VFX Tuts with Dan
VFX Tuts with Dan
  • Видео 136
  • Просмотров 525 108

Видео

Installing pocket fender flares on a Tacoma. Will the long bed version work on a short bed?
Просмотров 58Месяц назад
As I continue to find budget options for my 2nd gen. Tacoma, this time, I try out new fender flares. You can find a set for this model of Tacoma for just over $100, but they are all for the long or 6-foot bed. If you have a double cab like me, your bed is most likely the short or 5-foot one. Are the wheel wells the same? Will this work? If you need the short answer, no they don't. There is enou...
Photoshop Tutorial - Compositing 3D Rendered Assets
Просмотров 133 месяца назад
In this video, I show the best ways to composite a 3D rendered object into a photographic plate with Photoshop. I use Smart Objects as much as I can as working non-destructively is always a good idea.
Upgrading side mirror turn signals on an '08 Nissan Altima - Don't risk it!
Просмотров 4514 месяца назад
There are some cool upgrades out there for the side mirror turn signals on the Altima. They have really bright LEDs and have a cool sequential blink. I tried three of them, buying from Amazon and ebay. The awful truth is that they are all the same and they don't fit! I was so disappointed and the whole process ended up with me breaking a mirror and having to replace the entire thing. Watch and ...
My 2008 Altima has crashed. It's finally repaired. Part 10
Просмотров 134 месяца назад
It's finally fixed and almost back to normal. Most of the repair work wasn't too bad, but I did need some experienced help in a few areas. Here are the final costs to take care of everything: Replacement parts including bulbs: $854 Non-OEM aftermarket accessories: $89 Wiring labor: $150 And then there's the issue with the traffic citations I got for the original crash. I did get one dropped and...
My 2008 Altima has crashed. Replacing the door lock cylinder. Part 9
Просмотров 284 месяца назад
I was reluctant to do this, but at least I pulled out the lock cylinder from my original driver's side door. But the more I thought about it, the more I thought I should replace the current lock cylinder so at least my key would work on the new door. The battery is going to die some day, right? So this is an important step, but be forewarned, it's not easy, at least it wasn't for me. Part 10: r...
My 2008 Altima has crashed. Repairing the headlight wiring. Part 8
Просмотров 225 месяцев назад
In one of the worst issues resulting from the crash, many wires in the wiring loom to the headlights and associated front lights were severed. I've got to figure out this mess and solder them back together. It didn't seem too bad at first, but I ended up with only one low beam and one high beam working. In trying to figure this out, I find out that each headlight bulb has its own fuse. I also l...
My 2008 Altima has crashed. Mudflaps? Part 7
Просмотров 55 месяцев назад
The donor car at the salvage yard had these extra little things on the edge of the fender. I didn't know what they were, but I took them off anyway. Even though they don't look like it to me, Nissan calls them mudflaps and they match the body color. My car didn't have them, but I show how to install them, even if they don't come on your car. Now if only I had thought to check on the back of the...
My 2008 Altima has crashed. Replacing the fender. Part 6
Просмотров 466 месяцев назад
It's time to get the replacement fender on. I thought it would be an easy job, but it turned out to more difficult than I had expected. And as usual, a weird problem popped up. Part 7: ruclips.net/video/1y6OdXya3vs/видео.html
My 2008 Altima has crashed. Replacing the hood and bumper. Part 5
Просмотров 266 месяцев назад
Now it's time to replace my dented hood with a nice, new one. This is the easiest part of the process. And while I'm at it, I replace the internal bumper. Quick and easy. If only the whole process were this way. Part 6: ruclips.net/video/8EZ6WdrwDTY/видео.html
My 2008 Altima has crashed. Replacing one door might not be enough. Part 4
Просмотров 216 месяцев назад
