Geekworm
Geekworm
  • Видео 109
  • Просмотров 1 013 587
How to DIY Your IP-KVM via KVM-A3 Kit for Raspberry Pi 4 ? (Updated)
This the latest installation guide for KVM-A3 kit, as internal products are upgraded, the installation steps are different now!
Update:
1. X630-A3 has been updated from V1.2, V1.3, V1.5 to V1.6 in October 2023.
2. The X630-A3 only has 3 on-board nut standoffs, only need to use 3pcs screws to fix X630 above X630-A5.
3. KVM-A3 is only compatiblie with PiKVM V3 Platform OS, not support PiKVM V4 Plus & V4 Mini platform.
User Manual and FAQ: wiki.geekworm.com/KVM-A3
Aliexpress Shop: www.aliexpress.com/item/1005004451752086.html
Geekworm Official: geekworm.com/products/pikvm-a3
Просмотров: 1 379

Видео

How to Install X1300+X1300 A2+X1300-C1 Case?
Просмотров 2413 месяца назад
Installation Guide for X1300 X1300 A2 X1300-C1 Case, The X1300 HDMI to CSI-2 bridge with I2S audio interface has been specifically designed for the Raspberry Pi 5. It features the Toshiba TC358743XBG bridge chip, supporting HDMI input up to 1080P at a refresh rate of 60 fps. WiKi: wiki.geekworm.com/X1300 wiki.geekworm.com/X1300-A2
How to Install the X1005 PCIe to Bottom Dual NVMe SSD Shield with P580-V2 Case for Raspberry Pi 5?
Просмотров 2,3 тыс.4 месяца назад
This is the installation guide for Raspberry Pi 5 X1005 P580-V2 Active Cooler. X1005 NVMe dual SSD shiel is designed to provide a seamless and high-speed storage solution for your Raspberry Pi 5. Its sleek and compact design enables easy attachment of two M.2 SSDs with multiple lengths (including 2280, 2260, 2242, and 2230) to your Raspberry Pi 5. With its PCIe 2.0 interface, you can experience...
How to Install the Orange Pi 5 Pro/Orange Pi 5 Max Metal Case N515?
Просмотров 2,1 тыс.5 месяцев назад
This is a metal case specially designed for Orange Pi 5 Pro motherboard, we name it as N515. It is also support Orange Pi 5 Max installation. Since N515 was released before Orange Pi 5 Max, the CPU cooler in N515 is slightly smaller when used in Orange Pi 5 Max. User Manual: wiki.geekworm.com/N515
How to Install the X1100 2.5" SATA HDD/SSD Shield & X1100-C1 Case for Raspberry Pi 5?
Просмотров 5525 месяцев назад
The X1100 shield is a 2.5 inch SATA HDD/SSD expansion board, offering an easy and fast way to create bigger storage solution for your Raspberry Pi 5. Its elegant and ultra-compact design allows 2.5" HDD/SSD to be conveniently attached to Raspberry Pi. The SuperSpeed USB 3.0 port delivers a blistering data transfer rate of up to 5Gbps, letting you transfer a large amount of data in seconds. User...
How to Install the X1011 PCIe to Four NVMe SSD Board with X1011-C1 Case for Raspberry Pi 5?
Просмотров 1,4 тыс.6 месяцев назад
The X1011 four M.2 NVMe SSD shield, designed to provide a mass-capacity storage and high-speed storage solution with four full-size M.2 2280 SSDs to your Raspberry Pi 5. With its PCIe 2.0 interface, you can experience data transfer rates of up to 5Gbps, allowing you to effortlessly transfer large amounts of data within seconds. User Manual: wiki.geekworm.com/X1011 Where to Purchase: Official Si...
How to Install Raspberry Pi 5 & X1202 UPS & X1202-C1 Metal Case?
Просмотров 2,2 тыс.6 месяцев назад
