um with this video its totally useless and with step by step commentary which that would help others would be helpful . this vide is pointless to learn its sped up to fast and to hard to follow i just gave up in the end redo it .
There should be a way to place 4 equal length lines to the center of each exhaust manifold port, lock the lines’ length, attach it to the center of each exhaust port (firing order) and tell A.I. to “give it a desired diameter without touching other primaries”.
You're a fusion boss.. RE just doing the fillet on the flange.. took me a moment to work out how you selected all of the outside edges, by using the selection filter on just edges, but select through, and then used the intersecting selection window. i have learned something thank-you!
iI seems like you are using random radius bends to construct the runners.. you can only manufacture from set radius bends especially when fabricating a turbo manifold like this as you would usually be working with schedule pipe cast elbows which only come in 2 or 3 set radius for any given diameter.
He does use a set radius for the bends, 47,5mm centerline radius is about right for a 36mm elbow. You can see him setting up a parameter to constrain the radius in the beginning of the video (4:15). What I'd do however is I'd also make it so that the elbows and straight pieces intersect at either a 45 or a 90 degree angle as often as possible, just to make the fabrication process a bit easier
@@filipprucnal One thing I was also wondering (as someone who would like to try out fabing a manifold, out of curiosity and to practice), how would you determine if that radius is correct? I understand that there are limitations to materials used, OD and wall thickness, but does it matter for example when you have a tube bender and do your own bends? Is it just for the sake of simplicity? And one more thing, how would you accomplish making sure that the pipes would intersect at ony 45 or 90 degs? That would indeed make it much much simpler to fab. Thanks :)
I think I’ve watched this about 10 times fully through & still have no god damn idea how you do half of what you do😂 appreciate you putting this out man it’s helped me tons already & I learn more every time I come back lol
I'm not sure if I was able to see it or not because of the zoom, but how do you know they're equal length? Was that just by measuring each segment in the sketches and putting them together?
I want to do something very similar for my Pajero, but I can't find the collector flange for it.. do you have time to (and feel like) helping me out? I already modeled the flanges for the exhaust/turbo and put them in the right place in space...
Can anyone who has figured this out record a commentary?
great work
How are you selecting two lines and then putting a circle on that plane?
Drawing a circle tangent to 2 edges I think- but even slowed down its difficult to follow!
how did you make sure that all the pipes where equal length?
that's what i was wondering also
um with this video its totally useless and with step by step commentary which that would help others would be helpful . this vide is pointless to learn its sped up to fast and to hard to follow i just gave up in the end redo it .
it aint no tutorial
Awesome work mate!!
thanks for that, i was trying to make something like that for long time and i have no idea how to do it
There should be a way to place 4 equal length lines to the center of each exhaust manifold port, lock the lines’ length, attach it to the center of each exhaust port (firing order) and tell A.I. to “give it a desired diameter without touching other primaries”.
You're a fusion boss.. RE just doing the fillet on the flange.. took me a moment to work out how you selected all of the outside edges, by using the selection filter on just edges, but select through, and then used the intersecting selection window. i have learned something thank-you!
is there a file we can access for the collector?
iI seems like you are using random radius bends to construct the runners.. you can only manufacture from set radius bends especially when fabricating a turbo manifold like this as you would usually be working with schedule pipe cast elbows which only come in 2 or 3 set radius for any given diameter.
He does use a set radius for the bends, 47,5mm centerline radius is about right for a 36mm elbow. You can see him setting up a parameter to constrain the radius in the beginning of the video (4:15). What I'd do however is I'd also make it so that the elbows and straight pieces intersect at either a 45 or a 90 degree angle as often as possible, just to make the fabrication process a bit easier
@@filipprucnal One thing I was also wondering (as someone who would like to try out fabing a manifold, out of curiosity and to practice), how would you determine if that radius is correct? I understand that there are limitations to materials used, OD and wall thickness, but does it matter for example when you have a tube bender and do your own bends? Is it just for the sake of simplicity? And one more thing, how would you accomplish making sure that the pipes would intersect at ony 45 or 90 degs? That would indeed make it much much simpler to fab. Thanks :)
Is this file anywhere?
Is there a video on desiging the merge collector itself?
he is able to do sketch in the air wtf
it is called 3d sketch, its located in your sketch palette
Any chance of getting some commentary/notes on the tools you're using at various steps in f360?
I think I’ve watched this about 10 times fully through & still have no god damn idea how you do half of what you do😂 appreciate you putting this out man it’s helped me tons already & I learn more every time I come back lol
I'm just now seeing this but check my channel it might help!
I want this video but in solidworks.
I'm not sure if I was able to see it or not because of the zoom, but how do you know they're equal length? Was that just by measuring each segment in the sketches and putting them together?
I used the addon mST SketchTools, which allows you to directly measure the length of a chain.
Look at 17:00
I want to do something very similar for my Pajero, but I can't find the collector flange for it.. do you have time to (and feel like) helping me out? I already modeled the flanges for the exhaust/turbo and put them in the right place in space...