.

Sorry for being late. Have you calibrated the load cell using a known weight??

Count the number of blinks between two consecutive large breaks in blinking. This number will help to understand the problem better. Thankyou very much for commenting and Sorry for late reply.

As per the color sensor datasheet, Green photodiodes are activated when both S2 and S3 are set to HIGH. And I've also done the same. So, I request you to please elaborate the doubt, to let me clarify it further. Thankyou very much for commenting and Sorry for late reply.

Count the number of blinks between two consecutive large breaks in blinking. This number will help to understand the problem better. Thankyou very much for commenting and Sorry for late reply.

Thankyou very much dear. Your appreciation means a lot to small creators like me. Good wishes to you. Yes we can connect a RGB strip to ESP32 to change its color according to the color sensed by the color sensor. But for this, Addressable RGB LED's are required. :-) Sorry for late reply.

In my opinion Quick 858D is a better option as it offer more value for its price as compared to 8858D. Thankyou very much for commenting and Sorry for late reply.

Thankyou very much dear. Your appreciation means a lot to small creators like me. Good wishes to you.

Brother, I just purchased a small weight scale because, -- It had load cell and frame both include with it -- Also the cost of weight scale was Rs. 200 whereas, individual Load cell of same capacity was worth Rs. 260 Then I dismantled the weight scale and used it as per my requirements. Thankyou very much for commenting and Sorry for late reply.

Glad to know this brother. But I'll suggest using some adhesive like fevibond to make the speaker durable. Thankyou very much for commenting and Sorry for late reply.

7 months and counting, Electric tape is working perfectly. Ek baar poora tape ko change Kiya, wo bhi 2 mahino ke baad paat Gaya tha 😂. Thank you so much.

@@surajudoshi4762 Welcome brother.

Thanks for watching the video brother. can you please share the image of the spring on my email address - diycheapperfect@gmail.com Since there are many springs in a printer, I guess a conical spring is somewhat related to the encoder strip and cartridge positioning system in a printer. A pic of the spring will definitely help.

I have sent you the pic of the spring.

@@ABHIKRPD Up to what extent, did you disassembled your printer?? I mean what all parts did you opened? This spring does not looks like the encoder spring.

@@diycheapperfect Actually I opened the glass of the scanner and the CIS head.I only disassembled the CIS head and its cable

Thankyou for your feedback dear viewer. Mai aapko batana chahunga ki jab aapke ghar ke wiring me fault hota hai ya leakage current hota hai to new bell bhi theek se kaam nahi karti hai. Aisi condition me aapko yeh jugaad karna hi padega.

Ye to hoga

Load cell (Red) - - - HX711 (E+) Load cell (Black) - - - HX711 (E-) Load cell (Green) - - - HX711 (A+) Load cell (White) - - - HX711 (A-) Thankyou very much for commenting and Sorry for late reply.

Bhaiya yeh booster pump ki aawaj hoti hai. Normal hai, koi dikkat nahi hai agar paani sahi aa raha hai toh. Thankyou very much for commenting and Sorry for late reply.

Mai aapko delhi ke rates bata deta hu, CSM membrane - Rs. 650-700 Pre Filter - Rs. 50-100 Inline Filter set (3) - Rs. 300-450 Flow Restrictor - Rs. 20-30 Lekin aap jaha bhi rehete ho, waha par rates alag ho sakte hain. Aur agar aap kisi R.O. technician ko bulate ho to vo bhi aapse jada rates charge kar sakte hain including service charges. Thankyou very much for commenting and Sorry for late reply.

Bkl dhanda bamd karayaga ke😂😂

@@kabaddiplayers667 This is not my intention. The sole objective of my channel is to spread general awareness. Thanks for the humour.😅😅

Same problem

Bhai, speaker ke andar ek part hota hai "spider" jab vo fatt jata hai to distorted sound aati hai. Lekin speaker bahar se theek hi dikhta hai. Aise me speaker ko replace karna hi best option hota hai. Thankyou very much for commenting and Sorry for late reply.

Bhai, speaker ke andar ek part hota hai "spider" jab vo fatt jata hai to distorted sound aati hai. Lekin speaker bahar se theek hi dikhta hai. Aise me speaker ko replace karna hi best option hota hai. Thankyou very much for commenting and Sorry for late reply.