This X1202 is an ultra-compact advanced uninterruptible power supply expansion board designed specifically for the Raspberry Pi 5.With its advanced features and robust power backup capabilities, the X1202 is perfect for even the most demanding Raspberry Pi setups. User Manual: wiki.geekworm.com/X1202 Where to Purchase: Official site: geekworm.com/products/x1202 Aliexpress: www.aliexpress.com//i...
How to Install Raspberry Pi 5 & X1201 UPS & X1201-C1 Metal Case?
Просмотров 2,1 тыс.6 месяцев назад
X1201 is an innovative uninterruptible power supply (UPS) expansion board designed specifically for the Raspberry Pi 5. With its advanced features and robust power backup capabilities, the X1201 is perfect for even the most demanding Raspberry Pi setups. User Manual: wiki.geekworm.com/X1201 Where to Purchase: Official site: geekworm.com/products/x1201 Aliexpress: www.aliexpress.com//item/325680...
How to Install Raspberry Pi 5 & X1200 UPS & X1200-C1 Metal Case?
Просмотров 8226 месяцев назад
X1200 is an innovative uninterruptible power supply (UPS) expansion board designed specifically for the Raspberry Pi 5. With its advanced features and robust power backup capabilities, the X1200 is perfect for even the most demanding Raspberry Pi setups. User Manual: wiki.geekworm.com/X1200 Where to Purchase: Official site: geekworm.com/products/x1200 Aliexpress: www.aliexpress.com//item/325680...
How to Install the X1004 PCIe to Dual NVMe SSD Board with P579-V2 Case for Raspberry Pi 5?
Просмотров 1,8 тыс.6 месяцев назад
Introducing the X1004 NVMe dual SSD shield, designed to provide a seamless and high-speed storage solution for your Raspberry Pi 5. Its sleek and compact design enables easy attachment of two full-size M.2 2280 SSDs to your Raspberry Pi 5. With its PCIe 2.0 interface, you can experience data transfer rates of up to 5Gbps, allowing you to effortlessly transfer large amounts of data within second...
How to Install the X1000 PCIe M.2 Key-M NVMe SSD Board with P579 Case for Raspberry Pi 5?
Просмотров 3056 месяцев назад
The X1000 shield is an NVMe M2 2242 SSD PIP (PCIe Peripheral Board) for the Raspberry Pi 5 that uses the new PCIe interface of the Raspberry Pi 5 to utilise the NVMe M2 SSD for fast data transfers and ultra-fast booting. User Manual: wiki.geekworm.com/X1000 Where to Purchase: Official Site: geekworm.com/products/x1000 Aliexpress: www.aliexpress.com//item/3256806141486377.html
How to Install the X1003 PCIe M.2 Key-M NVMe SSD Board with P579 Case for Raspberry Pi 5?
Просмотров 4946 месяцев назад
The X1003 now has been updated with blue FFC cable, but still have some sotck with yellow FFC cable at amazon shop. User Manual: wiki.geekworm.com/X1003 Where to Purchase: Official Site: geekworm.com/products/x1003 Aliexpress: www.aliexpress.com//item/3256806271814253.html
How to Install the X1002 Pcie NVMe SSD Bottom Board with P580 Metal Case for Raspberry Pi 5?
Просмотров 2 тыс.8 месяцев назад
The X1002 shield is a bottom NVMe M2 2280 SSD PIP (PCIe Peripheral Board) for the Raspberry Pi 5 that uses the new PCIE interface of the Raspberry Pi 5 to utilise the NVME M2 SSDs for fast data transfers and ultra-fast booting. User Manual: wiki.geekworm.com/X1002
