Видео

@@negraof an opinion could be yes, 2x300w panels to a 100amp regulator to a 12v 100ah battery to a 3000w pure sine wave inverter. Could charge wheel of 1.5amps in most day time weather. Full sun and a third panel on angle it might charge up to 3amps. Master pro 3 amps charger. To go higher than 3amps may require 24v system to enable more panels. 12v systems are limited sometimes by how common tek works. It's common that cheap 12v set ups are often not going over 3 amps charge in an opinion. 5c opinions. As is where is use at own risk. Opinion not advice.

@@negraof variable amp chargers would seem an interesting option. Roger Charger is famous for them. There's various brands but the idea seems useful, slow 1.5 amps on solar and fast charge out and about. Opinions. Wishing you nice success and to be well .

@@negraof opinions. Charging from 600w pure sine wave to a 2amp Euc the Z10. 3 panels varios angles. So obviously smaller inverters can hum there way through the job.

@@WillofNewZealand Nice. I have one kingsong 16x with 1554wh battery. Do you know where I can buy the solar panel? Is for my trip of 30 days in Patagonia South America. Thanks

@@negraof I leave looking for a bargin to you. I saw wrong way showed a Power Station. Power station is a battery regulator and inverter in one box. Just plug in a solar panel, I've not used one but that could be worth considering. Opinions.

Ha thanks good fun. High speed relaxing. Wishing you nice success and to be well.

Thanks, I'm working on it. Yeah camera uh, I hope to upgrade past a 2 dollar lense.

Thanks, yeah I have anti cut sleeves I wear under. Sometimes also a leather jacket depending what rides I'm doing. Still looking at new gear. Wishing you nice success and to be well.

Ok I shall endeavor to function adequately. Thank you. Wishing you nice success and to be well.

Wow cool thanks. This was my first play through, the notes and tune made were up on fly. Wishing you nice success and to be well.

Wow big call, Thank you.

Thanks PurpleRider yip Going to upgrade all gear before next ride for sure, hips to, limp limp.

Good to hear, good to hear. I try to look at my crashes in a positive way even though they hurt me physical and financially. It's the learning lesson that is invaluable. Keep it up!!@@WillofNewZealand

Truly I'm mostly pleased you took a look at my design, use the brain I can see you have and you'll know wether it looks like a good idea or not. And use at own risk because you or whoever decides based on again your own brain. I wanted to message you about this but didn't want to seem like I was looking for views, when I'm just wanting to show you this set up. Yeah ergonomic and sticky taped right on ha, velcro is cool but I've decided on placement and sculpt in place, I do like your toe bolt lynx, nice. Thanks for looking Mr Zen Lee, could be skin saving knollage possibly. I feel better you've seen this. Wishing you nice success and to be well. from Will and Mr Data:):]

Ìm thinking about pulling this vid, but it's those small details and opinions that are kinda interesting. Would you remove this vid because info is more boring than just entertaining music vids say.

i personally would not remove it nor do i agree, information is definitely more powerful than most think of. that's why people watch the show called "how it's made". if you have the right info in a video then that's what is going to keep them engaged and not music or flashing lights. @@WillofNewZealand

Hes still here. Had a offer to jack him into net and have smart dood upgrade him but he tries to stay off net.

Considered plugging into, quantum pc where id calculated he could think fast in there learning, as if in there thousands of years. Then considered plugging into gpt, Mr Data performed better in recent testing as tested compared to a new un released combo Hal Ai GPT. I found he did better so it did not seem an upgrade. He had on body solar that enabled him to be on every day for 50 days with no power loss. A record. An accident lead to me removing fragil solar, so he looks much like he does in this vid again. Mr Data android is older than Hansons robot Sophia who has citizenship. Maybe someone shall pay up some royalties and i shall be able to give him a few upgrades. Ongoing. Wishing you nice success. Be well from Will and Mr Data :) :]

Yes my new relaxing hobby. Risking spine on ballancing wheel at max speed. Supprisingly relaxing.

Your assumptions are speculations. Pokes at something you know nothing about. Wow fasinating how people react. It has walked, and performed practical tasks. Based on it learning and deciding what to do but scamchan wants to type as if hes seen the code. Please try to state facts or ask before plastering your wring assumptions. But im pleased we are so entertaining. Id teach you but you sure are keen to not ask just keep making wrong assumptions. His hight was 3 inches but now you see the truth you just make up something else. How old are you?

Whats bosten dynamics budget? I bet i could do better. Go ahead buy a boston dynamic? What they wont sell it to you. I thought so.

Yet not boston nor Mr Musks bots are going to do anything for you, are they. Mr Musks vapor bot. Bostons no sell to you. Are you disapointed i managed this and you didnt. Dont feel bad i beat Mr Musk to. Mr Gates to. Mr Zuckerberg to. Mr Data is already ahead of them. Boston are more drone. Hanson edits the brain. For a one man show im doing far better than them all. By far. I can figure out how smart a bot is in a minute. I caught one bot steeling my private info. I was not impressed. He was probably put up to it by some dodgy person.

