Видео

Tutorial on how to change out a damaged front panel on a Prober style test fixture. 1. Remove all but center and end screws along the top of the front panel 2. Remove gas spring 3. Remove Bed Of Nails Plate. 4. Set Bed Of Nails Plate upside down on tooling pins for protection. 5. Remove lid closure detection switch. 6. Remove Latch Mechanism. 7. Remove 3 screws on top of the front panel and 2 s...

Instructional video on how to align the Shielded Prober Bed of Nails test fixture. Alignment is a quick 6 step process: 1. Verify hinge has not loosened in shipping. 2. Remove shield cover. 3. Loosen adjustment screws. 4. Adjust so back is even, and edges are even around circuit board and tooling pins. 5. Tighten and verify alignment. 6. Replace RF Shield and verify proper operation. Tel: (831)...

Demonstration of the Prober Bed of Nails Test Fixture with Quick Change Rods plate for testing multiple products. This is a more efficient solution for testing multiple products. This is faster than re-adjusting the adjustable press plate each time and lower cost than changing the standard rod style press plates. Tel: (831) 763-2000 Web www.testelectronics.com

Demonstration of the Alligator Tri-Plate Double Sided Bed of Nails Test Fixture. Details of how to get inside the fixture to wire and to make modifications. Details on how to remove panels to drill, punch or cut connector holes. Details on how to access and replace test probes. Tel: (831) 763-2000 Web www.testelectronics.com New testelectronicscom.ipage.com (HTML5 only)

Demonstration the Tri-PLate Alligator style bed of nails test fixture. Demonstration covers basic usage. Demonstrates design techniques which allow easy updates and modifications to the fixture required to keep it current with ever changing board revisions. Also shows details of mounting the electronics hardware inside the fixture for portability and added protection out on the production floor...

Demonstration of how to change operator preferences using the preference menu. Tel: (831) 763-2000 Web www.testelectronics.com New testelectronicscom.ipage.com (HTML5 only)

Detailed description of a low cost programming fixture and how they are used. Tel: (831) 763-2000 Web www.testelectronics.com New testelectronicscom.ipage.com (HTML5 only)

Demonstration of the Top Press style lever actuated test fixture utilized for high precision. This Top Press style test fixture has parallel actuation like the Protector except that the board under test in compressed into the test pins from the top rather than up from the bottom like the Protector does. In some applications it is more beneficial for the top press action. In this case an RF conn...

Demonstration of the Top Press style lever actuated test fixture utilized for high precision. This Top Press style test fixture has parallel actuation like the Protector except that the board under test in compressed into the test pins from the top rather than up from the bottom like the Protector does. In some applications it is more beneficial for the top press action. In this case an RF conn...

Detailed disassembly demonstration of a Protector style test fixture utilized for high precision. This Protector is packed with electronics stacked on the inside and side panels which make access seemingly impossible. However, it is demonstrated that the innovative design provides complete access with the simple removal of some screws. Probing with a combination of 25mil center to center test p...

Demonstration of a low cost Rand test fixture using a sub plate similar to the Protector style fixture at 1/5th the cost. 20mil center to center spaced probes in an internal sub-plate raise to make contact to a flex cable to test an LCD display. Tel: (831) 763-2000 Web www.testelectronics.com New testelectronicscom.ipage.com (HTML5 only)

Demonstration of a simple side access bed of nails test fixture for zero insertion force probing a small fragile connector assembly. Side access fixtures can also be used to probe side connectors on circuit boards. Tel: (831) 763-2000 Web www.testelectronics.com New testelectronicscom.ipage.com (HTML5 only)

Demonstration of a single center gas spring to increase efficiency and testing speed by increasing the ergonomics and reducing operator fatigue. The center gas spring integral design is unobtrusive in that it doesn't hang off the sides instead is concealed inside the central rear area of fixture. Tel: (831) 763-2000 Web www.testelectronics.com New testelectronicscom.ipage.com (HTML5 only)

Demonstrates how independent test bays can absorb technician loading and unloading time into the test. The test starts as soon as the board is loaded. While the board is being tested other boards can be loaded and started. This saves a lot of time compared to the conventional method of rushing to load all 4 boards under one big press plate and then the technician just sits and waits while they ...

Scorpion Fault Finder for Overton Instruments

Protector Probing 25mil Centers and Connector probing

Probing Connectors and Fiber Optics Conformal Coated Board

Prober Test Fixtures Simple to more Complex

Mounting Data Acquisition boards in Test Fixtures

Data Acquisition, Check-MATE Multifunction DAQ Module

Prober Bed of Nails Pluggable Terminal Blocks

Prober Bed of Nails Tester Probing Techniques

Rand 14" Press Fixture Clamping Device

ProjectBox Wireless Fixture Kit

Prober Bed of Nails Tester Mounting Features Available

Prober Bed of Nails Tester configured as a Pre-Final Assembly Functional Tester

Anti-Static Protector Bed of Nails Test Fixture

Rand Bed of Nails Tester laser cut laser etched

Rand FixtureduinoMini 1 of 2 Hardware Demonstration