How to Install the X1001 Pcie M.2 Key-M NVMe SSD Board with P579 Case for Raspberry Pi 5?
Просмотров 6 тыс.10 месяцев назад
Which NVMe drives work with a Raspberry Pi 5? Please refer to video: ruclips.net/video/3mUgVTBmKio/видео.html User Manual: wiki.geekworm.com/X1001 X1001 Software Guide: wiki.geekworm.com/NVMe_SSD_boot_with_the_Raspberry_Pi_5 Where to Purchase: Official Site: geekworm.com/products/x1001 Aliexpress: www.aliexpress.com//item/3256806125760282.html/ AM-US: www.amazon.com/dp/B0CPPGGDQT AM-JP: www.ama...
How to Install the Raspberry Pi 5 Heavy-duty Case P573?
Просмотров 2,4 тыс.Год назад
Installation Guide for Raspberry Pi 5 Case P573 User Manual: wiki.geekworm.com/P573 Where to Purchase: Aliexpress shop:www.aliexpress.com/item/1005006273970250.html Official website: geekworm.com/products/p573 Amazon shop: geekworm.com/pages/amazon-shop
How to Install Raspberry Pi 5 Armor Case with Dual Fan P511-B?
Просмотров 2,2 тыс.Год назад
How to Install Raspberry Pi 5 Armor Case with Dual Fan P511-B?
How to Install the Raspberry Pi 5 Armor Case P122-C?
Просмотров 875Год назад
How to Install the Raspberry Pi 5 Armor Case P122-C?
How to Install Raspberry Pi 5 Armor Case with Fan P511-A?
Просмотров 1,5 тыс.Год назад
How to Install Raspberry Pi 5 Armor Case with Fan P511-A?
How to Install the Orange Pi Zero 3 Case N502?
Просмотров 2,3 тыс.Год назад
How to Install the Orange Pi Zero 3 Case N502?
How to DIY Your IP-KVM Via X652 PoE&NVMe SSD supported for Raspberry Pi CM4 Open-source KVM Over IP?
Просмотров 1,4 тыс.Год назад
How to DIY Your IP-KVM Via X652 PoE&NVMe SSD supported for Raspberry Pi CM4 Open-source KVM Over IP?
P170-B Case Installation for Libre Computer Board AMl-S905X-CC/ALL-H3-CC/ROC-RK3328-CC
Просмотров 465Год назад
P170-B Case Installation for Libre Computer Board AMl-S905X-CC/ALL-H3-CC/ROC-RK3328-CC
How to Install the Orange Pi 3B Metal Case N510?
Просмотров 1,5 тыс.Год назад
How to Install the Orange Pi 3B Metal Case N510?
How to Install New KVM-A4 V2.0 KVM-Over-IP Kit for Raspberry Pi Zero 2W?
Просмотров 2,8 тыс.Год назад
How to Install New KVM-A4 V2.0 KVM-Over-IP Kit for Raspberry Pi Zero 2W?
How to Install the Raspberry Pi 3B+/3B Case P252?
Просмотров 1,3 тыс.Год назад
How to Install the Raspberry Pi 3B /3B Case P252?
How to DIY your IP-KVM via X680 4-port IP KVM Switch for Raspberry Pi CM4?
Просмотров 3,8 тыс.Год назад
How to DIY your IP-KVM via X680 4-port IP KVM Switch for Raspberry Pi CM4?
How to Install the NASPi CM4-M2 and NASPi CM4-2.5 for Raspberry Pi CM4?
Просмотров 1,1 тыс.Год назад
How to Install the NASPi CM4-M2 and NASPi CM4-2.5 for Raspberry Pi CM4?
How to Install the N508 Case for Orange Pi 5 Plus?
Просмотров 2,9 тыс.Год назад
How to Install the N508 Case for Orange Pi 5 Plus?
How to Install the Orange Pi 5 Pus Aluminum Heatsinks?
Просмотров 2,1 тыс.Год назад
How to Install the Orange Pi 5 Pus Aluminum Heatsinks?
How to DIY Your IP-KVM Via X650 for Raspberry Pi CM4 Open-source KVM Over IP?
Просмотров 3,3 тыс.Год назад
How to DIY Your IP-KVM Via X650 for Raspberry Pi CM4 Open-source KVM Over IP?
How to Install the N506 Case for Orange Pi 5/5B?
Просмотров 1,2 тыс.Год назад
How to Install the N506 Case for Orange Pi 5/5B?