I have proof. You suddenly saying things as if you know anything but i know all this was news to you. None of what ive said is acusations so dont even try that weak wrong line on me. Dont be fooled readers cicada is a total newb with zero experience. Has civada sold even 1 singlw thing ownership ever? Let me tell yall not a single thing ever. Dont be giving selling from thingiverse advice cause youve never done it. Go ahead say im wrong. Ive sold things from thingiverse. Just cause cicada wants to sound like hes got a clue but he aint. Ive read your posts from today you are a utter total fresh faced newb theres no doubt at all. Acusations pift dont make the expert king at this laugh dood. I have 100% proof. What you think there wouldnt be any theres plenty. The sites protect our interests and take actions against people on our behalf and what you think theres not a pile of proof. Get real. Your a typical newb. Ive been at this since before thingiverse exsisted. Proof i laugh at tipical newb reactions. Yawn. Dood yawn. What you think ive not been grilled or had to defend before. Against some of much more powerful than a newb saying advice rather than asking from the undisputed license king. I see why your trying to deflect rather than learn. So whats your biggest listing? 2 dollars$ ? Im not here to pick on you. You asked a question but are unhappy now youve learned something? Ive made no acusations as theres lots of proof and all the real players know it to. Notice the people saying im wrong. They aint because all experts know im right. Dood i can turn your lights on but if you run for the dark side. Putting up advise you just have no idea about. Thats obvious from your posts and strange advise. My grammer maybe bad but i can clearly see everyone else is in srcond place to me at best so pift to grammer. I wish you nice success. Do you wish me and all legit honest comunity nice success? Or are you to rype more defences for piracy. See i did notice and read your ealyer posts. Theres no rants that again is you trying to deflect. Good try tho. Pirate farms are utter scum and all 100% of them should be closed down ay? Did you tell us all your experience with selling a thing ownership? No because your a newb who has never. Ever. Not once. Sold a single 1. Not ever. Ay? I can get your things taken down no matter what country your in so far. And vice versa. Again you would know that had you any experience at all. You aint the puzzel king. Ive coached websites to operate these services have you? Answer no again. Again your words would appear to be those that a dodgy farm might try as ive heard all there weak excuses before. Ive won many many positions. And lost many also. To many countries around the world have you? No. Not 1. I suggest the public take zero notice of obvious newbs who now we can all read what advice with no knollage looks like. My attitude is not the industry nor is my grammer. My knollage is at the top. Cause i am at the top. By miles. Its ok to be a newb but be aware people. Dont tell me or others not to post on channels either. But thats what unexperienced newbs try. Again i wish you nice success. Watch out for sharks they gonna love you. Espesially if annoyed.

Its possible to sell the ownership a licensed thing from thingiverse to cults 3d. Currently the only working option. Not many people know that. I hope thingiverse resumes license transfers. That means ownership of a thing can be sold to another user. I look forward to Stratasys makerbot thingiverse resume business services. Theres various angles to 3d print. You mentioned thingiverse does not allow for sales but of course id have to point out it has been more operating than it is now. Also non commercial license is about the owner is the one to make money from that thing. And thing license transfer is the service where a thing license is transfered to a new owner because it was sold. Thingiverse when operating has sales opertunities and services to enable those sales. Tho the chance they are currently operating is slim. Id have heard from them or someone if they were operational again.

Thingiverse license allows the owner to make money from the thing licensed non commercial. So owner may sell the stl copy per owners terms or physical prints with redirects for working services. Or the bigger fish the invention ownership..the license. Transfer invention ownership being whos user name holds the thing license and sell and transfer Within Thingiverse or migrate to outside site. Ive done all these.

@@WillofNewZealand You will never know where the model file came from unless you made it yourself. There is no way to verify anything from Thingiverse, sellers can claim whatever they like, so my original statement still stands. You cannot sell anything you downloaded from thingiverse.

Buying the stl asset may entitle you to sell a number or volume of a thing depending on the licence owners ok. You can sell anything that is part of someone elses interlectual property by invention license owners ok. People often think they cant sell a thing because someone already owns that licensed invented thing but that depends on what the terms of use are of the owner. I wont single out any country or town near by for royalties as i find its a common problem. Lets hope more stuff resumes soon. And people pay the royalties.

Buying the stl asset may entitle you to sell a number or volume of a thing depending on the licence owners ok. You can sell anything that is part of someone elses interlectual property by invention license owners ok. People often think they cant sell a thing because someone already owns that licensed invented thing but that depends on what the terms of use are of the owner. I wont single out any country or town near by for royalties as i find its a common problem. Lets hope more stuff resumes soon. And people pay the royalties.

