- Видео 3
- Просмотров 6 668
J-SPRAY AUTOMOTIVE PAINTING
США
Добавлен 19 май 2024
My Channel is all about automotive painting and spraygun reviews.
The Iwata Ws400 Series 1 vs the Iwata Ws400 Series 2 Battle!
The Iwata Ws400 Series 1 vs the Iwata Ws400 Series 2 Battle!
Просмотров: 3 988
Видео
The All New Sagola 4600 Digital Review
Просмотров 1,9 тыс.8 месяцев назад
A review of the All New Sagola 4600@J-SPRAYAUTOMOTIVEPAINTING
Does a series 1 cap and/or nozzle fit on a series 2? I have purchased a used ws 400 series 2 and the cap is damaged which cost 130€ in germany. So would like to change the ws-400-03 cap with a ws-400-01 series 1 cap.
@cheftipp i have used the series 1 cap on the series 2. I am pretty sure the fluid nozzle has different threads though. So if you have a series 1 cap you can try it on the series 2. It worked for me.
Have serial 2 digital for two weeks and at 2 bar always have 8 pattern. My serial 1 Mamba way better and I had my Mamba more than 5 years.
@walterwalters3069 That's great you have your setup you like. I really like both of the guns but I prefer the series 2. I have found I do not need to crank pressure to 2 bar. I usually spray mine at 1.6 to 1.8 bar. Thanks for commenting.
Sagola 4600 extreme with the clearcoat air cap
Can you use also for base?
@Stoiction They make a base cap that works great but if you needed to you could use the clear cap for base.
HI GOOD VIDEO THANKS FOR SHARING THAT INFORMATION WOULD YOU SAY ITS GOOD AS IWATT SERIES 2 1.3DH I HAVE THE SAGOLA EXTREME AQUA 4600 1.3 NON DIGITAL VERSION MY MATE SAID ANDY GET THE TITANIA PRO CAP 😉 YOU GET A LOVELY FINSH WHATS IT LIKE FOR BASE COAT PAINT SOLVENT WITH THE BLUE AQUA CAP 😊
Compared to the iwata series 2 1.3 hd? I would say the the Sagola is more of a production gun but can still put on a great finish. The Iwata series 2 is slower and puts on a little better finish. A lot of times the Iwata puts on too good of a finish for matching the original factory finish. So if I was doing show cars I would use the Iwata, production painting the Sagola. I haven't used the aqua cap, but the new Sagola black basecoat cap works great. I have a review coming out soon for the black basecoat cap.
@@J-SPRAYAUTOMOTIVEPAINTING so you would say if I have a bonnet to paint and a bumper used my new sagola 4600 1.3 NON DIGITAL VERSION and get the titania pro cap I have a new iwata series WS400 1.3 OBS BLUE CAP but never used it
@ANDY-we7mr the titania pro cap is great! Can't go wrong with that air cap. I had the obs 1.3 iwata series 2 for base but it was too slow for the basecoat I use. It depends on the basecoat. It sprayed fantastic with the previous basecoat I used.
Do some reviews on cheap guns
@@stonebruze1499 good suggestion! I will try
You ever notice the air cap holes on this clear pro cap matches the dv1 air cap
@EJ1James No, I didn't. Good observation though. They both atomize really nice.
I use the series 2 for clear and its a great gun i have the standard version so no digital gauge , i also have a sata x5500 and a devilbiss dv1 , and the iwata is the better gun and is actually cheaper atleast through the supplier i got it from
@@kevinhekers2380 Can't go wrong with the Iwata for sure !
That clear you are using is very liquid, to use 25 psi, my sr2 I use it at least 33psi to 35psi to obtain a mirror result, if I use less than 30 psi, the result is orange peel. I use clear coat hs and uhs, with the uhs I use a little more pressure
The clear was really nice at 25 psi but if I wanted it to be more mirror like I would definitely raise the pressure up a little. The pressure was really good to match the finish of the car. You are right though if you wanted it to lay really glass like definitely would have put it up to around 30 psi.Thanks for the comment!
@@J-SPRAYAUTOMOTIVEPAINTING Now, to simulate the original finish with the micro orange peel if that pressure is good, in my case I do more custom work, than original finishes, so I use more pressure to achieve the mirror finish 😁
@@J-SPRAYAUTOMOTIVEPAINTING That gun has 3 and a half turns maximum of fan, I use it with only 2 turns, and the material if I use it open completely, the work pace is a little faster than normal 😊
@@mundotuningcustompaint3488 That's awesome! I love a fast gun.
@mundotuningcustompaint3488 There definitely isn't one way to use a spray gun and everyone one uses there's differently. That's what makes it enjoyable for me.
Series 2 is way better love that gun.
Your test proves absolutely nothing, except that series 1 can work at a lower operating pressure than series 2. The narrow pattern in the middle clearly shows that the pressure is higher than necessary. The pressure you chose (25 psi) is not any "magic" pressure, but only the one that is predicted for the normal operation of the series 2. This does not prove that the series 1 is bad, on the contrary, it could be said that according to that criterion series 1 is better than series 2, because it can achieve the same result with the use of lower pressure, as well as a slightly smaller amount of compressed air (expressed in cfm). Paint guns are not tested in this way, because the results obtained are not authoritative. You can't compare "apples and oranges" as they say. Better come up with a real test, which will be a real indicator of the quality of these paint guns. One of the criteria can be the result they achieve, and then compare what were the necessary prerequisites for achieving the same result. Then you compare those conditions (working pressure, air consumption, paint consumption, distance from the surface you are painting, etc.). The way it was done seems unprofessional, even from an amateur's point of view.
Thanks for the reply, I paint all day every day and have used these guns extensively. They both work great at lower pressure but the series 1 can only go so low for pressure and still atomize the clear. They are both fantastic spray guns. In my opinion they perform the same but the series 2 is more refined. This is only my opinion and to me I would recommend the series 2. Thanks for commenting!
Let me know if you ever have a video of your testing methods and would love to watch!
Nice video! How much does one of those bad boys cost new? $500, $1000, $1500?
The series one is around 450-500. The series 2 is around 900-1000 😮
@J-SPRAYAUTOMOTIVEPAINTING whoa!
@@J-SPRAYAUTOMOTIVEPAINTING 450-500? where at? Because im seeing it for high $600-$700
You are referring to the series 1 right?@latinprince896
@latinprince896 check out sp supplies series 2 is on sale series 1 is sold out right now
Great video! Whats the best clear coat gun for home hobbyists? Sata cc?
If you have the budget for a Sata CC you can't go wrong. Especially if you are painting small to medium size parts.
You got my name 😮😮
What reduction % and what reducer?
The clear coat was cc200 10% US4 reducer uh80 hardener
Super Soaker. Lol
That would be very interesting to watch😂
Iwata ws400 series 2
That's also a great spray gun
How about iwata supernova series 1? Isit good for clear coat
Series 1 is good 2
Very good spray gun!@@sanjusuresh4699
Very good video!
Thanks!
Cool! 😎
Thanks!
Dude awesome video! 😎 -Juice
Thanks, had to make a video on such a great gun!
Love the Video! Makes me want one of these guns!
It is a great spray gun! I've had a ton of them and this is one of the best!