Комментарии

  • @pixelbabygamer
    @pixelbabygamer 6 дней назад

    Awesome, good ups

  • @ilyska1977
    @ilyska1977 20 дней назад

    Should have warned me not to switch it on before understanding how to connect to a computer, install software, and the safe shut down script. Now I have to leave it on to do all these steps and it didn't even come with a mini/HDMI adapter so I literally have no idea what to do with this little machine running while I figure out a way to do this...

  • @jubio12
    @jubio12 Месяц назад

    Wondering if anyone has got and succesfully used the PI KVM with the Zero 2w? I have 2 running with Rasp pi 4s and have a Pi 3 and Pi Zero W 2 I couldnt get working but I done have the x630-A4 and A5. only the X630

  • @giuliospinelli6958
    @giuliospinelli6958 Месяц назад

    assembled the HW , CR1220 battery plugged in, powered on. No DIsplay . Have I to upload any SW ? Your video it is not showing it

    • @Geekworm
      @Geekworm Месяц назад

      Hi,Yes, please refer to wiki: wiki.geekworm.com/KVM-A3#User_Manual

  • @user.A9
    @user.A9 Месяц назад

    Hardware for 2230?

    • @Geekworm
      @Geekworm Месяц назад

      Yes, the X1000 can support M.2 Key-M NVMe SSD 2230 length.

    • @user.A9
      @user.A9 Месяц назад

      @@Geekworm There is no hardware included to do that.

    • @Geekworm
      @Geekworm 21 день назад

      @@user.A9 Yes, not included, you can use this FFC kit which include the hardware can help solve the issue.geekworm.com/products/ffcs

    • @user.A9
      @user.A9 21 день назад

      @ it should have been included. Also, only one of 4 nvme that I have would work and the one that worked would not reboot without unplugging the power. I had to add a capacitor to the 3.3 volt regulator. Now I have 2 that boot, reboot and work reliably. The other two will boot to the desktop and then crash randomly. They work fine on x86 windows and Linux, but not on the x1000.

  • @MrGPVIDEO
    @MrGPVIDEO Месяц назад

    Can’t believe I forgot to order the CR1220 battery, right before thanksgiving.

    • @Geekworm
      @Geekworm Месяц назад

      Wishing you a joyful and abundant Thanksgiving filled with happiness, gratitude, and cherished moments with loved ones!

    • @MrGPVIDEO
      @MrGPVIDEO Месяц назад

      @@Geekworm Thank you, I bought a battery and it arrived this morning. I assembled the whole device but the rear display isn't showing anything. What step could have caused the display to not post?

    • @Geekworm
      @Geekworm Месяц назад

      @@MrGPVIDEO Hi, Please use PiKVM OS V3 Pre-Assembled version, the OLED configuration is already pre-installed, you don't need to configure the OLED, refer to: wiki.geekworm.com/KVM-A3#Enable_OLED_display

  • @Geekworm
    @Geekworm Месяц назад

    We have updated new installation video for KVM-A3, please refer to: ruclips.net/video/WPGH-rrt10E/видео.html

  • @j.w.grayson6937
    @j.w.grayson6937 Месяц назад

    I am really curious how the metal case affect WiFi speeds!!

  • @FernandoMondragonJackZerox
    @FernandoMondragonJackZerox Месяц назад

    I want to activate Raid1 to my hdd wiich have already data and I got a new disk to make the mirror, its possible? what will be the best way to activate without lose my data?

  • @diegosolo5
    @diegosolo5 Месяц назад

    It just can't be that hard to know what batteries I should buy. Can we have the exact scpecs or a list of compatible models? I don't have availability, locally, of the two models you suggest in your website.

    • @adrianTNT
      @adrianTNT 15 дней назад

      They are 18650, from the video it looks like the "flat head" ones (without bump at "+" side). They are very common but as an altenative, you might find them from broken electric scooter batteries, most electric scooter packs have 18650 inside. Capacities are up to around 2700mah, anything above that is more likely to be fake specs and lower quality. These are in Tesla cars too, one model has 7104 of these inside 😁👌

  • @alphaomega5017
    @alphaomega5017 Месяц назад

    Appreciate if a case is provided with the package/kit

  • @andreyshkuratov8045
    @andreyshkuratov8045 Месяц назад

    Is it aluminium or stainless steel case?

    • @Geekworm
      @Geekworm Месяц назад

      Hi, it is iron case.

  • @RickyResell
    @RickyResell 2 месяца назад

    Where did you get the 5x30mm screws and nylon columns I can't seem to find them on amazon

    • @Geekworm
      @Geekworm 2 месяца назад

      Hi, the nylon columns comes from the X1200-C1 metal case! We get them in China!