My replacement door, even though it was from an '07, had some upgrades: turn signal indicators on the mirrors and an auto down button for the passenger window. Will they work on my car? Replacing a door is easy, so should I get the front passenger door as well? Watch to find out. Part 5: ruclips.net/video/AhO2fCIjgR0/видео.html
My 2008 Altima has crashed. Fixing the radiator mount with epoxy. Part 3
Просмотров 86 месяцев назад
The impact cracked the radiator core support and rather than try and replace it with a new or donor one, I decided to epoxy it back together, especially since it was only damaged in a small area. Part 4: ruclips.net/video/9l1vnIh8QOc/видео.html
My 2008 Altima has crashed. Welding was required. Part 2
Просмотров 146 месяцев назад
The left support for the radiator was really dented in by the crash. The only real option here was to remove and replace it with a good one. The problem was that in addition to being bolted in, it is also welded. Attacking this area was beyond my skills, so I had an experienced friend help with some bending, grinding, and welding. Did it work? Watch to find out. Part 3: ruclips.net/video/0rIrEW...
Upgrading the front speakers on my 2nd gen Tacoma
Просмотров 3,4 тыс.6 месяцев назад
In this video, I finally get around to replacing the factory speakers on my 2009 Tacoma. It's pretty easy if you get the right components. There are other good videos out there on replacing the speakers on a Tacoma, so I won't go into too much detail there, so it will be more of a comparison of the OEM speakers vs. aftermarket. Here's what I used: Kicker 6.9 speakers and install kit: www.amazon...
My 2008 Altima has crashed. Can I fix it myself? Part 1
Просмотров 386 месяцев назад
Driving on a rainy freeway, I lost control, spun out, and crashed into the median. Luckily (although I don't feel lucky) no one else was involved and there was no other damage. The damage mainly to the body, but for a car of this age, it didn't have collision insurance. It's a great car and I really like it, so can I fix it so that I can drive it again? Can I get it back to normal? Could you do...
Installing an extended magazine release on a 1911
Просмотров 3216 месяцев назад
Installing an extended magazine release on a 1911
Using touch up pens to paint gun sights
Просмотров 6106 месяцев назад
Using touch up pens to paint gun sights
5 to 9
Просмотров 129 месяцев назад
5 to 9
Night Cat
Просмотров 639 месяцев назад
Night Cat
To the Moon and Back
Просмотров 209 месяцев назад
To the Moon and Back
A Short by Lauren Bolnik
Просмотров 179 месяцев назад
A Short by Lauren Bolnik
Photoshop Tutorial - illustrating hard surface objects. Part 2 - combining vector and raster layers
Просмотров 1411 месяцев назад
Photoshop Tutorial - illustrating hard surface objects. Part 2 - combining vector and raster layers
Photoshop Tutorial - illustrating hard surface objects. Part 1 - using vector shapes
Просмотров 3011 месяцев назад
Photoshop Tutorial - illustrating hard surface objects. Part 1 - using vector shapes
Looking for a better quality window ventvisor for my '08 Nissan Altima
Просмотров 1111 месяцев назад
Looking for a better quality window ventvisor for my '08 Nissan Altima
Replacing the alternator on an '07-'12 Nissan Altima - What you really need to know
Просмотров 2,1 тыс.11 месяцев назад
Replacing the alternator on an '07-'12 Nissan Altima - What you really need to know
Budget stereo for the Tacoma - Dual XDVD251BT or XDVD276BT part 3 (or will it be a Jensen?)
Просмотров 251Год назад
Budget stereo for the Tacoma - Dual XDVD251BT or XDVD276BT part 3 (or will it be a Jensen?)
Taste-testing common fast food hamburgers (part 2)
Просмотров 32Год назад
Taste-testing common fast food hamburgers (part 2)
Replacing the center storage cubby in a 2008 Nissan Altima
Просмотров 1,2 тыс.Год назад
Replacing the center storage cubby in a 2008 Nissan Altima
Taste-testing common fast food hamburgers
Просмотров 289Год назад
Taste-testing common fast food hamburgers
Replacing seats in a 2008 Nissan Altima - part 2
Просмотров 581Год назад
Replacing seats in a 2008 Nissan Altima - part 2