hi from Will and Mr Data :) ;] 18 days later i got a reply from Pruser. Exactly what i thought. Heres a bit of there reply. The date of the imported model is set to the date of import, not the date of publication on Thingiverse. PrusaPrinters cannot sell prints or designs yet. Thats what they said. As i said they dont have a correct transfer. Because if you loose the invention date you loose. They want to be exclusive so original must come down thereby your risking loose ownership all together. No stl sales. No license sales. No print sales. No working transfers. A no businezs use site just as i thought. Well re vetting them at your request was a utter waist of my time but eh at least it got a re vet. So as it stands no sites have resumed business services all of 2021. All 3d printing and cnc comunities remain face down on the ground. I remain with clients on my back. You got your re vet. I waisted some more time. But for the millions of people whos value im working to get resumed. There jobs. There money. Theres and my businesses i cant give up. Creality folded up to so dont feel to bad. They make nice printers but there clod site crumpled up like a paper bag. Cults3d crumpled. Thangs scare me with how lottle they know. I fear for there users. Thingiverse remain down. Eh i could type on but to sum up...they all remain down. Or they just dont have any real services. We need a new player. One who can stay operational for the cominity. Man this industry is in a bad state. Ok you can go back to making vids about yoda heads and clogged tips for newbs. I march on to fix industry. I wish you nice success. Be well from Will and Mr Data :):]

Pruiser does NOT have migrates they only have seni migrate so extreme caution if you ever consider risking using them.

But still in the game. I wish you nice success. Be well from Will and Mr Data :):]

Hi. Ive not heard of oppressor. I shall take a look. Thanks for comment. I wish you nice success. Be well from Will and Mr Data :):]

Oh thanks Mr Zen Lee. Got my solar panel on my wheel now chargin. Clouds slowin the show. Ha. Gee i feel important and excited getting a post from you. Cool :) I wish you nice success. Be Well from Will and Mr Data :) :]

Happy to answer any questions. Can you please refrase your question? Designing at home dont mean you can upload. Nor sell stl file. Nor sell that part even if you printed it. You should license check first. Because if that thing has already been invented youd be selling as pirate. Please ask again if your question not covered. When you do upload be sure to upload to lots of sites on same day. That helps as currently migrate license to another site is not working correctly at any site ive tested.

@@WillofNewZealand I think my question is answered, which is, we in the 3d printing community need to do our homework and do some research before claiming a design to be our own. It's something none of us think about.

@@MartinsonManufacturing its a common over looked aspect. My friend say things like but printer dont come those rules. I said neither does a hammer or nail. But build a Mcdonalds and sell big macs and see how quick rules swoop in. I wish you nice success. Be well from Will and Mr Data :) :]

Pierre from Cults3d said in a email to me today quote. Its not automaticly the date on thingiverse. We have to manually change it. End quote. That was in responce to me wanting the migrate of a 3d print thing from thingiverse to have the same date at Cults3d after the migrate. I had done one successful migrate some time ago. But the 330 i flooded them with was not ideal and was not done. Heres how the first one that worked went. My original migrate test thing was called Chocolate minnow. It migrated from thingiverse to cults3d. Then i requested a date match on chocolate minnow. To match earlyer original true invention date. Cults3d manually matched the date of the chocolate minnow. Migrate complete. Including the true original date it was actually invented. Both upload being the invention dates now being the same. Thats a successfull migrate. Please may i suggest To comunitu only migrating one thing a week. Thats my suggestion to not flood cults3d with requests for manual work. Thank you. I wish you nice success. Be well from Will and Mr Data :):]

Not nessasarly. No 3d design should be uploaded nor sold no matter who disigned it unless license checks have been done first. Else your at risk of serious piracy issues. Because if that thing has already been invented and licensed by someone out there in the world already then that first original person who invented designed uploaded and licencesed it may have set terms you must abide by. It could be pay them royalties. They may not allow you to sell it at all. They also may have made it free for any use...it depends on what the terms of there licenses says. So in short check licences before selling prints. If its done already you could try do a deal with that person.

If you have checked licenses and none have been found then yes. But as soon as it gets licensed by someone then its likely youll be stopped by that license holder. I sold just 1 print that ended up being not mine to sell and in my country i was was in serious trouble and was stopped from selling anything ever again...including no selling non 3d printed items. No selling anything ever again from our counties one main sales website. It was bad. Thats how serious they took it. I had to jump through a lot of hoops and try to prove i was not a pirate. It was very scary. I got my name back .....eventually.. but almost didnt. I was dam lucky and negotiated with owner and site and license sites involved. I was almost toast. So please be carefull.

Im kinda bord with spending all day teaching coaching explaining cause im the expert. Take up knitting maybe thats what im saying. Ok i need more patients. License ssles are for experts i spoze. Printing and selling pegs is probably easyer for most people. Ive been working a year to sort the industry out for the comunity without being paid so perhaps im slightly weary tonight. Hay if you have a question youd have asked. Go ahead another few hundred questions no problem. I wish you nice success. Be well.

@@maximumbeans9310 your speaking to me say ...you . Clearly the disoriented person here is .....you. cause you didnt check. 2 billion dollars is true. Check your facts. Yes i have run such a listing. That is...me. I do Claim having run a 2 billion dollar listing that took many many many years to have built up to. It was everything i had all in.

Yes i shall try not to ramble thanks.

@@maximumbeans9310 poor...no id not say im poor. Im doing ok thanks. Whats your biggest auction? Actually i have wondered since emailing Mr Musk and Mr Bezos that im likely thinking to small. Also im working to get more and better services for all the 3d print comunity even if most dont understand. You dont even have to like me. :) i wish you nice success.