  • @veloaddict
    @veloaddict 2 месяца назад

    Can you make a video with the x728 ups on top of the x1004 with 2 drives and the pi5?

  • @adrianTNT
    @adrianTNT 2 месяца назад

    What is the maximum TB capacity per SSD with current adapter / firmware ? I think last time I checked there was a 2TB limit. Does it work with 4TB SSD ?

    • @Geekworm
      @Geekworm 2 месяца назад

      Hi, the SSD capacity is actually no limit, but related with the OS you use!

  • @barmus7620
    @barmus7620 2 месяца назад

    what is the diameter of the screws?

    • @Geekworm
      @Geekworm 2 месяца назад

      Hi, it is the M2.5 screws

  • @solomonshv
    @solomonshv 3 месяца назад

    where does the LED screen go?

    • @Geekworm
      @Geekworm 2 месяца назад

      Hi, KVM-A8 itself does not provide OLED assembly, because it is a PCIe version and is installed inside the chassis, so OLED is not necessary. We put an OLED inside to facilitate some customers to debug or DIY. You can completely ignore it. Our installation video does not mention it either.

  • @BlackBeardJH
    @BlackBeardJH 3 месяца назад

    sould better specify the front panel pinout exactly. It's confusing as hell.

    • @markjones2349
      @markjones2349 3 месяца назад

      Shows right on the small directions that come with it. Looks something like pwr, rst, hled, pled. If the LEDs dont light up then just invert the cable. Pretty simple.

  • @Eddie-u9f
    @Eddie-u9f 3 месяца назад

    I'll pray for you to get some wifi signal

    • @Geekworm
      @Geekworm 2 месяца назад

      Hi, it is the truth that the metal case will shield the wifi signal! Please use ethernet if possible!

  • @batata_bajji
    @batata_bajji 3 месяца назад

    The front panel USB and power buttons will no longer work after installing this hardware?

    • @markjones2349
      @markjones2349 3 месяца назад

      The big black 2x4 pin headers are for connecting to the front panel buttons and LEDs. One group of pins goes to the front panel and the other group goes back to the motherboard front panel header. Yes you can still use the buttons on the PC case perfectly fine. The internal USB header is to power the actual pi and the external power is to power the "hat" that comes with the kit. As long as you have more than just a single USB header on your motherboard then you will still keep the front USB functional.

  • @PiDsPagePrototypes
    @PiDsPagePrototypes 3 месяца назад

    I have the previous version. Geekworm needs to do a step-by-step guide on turning on the I2S audio in the Pi. Could get the vision, easy, but the audio, NEVER.

    • @Geekworm
      @Geekworm 2 месяца назад

      Hi, to use the audio function, you will need to connect the 10pin I2S audio cable,if use the X1300, you will need to use with X1300-A2 to get the audio function.

    • @PiDsPagePrototypes
      @PiDsPagePrototypes 2 месяца назад

      @@Geekworm Also, 2 weeks to reply to comments, is second rate customer support. There's never been any reply to questions on the X630 pages on the Geekworm Wiki.

    • @PiDsPagePrototypes
      @PiDsPagePrototypes 2 месяца назад

      @@Geekworm I have the X630, X630-A2, X630-C1 - NONE of the guides show how to set up the OPERATING SYSTEM to get the I2S Turned ON. Hardware assembly is done. HDMI Vision is working. Sound Is Not because there's no information on how to turn it on published.

    • @Geekworm
      @Geekworm 2 месяца назад

      @@PiDsPagePrototypes Hi, you can attach your order number and questions to contact us via email, thanks! We will help you via email.

    • @PiDsPagePrototypes
      @PiDsPagePrototypes 2 месяца назад

      @@Geekworm Ahhh, the 'not gonna answer, answer'. Sure, I'll dig it out and send an email. but that doesn't change that none of your documentation includes any information of getting the I2S port to function in the Operating System.

  • @asgarkhan1209
    @asgarkhan1209 3 месяца назад

    👍👍👍👍👍

  • @queen6201998
    @queen6201998 4 месяца назад

    Geekworm is from China in the usa it's no Thing as a Tuf gaming it's just in China

  • @nagantm441
    @nagantm441 4 месяца назад

    Can confirm that poe is broken on this, only reason to get this over the x650 is the option for using an m.2 drive.

