Видео

I'd love to get one, once they're openly available, seems like not quite there yet from the webpage

how to buy ?

I hope this laptop is yours and not someone else’s.

interesting product! i hope they can get some sales when it comes to market, and that they can eventually release it as open hardware i think its likely that cfws will write in some stuff for this device if it gets any traction how did you get this early board? are you in contact with the developer?

You've got a very calming voice bro. Kind of like Bob Ross, but with tech. Thank you! This was super stuff! 🤘

Upsream putty is for replacing thermal pads. On the 2 larger chips you should be using thermal paste like Arctic silver 5.

Искал видео-материал по сборке именно в этом корпусе и натыкаюсь на ваш канал. Вы Молодец и Красавица продолжайте и не останавливайтесь!!! 🙏🏻 (видел под другими роликами негативные комментарии дурачков которые умеюсь только быть токсиками, прикрывая при этом свой комплект неполноценности)

Thanks for posting this. I'm going through something similar with a 4090 having high hotspot temps and I ordered this putty in case the thermal pads need replacing. It is not easy to find the exact specs and diagrams online and very few go through the trouble fixing thermals let alone measuring. Sorry you had to go through all this but watching it gives me hope that I can be successful as well.

Mantenimiento al detalle 👏🏻

why you talk like a transgender?

What a shit video. Complaining and bitching.

Usually the gpu is the easy one to cool but the cpu is the hot one. I used noctua nth2 and the gpu was chill at around 74 degrees but the cpu went up to 100 degrees. I’m gonna try ptm next.

On laptop vram and vrms what to use bro pls tell me I own rog strix g15 For cpu i oredered liquid metal of thermal grizzly for gpu ordered thermal grizzly extreme For vram and vrms what to use som say pad and some paste Can iuse Arctic mx4 for vram and vrms pls reply

i liked this video. I loved the Open Hardware Monitor software, I dindt know it existed.

bro you just downgrade from liquid metal to regular thermal paste.

How many grams did you use?

Yeah, UX Pro is a little stiff compared to other options. The current best putties are Honeywell HT10000, Upsiren UTP-8, Fehonda LTP81 and Laird T-Putty 607, although I suspect Laird T-Putty 910 will be right up there with Honeywell HT10000, just hard to get T-Putty 910 currently as it is fairly new. UX Pro does work well in Videocards, but is too expensive if you ask me, and UTP-8 is slightly better, much softer, and much cheaper.

Thermalpad 0,5mm, thermal paste grizzly kryonaut extreme 14,2W/mk best paste for GPU

just use k5 pro, its the closest thing you can get to the factory blue stuff, for cpu use liquid metal and for gpu use MX6. MX4 is ok but it doesn't last that long on bare cpu/gpu die's as it pumps out due to its low viscosity.

клоун

Where did you purchase this from though?

I am also having issues with zephyrus m16. I should replace all cooling components. I am thinking replacing with 0.5 thermal pads. This is not user friendly at all from Asus.. Thanks for trying out! What happened actually when you launched with pads? did it turned off or temps were too high?

Thanks for making this video, I think it's fair to say this is quite a niche product and it's nice to see someone talking about it. I will probably pass for now, but I will be keeping an eye on the Pine products for sure! Love the idea of community-driven firmware

i like the black cover

TWS means "true wireless", but "tentalcles will spawn" is more fun c:

My Flipper Zero has died. I had it for about one year, scarcely used. I updated with custom but it was behaving a bit weird so I reinstalled with the official again and then it just died. It doesn't turn on and DFU mode does not work either. So I guess it is not about battery or damage in any other way... any ideas? I'll take it apart and check the battery, other than that I don't know... O_x

Did the same thing showing my kids,,love it,month later my son build me a cc1101 ,fatc that it look plaster job..but man it works like a charm ,ask how he did it n say I follow you,and added something new..finally something I can control when ever i want,, not!y fault that cybersercry can't be a!art enough to figure when u build something there's always a flaw..Other project use wifi sigma wit out connection or pass word, I can used any wifi free,, beautiful other is wifi is everywhere,but no password nothin can be done ,but lil signal Wii sends out a signal to let u know wifi is near that lil signal can amplify and use it to log in..sorry but not on GitHub,work in progress and getting better..pretty soon u will have to connect to any wifi...have fun...

How can i get this in india

Can someone please help me? When taking the back apart, I accidentally stripped the screws so I had to break the back shell off and while doing that I accidentally broke the back pins, am I able to reattach those somehow? Maybe heating up bottom of the pin and reattching it? The pins came of very cleanly, so I assume this is possible?

Solid video!

Trenton’s comment was deleted. So I’ll repost. Be careful. Watch at 5:50. You just about break a clip. This is not proper disassembly. I don’t want anyone to hurt their dolphin toy. Especially SE Black. 😢 I just missed the limited clear proto flippers. It cool tho. TAKE EVERYTHING APART. ALL OF IT. ITS YOURS. just be careful and don’t break clips homies.

Care to share where you got the strap from? Looks kind of handy not just for a flipper but for some other things I could really use a quick release strap on.

I broke it 😢

беспровод = кал

What are some of the benefits of being able to flash open source firmware on earbuds? I would love to see a project that works on more repairable earbuds I guess someone has built repairable cases for the airpods

Where can I get one of those beautiful wrist straps?

I just learned about these, was searching for reviews, and found yours and 2 others. I'm glad you think they sound kind of impressive, and it seems there's no extraordinary setup involved vs any commercial bluetooth earbuds. Yay Open Source! (P.S. I'm also thinking about the PineTab. Any thoughts?)

Thank you for your video

Or just use your nails

how did u get a black flipper zero?

I want to buy in india

Hi I have a dumb question my flipper zero has an SD card mount problem, whenever I try to insert the SD card it flashes a SD card mount error problem and I have tried different ways to mount it. Yet when I just barely just insert the SD card the flipoet zero says I should take a red pill and chill and it seems to work fine until I try and Click the card into place where again is flashes the mount error priblem is there any way to fix this problem and save the data it already has on the card? it is very frustrating. 🙁

all these tiktok script kiddies making videos about this. finally a real hacker that wants to open it and see how its made. thats the true hacker mentality

Watched at 2x speed and it was informative

Are you able to take off the speaker board without needing to spilt the 2 sides (the side with the screen, and the side with the buttons) I need to replace my speaker but don’t want to risk breaking it so much

Salad fingers anyone.. or rusty spoons

Looking for some insight, I opened mine but it was slightly difficult than usual and the result was those small antennas/pins (GPIO 17 for ibutton I think came off ) is it a simple solder or some type of glue?

Do you think that LCD can be replaced? my LCD broke completly. I am able to use it only with PC.

где можно купить все компонеты?

Could copy this & make this ?