Комментарии

  • @clintonjewell7115
    @clintonjewell7115 3 дня назад

    Too much talk

  • @luisl.5304
    @luisl.5304 3 дня назад

    I'm having trouble with the horn staying on. 1994 mitsubishi mighty max. Doesn't have horn relay and fuses are good. Any suggestions?

  • @domingomarques8712
    @domingomarques8712 4 дня назад

    You can just replace the bulb with a led one and done

  • @Mindyownbznz-dm4xe
    @Mindyownbznz-dm4xe 13 дней назад

    Thanks for showing me how to fully take this apart and put it back together dick

  • @michaelhodges8312
    @michaelhodges8312 14 дней назад

    Nice holster! I also purchased the “1942 Tanker” Holster with matching dual mag carrier from El Paso Saddlery for my Tisas. US Army.

  • @michaelpcoffee
    @michaelpcoffee 14 дней назад

    I think the 'I didn't fire the gun' defense was a sort of 'hail mary' just trying to play the odds. I think he did just like actors always do under instructions from their director; the difference being that the crew had provided him with a prop gun that was loaded with live ammunition.

  • @SanDiego_VDubLife
    @SanDiego_VDubLife 23 дня назад

    how did it sound? Was a better sound? That stock speaker was scary. I don't even think it had a magnet on the back. The stock tweeter had a bigger magnet than the 6x9! I have a set of new speakers but have been avoiding putting them in. I need to get on it.

    • @vfxtutswithdan1893
      @vfxtutswithdan1893 14 дней назад

      I did my best to show that in my video, but yes, noticeably better. Upgrading the tweeters was also a good idea.

  • @elgauchocharrua
    @elgauchocharrua 27 дней назад

    I just did the same swap on my 2008. Took out manual seat (broken) and put in powered one. Same set up as your car. Same two connectors as you and mine worked perfectly. I don't think those are connectors on the motors. Could be your motors are blown

    • @vfxtutswithdan1893
      @vfxtutswithdan1893 14 дней назад

      Weird. Something is off here. I guess that could be true, but I've seen a wiring harness specifically for the powered seat. There aren't that many connectors under the seat and the airbags and seatbelt need to be powered.

    • @elgauchocharrua
      @elgauchocharrua 14 дней назад

      @vfxtutswithdan1893 Strange. I had ordered a manual one from the scrap yard. They put it in the back of my truck so I didn't look at it closely. When I got home I noticed it was a powered one so I was going to return it the next day. As I had already removed the manual one I noticed both seats had the same two connectors so I gave it a shot and it worked. Mine is a 2008 "S" trim with the 3.5.

  • @benjaminanthony5201
    @benjaminanthony5201 27 дней назад

    I have some on my 2013 f-150

  • @bingostar9207
    @bingostar9207 28 дней назад

    The other end of that tool might be for pushing your take down pin out?

  • @elgauchocharrua
    @elgauchocharrua 28 дней назад

    I have the same problem. Did you check if there was a fuse for the power seats?

    • @vfxtutswithdan1893
      @vfxtutswithdan1893 14 дней назад

      I looked into it quite a bit and my conclusion was that if the car didn't come with the powered driver's seat, it doesn't have the required wiring to power the seat.

  • @michaelbattista1334
    @michaelbattista1334 Месяц назад

    My Springfield slide stopped sliding back after the last round so I ordered the Wilson Combat extended slide release and should be getting it in a few days. Some reviews I read people were saying that it just fit right in there guns out of the box. We shall see what happens.

  • @ghostgaming7448
    @ghostgaming7448 Месяц назад

    Does it glow in dark

  • @Grizzlyman420
    @Grizzlyman420 2 месяца назад

    TISAS makes the best 1911 on the market. Yeah you can go out and spend 2-5 grand on a Wilson combat or something but why? My TISAS A1 with Wilson combat mags runs better than most 1000$+ 1911

  • @LindaSchmal
    @LindaSchmal 2 месяца назад

    How to unlock the mount to adjust the bar length???

  • @davedeady5828
    @davedeady5828 2 месяца назад

    Liberals buy guns??

  • @shirleybargeman4484
    @shirleybargeman4484 2 месяца назад

    Martinez Michelle Anderson Maria White Christopher

  • @denalidude
    @denalidude 2 месяца назад

    Who makes this version ?