  • @Ashtzaph
    @Ashtzaph 4 месяца назад

    How much does it last on batteries? Approximately? Idle or low usage

  • @fiveaboy
    @fiveaboy 4 месяца назад

    Do we have to install pikvm software or is it already on it

    • @Geekworm
      @Geekworm 4 месяца назад

      Hi, you need to install the PiKVM OS yourself.

  • @TechbrainBrainz
    @TechbrainBrainz 4 месяца назад

    Uninterruptible Power Supply UPS HAT (B) for Raspberry Pi i need case that suitable can u suggest.

  • @nagantm441
    @nagantm441 4 месяца назад

    What pikvm image is recommended for this?

    • @kevinherzig8421
      @kevinherzig8421 7 дней назад

      I wish someone had answered this. The documentation on this device is abysmal.

    • @nagantm441
      @nagantm441 7 дней назад

      @kevinherzig8421 it's v3

  • @crazyhenk
    @crazyhenk 4 месяца назад

    Please link all the products in the description ❤

    • @Geekworm
      @Geekworm 4 месяца назад

      Hi, updated!

  • @RiggityWRECKED
    @RiggityWRECKED 5 месяцев назад

    Bought one of these the other day and it was delivered a few hours ago. It's up-and-running in my home server right now! :)

  • @work5-vs9zv
    @work5-vs9zv 5 месяцев назад

    Great product!

  • @nagantm441
    @nagantm441 5 месяцев назад

    Does the x652 still have PoE compatibility issues?

    • @Geekworm
      @Geekworm 5 месяцев назад

      Hi, yes, please refer to: wiki.geekworm.com/X652, the X652 v1.0 version is still in stock.

    • @nagantm441
      @nagantm441 5 месяцев назад

      @@Geekworm are you going to release a v2.0 that resolves that?

  • @AshishSingh-vs8kb
    @AshishSingh-vs8kb 5 месяцев назад

    Question : i want to add 2TB of ssd storage on my raspberry pi 5 and i am using Geekworm M901 PCIe to M.2 Key-M NVMe SSD PIP TOP the current ssd WD-Blue - SN580 which i have does not shows up on pi OS after enabling in config.txt please help me to decide which should i purchase ?

    • @Geekworm
      @Geekworm 5 месяцев назад

      Hi, Please refer to this comment on wiki: wiki.geekworm.com/NVMe_SSD_boot_with_the_Raspberry_Pi_5#comment-4708

  • @nagantm441
    @nagantm441 5 месяцев назад

    Are there any differences in performance between this and the KVM-A8?

  • @rmkky2470
    @rmkky2470 5 месяцев назад

    do you provide heatsinks as well? because I can't see that on your website. also would the aluminum heatsinks fit in the case considering there is a fan there as well.

    • @Geekworm
      @Geekworm 5 месяцев назад

      Hi, 3pcs aluminum heatsink is included in the KVM-A3 kit.

    • @rmkky2470
      @rmkky2470 5 месяцев назад

      @@Geekworm there is a fan in there as well so would the heatsinks fit?

    • @Geekworm
      @Geekworm 5 месяцев назад

      @@rmkky2470 Yes, the 3pcs aluminum heatsinks fit.

    • @yipinghuang1853
      @yipinghuang1853 5 месяцев назад

      @@Geekworm The radiator we provide is relatively thin, so it can also be installed. The fan blows towards the radiator, and the heat dissipation effect will be better.

    • @rmkky2470
      @rmkky2470 5 месяцев назад

      @@Geekworm do the heatsinks come with thermal tape or thermal paste as well?

  • @markjones2349
    @markjones2349 5 месяцев назад

    I just ordered one. Can't wait to be able to use my old mini itx PC as a second server/nas as easily as my HPE MicroServer over the LAN.

    • @markjones2349
      @markjones2349 3 месяца назад

      Ended up that my mini itx case was not tall enough to fit the internal USB cable connector and still get the case on. Moved the build to an ATX case and all is working great. Now I want to buy a SuperMicro server board and max it out with RAM, CPUs, gpu or two for AI. This KVM-A8 is great!

