Видео

Thank you ;-)

merci Henry, wenn Du das sagst ein wahre Freude ;-) Deine Arbeiten sind immer sehr realistisch :-)

Interessantes Video von Deiner Seite Henry... ich lerne das Problem gibt es schon länger... Danke und wie heisst es so schön selbst ist der Mann oder die Frau 😊 herzlichen Gruss Christoph

es gibt nur einen Minidurchgangsbahnhof auf ferner Strecke.... aber eine Drehscheibe in der Nähe der Kohleverlade... sende Dir eine WA Info ;-)

thank you for your comment. I drilled a hole in the bottom (not shown in this video ;-) ) to allow the draining of water out of the wok... the wok/turntable will be placed in a bed of stones levelled to the main track outdoor not in a shed...

thank you ;-)

thank you again ;-)

Yes ... thank you

Erst mal testen auf Terrassenoval und den eidgenössischen Fahrtüchtigkeitsausweis erhalten... 😊 herzlichen Gruss Christoph

@@cschaefer3826 Du kannst die Lok ja mitnehmen und fahren lassen, wenn Du mal hier bist...

Danke Henry schön von Dir das zu hören :-) schöne Sunntig!

hat es schon siehe separates Video... vollautomatisch :-)

thank you... it will work good luck :-)

thank you. It is a two tube design I developed during my vacation in greece at the beach (a bit boring only sun)... see this special video ruclips.net/video/WBVqkxo2ceM/видео.htmlOne bigger big brass tube contains a smaller brass tube with wholes at the bottom (they are silver soldered to a brass base plate).... the water runs from the top into the center One which contains special fabrics which binds oil as a filter and the water flows at the bottom of the center One to the outer tube where it goes finally back to the hot sink... the fabric is taken out after a while and may be burned in the coal fire... To your first Question where to by phosphate or soda... unfortunately I cannot open this questio or read it fully... please ask again sorry ;)

The HotRC www.aliexpress.com/w/wholesale-hotrc.html?spm=a2g0o.store_pc_promotion.search.0 Herzlichen Gruss Christoph

Thank you very much indeed :-)

I asked Steven Spielberg to improve the video, no response yet ;-)

Thank you...! I am retired so I have some time :-)

thank you :-)))

thank you!... I found the brass shells in a lamp shop in the US... they are used to cover the electricity connection at the roof of the room... but I bought them 15 years ago

@@The123pcrThank You! Would be awesome to hawe a funtional watertower for my old Bowmans and the B&L! Not as nice as Your locomotive, but at least they run on watermist... ha ha

Salute Henry... fast... ich schaufel per Hand...schaue bitte das nächste Video :-))) Herzlichen Gruss Christoph

no problem a lot of oel and steam... ;-)

na Deine Seite auch , subscribed :-)

Thank you!

Thank you ;-)

danke Henry, ich habe mit 18 Jahren solche Radstände in Brandenburg (damals DDR) (mit Freuenden und Tages-Visum) morgens um 4 Uhr bei minus 15 Grad fotografiert, da gab es keine Handwärmer etc. sondern Slivowitz :-)))) man war der schlecht und uns danach!!!

thank you :-))))

Adam no problem, what is your question I may help you in this chat... you print the text on a laser printer on glossy paper in reverse mirror style, than you cut the printed paper out and tape the inverted text print on a piece of brass, than you iron it from the paper site with highest temperature for at least 2 minutes down to the brass. Let it cool down and drop it in water with some dish washer detergent. rub careful the soaked paper with your finger and a brush away. Paint the back of the brass with some color to prevent the etching from the backsite. Place the printed brass in minimal amount of water and add the Fe-III-Chlorid etching reagent (wear glasses and gloves!!!) Waith for hours at room temperature or warm it even up to 30 degrees to speed up the process and check time by time the process of the etching on the surface to see if the 3D pattern is formed. I leave it even sometime over night at room temperature. Stop the process by changing to clean water and wipe the colores and laserprint pattern with aceton away. Sand it with highest grain 600 or even polish afterwards... The lower metal levels etched deep into the brass may be filled by thinned paint or darkened by selected (Brünierung/german word)... Done and I hope it help you kind regards Christoph

@@The123pcr you've just redefined "over and above expectations" - thank you!! Meanwhile, the easy way to maximize readability (at the expense of aesthetics) is to use a sans-serif body (not display) font, you've got the size about right, go with fairly dark colour (black is easiest) but add a 1px white outline so the eye can pick it out no matter the background. If your tools can do it (rare) the 1px outline can be an XOR or NOT of the background, or even a custom gradient map - that makes the outline much more pleasing but is a @#$!-load of work. This is an area where art and function are directly opposed. Or just do it white-on-black at the bottom like closed-captioning. I never thought I'd say this in this life, but some of the TTS (text to speech, aka "AI voice") engines are now reasonably good and could be used here. Actually... you could just do a literal CC track, and add a splash screen at the start letting viewers know, then the appearance is under the, er, "listener's" control. I have a hearing impairment and a particular interest in typefaces - I've spent a LOT of time thinking about and working on different modalities of information presentation, hopefully something in here was helpful.

Ja danke ;-) Gute Frage, ganz einfach, der Stellhebel (1.6 mm Loch im Gestänge) wird über den Schwingarm gesteckt (1,6 mm Stahlstift im Schwingarm fest nach oben stehend (4mm hoch)). Da geht nichts raus denn von oben liegt satt der Deckel drauf, kein entkommen des Gestänges. Nur so kann ich alles verbinden, denn auch das Dampfeifenventilgestänge muss ja, allerdings direkt am Servo verschraubt werden, geht alles erstaunlich gut, vielleicht etwas fummelig.

Na dann rate mal Henry von wem ich inspiriert wurde, von Deinem tollen Wasserwagen. Ein Traum ist Deiner. Ich habe meinen in ANlehnung an Deinen gebaut etwas bulliger und zum Anschluss an die Kolb Lok ;-) Danke Dir!

@@The123pcr Ja gerne, ich freue mich darüber. Ich hatte durchsichtigen Silikonschlauch genommen um die Funktion des Durchflusses zu sehen. Da kann jede Luftblase bei dem geringen Wasserdruck ein Hindernis sein. Ich puste manchmal in der Tankwagen, um den Durchfluss zu steigern und löse vorher hnter der Dampfspiesepumge die Scbraubverbindung und warte das es dort heraus spritzt. Dann läuft es super.

Top Idee werde ich auch so machen Danke!@@BKB-Henry

Danke Henry :-)))) das sagt auch meine Frau :-))))

Thank you :-)

will come

black 6mm polyethylen plate... it fits in the sliding gap of the window

thank you and it was build from zero... it took y 5 years... a lot of nights... :-)

Power adapter Input 110-240V and Output 12V and 5000mA (ok, I installed some LEDs more). Be aware that the maschine is driven by a higher voltage than the Original Astro version (9V) in order to get a higher response rate of the bumpers... I measured 13.1V at the Output with my PoppStar Universal AC Adapter. Be careful the voltage of 12V may be to high for long term usage. The polarity of the plug is important, Minus Center/ Pos Outside... unusual! All the informations are at your own risk and I take no responsibility ;-)

@@The123pcr thanks