  • @charlieyanez9839
    @charlieyanez9839 2 месяца назад

    I replaced the bulb on the fog light switch, but it is always illuminated when the lights are on. No on/off with switch on or off. Not exactly what I wanted.

  • @Grad3r
    @Grad3r 2 месяца назад

    Any idea which bulb to use in emergency light button?

  • @stangd1
    @stangd1 2 месяца назад

    Same here can't thank you enough 2 years later your video just helped me appreciate you and others like you God bless 🙏

  • @wesslieoyola3405
    @wesslieoyola3405 2 месяца назад

    Solid tutorial and also sick inclinometer you have there. Can you share or do a video on it?? Pls

  • @larryvaladezvaladez2860
    @larryvaladezvaladez2860 2 месяца назад

    Tisas 1911 45 than clock gun fact

  • @scoophouser
    @scoophouser 2 месяца назад

    I was really hoping this video went over the part about how the switch it mounted..

  • @bigmovesmeditationmotivati1518
    @bigmovesmeditationmotivati1518 3 месяца назад

    Dude ur me in 20 years

  • @oceanavenue1470
    @oceanavenue1470 3 месяца назад

    No one posts motor size

    • @MontexansHomestead
      @MontexansHomestead 3 месяца назад

      That's the 4 cylinder.

    • @vfxtutswithdan1893
      @vfxtutswithdan1893 Месяц назад

      You are right. Sorry, I missed that point. I guess it would be different for the V6.

  • @erjaime1971
    @erjaime1971 3 месяца назад

    White first. Then the green or red and the colors will show better. Just my experience.

    • @vfxtutswithdan1893
      @vfxtutswithdan1893 Месяц назад

      @@erjaime1971 Thanks. Good idea. The green does pretty well by itself.

  • @AlShams69
    @AlShams69 3 месяца назад

    I can’t thank you enough for this video bro

  • @AlShams69
    @AlShams69 3 месяца назад

    Great video bro you saved me

  • @SpeedGraphicsTV
    @SpeedGraphicsTV 3 месяца назад

    Ah a fellow musician. I see a trend with "guns and guitars" Thanks for the vid!!

  • @proximaparada_music
    @proximaparada_music 3 месяца назад

    Thank you so much for sharing this tutorial!! Super helpful!

  • @judger9941
    @judger9941 3 месяца назад

    Can you please link were you got each product

  • @Roypantera
    @Roypantera 4 месяца назад

    My wires out of my truck are Green Green white stripe Dark Grey white stripe Lite Grey white stripe Wires on my switch from the Top are Red Green Yellow Black Pls help yota brothasss thx

  • @successwinner009
    @successwinner009 4 месяца назад

    Sir what if we connect both red wire (Parking & Trigger) in Ignition ???

  • @Huntinghair
    @Huntinghair 4 месяца назад

    Nice video! Looks like the modification isn't that difficult, and your mod in the end came out quite nice looking. Congrats! ^_^

    • @vfxtutswithdan1893
      @vfxtutswithdan1893 14 дней назад

      Anything I do is going to be pretty easy and simple.

  • @joshuahawkins2743
    @joshuahawkins2743 4 месяца назад

    Aiming really isnt a issue with a shotgun if your experienced point and shoot

    • @vfxtutswithdan1893
      @vfxtutswithdan1893 14 дней назад

      Great point. I've also seen enough instructional videos and experienced myself that good aiming is also necessary.

  • @JohnDoe-zg6fn
    @JohnDoe-zg6fn 4 месяца назад

    👍🏽👍🏽

  • @GearJamminHank
    @GearJamminHank 4 месяца назад

    Why do I hear Ron Swanson? 😂😂😂

  • @rubixfilms687
    @rubixfilms687 5 месяцев назад

    Great review and great handgun. Also has anyone ever told you that you sound just like George Lucas 😂

    • @vfxtutswithdan1893
      @vfxtutswithdan1893 14 дней назад

      So many times...

    • @rubixfilms687
      @rubixfilms687 14 дней назад

      @vfxtutswithdan1893 Well, I appreciate the review. I actually have this on layaway at my local shop. Can't wait to get it!