بھائی مجھے ایسی کوئی ریڈی میڈ ڈیوائس نہیں معلوم۔ اس لیے میں نے یہ سب کیا۔ تبصرہ کرنے کا بہت شکریہ اور دیر سے جواب دینے کے لیے معذرت۔

Bhaiya ji Meri shop nahi hai, yeh sab mai apne free time me ghar par hi karta hu. This is my hobby. Thankyou very much for commenting and Sorry for late reply.

Bhai possible hai ki aapke speaker ki maximum rated power aur amplifier ki output power different ho. Isliye aisa ho sakta hai. Thankyou very much for commenting and Sorry for late reply.

Yes you can use any load cell having the same Wheatstone configuration. In such a case, you have to calibrate the load cell and set the suitable scale in the ESP32 sketch. Additionally, I would like to inform you that the capacity and the resolution of a load cell are inversely proportional. So please choose a good average between these values as per your requirements. Thanks for watching, hope you liked the video.

Isko multimeter kehte hn. Aap chaho to continuity tester bhi use kar sakte ho.

Toh ek Tester ki help se open karo, aur sanitizer se saaf karlo. Fir isko acche se dry karke wapas assemble kar do. Tester, sanitizer aur brush to 100% hoga aapke paas. Thanks for watching and commenting. Hope you liked the video...

Hello dear, you have to calibrate the load cell and then set the suitable scale in your Arduino sketch to obtain the correct weight. For example, if without any weight, the reading is 80000 and with 1Kg of weight, the reading is 120000 the you can determine the scale of load cell as:- 1Kg = 120000 - 80000 (scale units) 1Kg = 40000 (scale units) scale = 1/40000 Thanks for watching and commenting. Hope you liked the video...

Bhai ji isme parts to koi lagna nahi hai, to jo bhi charges hai vo skills or tools ke liye hain. Mere opinion me 100 - 150 Rs. me ho jaana chahiye. Thanks for watching and commenting. Hope you liked the video...

I got the code from Github and changed it as per the pin configuration and load cell characteristics. You can get the code from video description or from this link - drive.google.com/file/d/1paqohZXeiytuj_yUkz9owikCjyujIDjH/view

@@diycheapperfect Thanks for the code bro

Thanks a lot dear. This means a lot to an emerging creator like me.

Electronic door bells are prone to leakage currents that are always present around us. So you can get your wiring corrected by a professional. Solenoid based ding-dong bells are a much better option to prevent automatic bell ringing. Thanks for watching dear. Hope you liked the video...

Filters ka size standard hota hai. Matlab ki aapke R.O. me koi bhi standard domestic R.O. filter kit aaram se lag jaaegi. To aap koi bhi online kit easily install karwa sakte ho, Lekin online products me quality issues ho sakte hn. So, be careful about the same. Thanks for watching. Hope you liked the video...

Bell ko circuit se alag karke direct ckeck kar lo. Agar direct lagane par bell sahi kaam kar rahi hai, to yeh aapke bell switch ya wiring ka fault ho sakta hai. Thanks for watching. Hope you liked the video...

Maine Bell ko hata krr wha pe led bulb lga dia or Bell puch button dabaya toh bulb jal rha h lekin Bell nhi on hoti push button ok h

Sabse phle aap yeh confirm karo ki aapki bell kisi normal socket me lagaane par sahi chal rahi hai. Iske baad aap bell push button ki suplly ko LED Bulb ki jagah 100Watt Incandescent bulb se check karo. Bas Yeh do kaam karne se aapko exact fault ka pata chal jaaega.

@@diycheapperfect normal socket me kaam kr rhi h

@@mohitsapna1997 iska matlab saaf hai ki aapke electrical wiring ya bell switch me problem hai. Mere opinion me aapke bell connection par proper current available nahi hai. Bell ke solenoid ko high current (~5Amps) chahiye isliye vo nahi chal rahi hai, lekin LED bulb work kar raha hai kyuki usko bohot kam current chahiye (~0.04 Amps only).

Yes, this can be done very easily. You'll need a Micro-SD Card module along with ESP32 to achieve the same. The voice notes of different colors will be stored in the card. Those can be played whenever a particular color is detected. Thanks for watching dear, hope you liked the video...