  • @mtab2008
    @mtab2008 5 месяцев назад

    why you dont power it on and see from screen that if it is no problem?

    • @Geekworm
      @Geekworm 5 месяцев назад

      Good advice!

    • @adrianTNT
      @adrianTNT 15 дней назад

      The video would be too long, googling all the problems, ask on forums, order new compatible parts, etc 🤣

  • @yavuzkahraman7929
    @yavuzkahraman7929 5 месяцев назад

    can i do remote pc switching ?i want to switch remotely without pressing the button ?

    • @simonforest3572
      @simonforest3572 5 месяцев назад

      Yes, it's around 8:30 in the video, you have to press CTRL twice and press the number you want

  • @Persn-kun
    @Persn-kun 6 месяцев назад

    Is there a compatible m.2 hat for this?

    • @Geekworm
      @Geekworm 6 месяцев назад

      Sorry, no, there is no space for m.2 hat installation.

  • @Sup_D
    @Sup_D 6 месяцев назад

    Would it be possible to create a Dual Boot system with Pi OS on one drive and Android OS/TV on another?

    • @Geekworm
      @Geekworm 6 месяцев назад

      Hi, sorry, it is not supported.

  • @TheSizzleBeans
    @TheSizzleBeans 6 месяцев назад

    What is the predicted battery life at full power usage of the pi5, what is the overall rough hight with the m.2 adapter installed. could you provide a 3d model by chance?

  • @RiverDragonz
    @RiverDragonz 6 месяцев назад

    So I cannot use the official pi 5 power supply and fan?

    • @Geekworm
      @Geekworm 6 месяцев назад

      Of course, you can use official pi 5 power supply and fan.

  • @kieranj67
    @kieranj67 6 месяцев назад

    Great video 👍

    • @Geekworm
      @Geekworm 6 месяцев назад

      Thank you!

  • @paulohorran2691
    @paulohorran2691 6 месяцев назад

    Is there any case option with ups for orange pi 3b?

    • @TheSizzleBeans
      @TheSizzleBeans 6 месяцев назад

      Currently it seems they work primarily with raspberry pi. During my time looking into universal cases, I come across insect breeding tanks. They are ventilated, have a lid for easy installation and are dirt cheap. they're also plenty big enough for a ups or power bank with a buck converter.

  • @fredrikmardenfalkhoppe494
    @fredrikmardenfalkhoppe494 6 месяцев назад

    How about battery assembly? How about audio cable assembly? Heat sink assembly? Not mentioned at all, and not installed in the video. This is not a complete video. And for the updated board, this video is not updated..

  • @vituzzo1985
    @vituzzo1985 6 месяцев назад

    I've been looking for information on this solution for some time, so with x1202 UPS and nvme ssd does the RBpi5 work at full power with even 1.6 amps on the USB ports?? I would like to use this solution for an automotive application.

    • @TheSizzleBeans
      @TheSizzleBeans 6 месяцев назад

      VERY good question. I would presume it has to be that case if the power supply is 5v 5a since that is what we are told makes the pi run at max efficiency. since the power input is 5.1 volts and 5 a of the ups its a definate matchup for the full use of the pi. how long i could do this is a worry. i want at least a full 3/4 hour run time without having to plug in!

  • @galdakaMusic
    @galdakaMusic 6 месяцев назад

    Beatiful!!! Would be great one HAT with SSD and Hailo 8L for HAOS & Frigate full support. Greetings!!

    • @Geekworm
      @Geekworm 2 месяца назад

      Hi, you can stack the PICe HAT TOP such as X1015/X1004 above the X1201.

  • @H2Oredfirefox
    @H2Oredfirefox 6 месяцев назад

    Hi I have my Raspberry Pi five set up with the SD card is the os and I want to use the MM U as the storage device for the game ROMs and other stuff for some reason the Raspberry Pi five doesn't see the extra storage connected is there something I'm doing wrong🤔🤔🤔🤔🤔🤔

  • @johnathanjamesjohnsonjr7408
    @johnathanjamesjohnsonjr7408 6 месяцев назад

    ...🕶

  • @chrisumali9841
    @chrisumali9841 6 месяцев назад

    Thanks for the demo and info, have a great day