  • @alexanderscott353
    @alexanderscott353 5 месяцев назад

    Just picked up my first shotgunlast weekend, and it looks like you and I are on the same page for reasonably budgeted accessories. I really appreciate your candid reasoning on why you chose to add or omit certain upgrades on your Maverick 88. 5 years after your post, we're still saying "Thank You"!

  • @jyothikarnavar
    @jyothikarnavar 5 месяцев назад

    Thanks for the video man 😍... I bought 3 of these switches to Dubai from ali express for my Toyota fortuner in India. Eager to see if the wiring will work correctly for me...🤞

  • @eleonacaliao
    @eleonacaliao 5 месяцев назад

    what if it doesnt show the red target

    • @Sbuder_man
      @Sbuder_man 4 месяца назад

      Something I was wondering also

    • @vfxtutswithdan1893
      @vfxtutswithdan1893 14 дней назад

      You would need to re-track. Something's not right if you don't see the target.

  • @MGrayl-ib5fo
    @MGrayl-ib5fo 5 месяцев назад

    Rotobrush SUCKS!!! I spent ages letting it track (and corrected as it went along), finished the clip & then went to freeze it & it started wandering off everywhere! Useless. I lost a day doing this when I could have done it manually in half the time. Dreadful.

  • @ironmaxima3672
    @ironmaxima3672 5 месяцев назад

    Nice watch! Where did you get that?

  • @quantumrift11
    @quantumrift11 5 месяцев назад

    I wonder what putting 2, 3, 4 of these in tandem would do for the volume. I also wonder if you could wrap something, clamp something, add weight to one or two of the horns to change the tone of each. I wonder if you left them all the same if they would cancel one another out. Or if you'd have to face in opposing directions, or if it would matter. I just know if you have 2 of the same speaker driver too close, it'll actually be quieter due to nulling. But I don't know how that would work here. For the price, it would be nice to buy 2 for 60 and have it be like this but x2. But I'm also driving a little chevy cruze so we will have to see if 1 even fits anywhere discrete let alone 2-3 😁

  • @donniejobe5662
    @donniejobe5662 5 месяцев назад

    Great pistols.

  • @SilasScott-wi5ut
    @SilasScott-wi5ut 5 месяцев назад

    Youve got a $1000 defense system there ,that practically anybody could fend off a serious attack with, regardless of their experience. Fir less than $300. Thats the goal 🎯🤙

  • @lmalesci
    @lmalesci 6 месяцев назад

    Best regards from Italy, Florence and I, for my Suzuki Jimny 4x4 truck with a 1.3 lt gasoline m13a engine from 2001, I have 4 all-terrain Hankook dynapro atf RF 10 m+s tires in size 205-70-15 and I have a train of retreaded mud tires from the Italian brand ziarelli modello mud Power ziarelli MT 205-70-15 m+s !! (I am undecided between the two models of Kumho tires, the Kumho at 51 models and the other model the Kumho at 52, always in size 205-70-15!)

    • @vfxtutswithdan1893
      @vfxtutswithdan1893 14 дней назад

      Great to hear from Italia! There are so many vehicles in Europe and other parts of the world I'd love to get my hands on.

  • @FrankKenney-cj1tv
    @FrankKenney-cj1tv 6 месяцев назад

    What tweeters are those again?

    • @vfxtutswithdan1893
      @vfxtutswithdan1893 5 месяцев назад

      www.amazon.com/dp/B091Z1X27C?psc=1&ref=ppx_yo2ov_dt_b_product_details

  • @randyscreen3435
    @randyscreen3435 6 месяцев назад

    where did you get the a/c control knobs?

    • @vfxtutswithdan1893
      @vfxtutswithdan1893 5 месяцев назад

      www.tacomalifestyle.com/products/ajt-design-toyota-tundra-climate-knobs?variant=43504390045939&currency=USD&gadid=&gad_source=1&gclid=CjwKCAjw4ri0BhAvEiwA8oo6FzHOFfP5XLCvYgZIdXjWN0QK3GnNJc1kI6vcGC1MVaXeZqH_gKqcYRoCRXkQAvD_BwE