Видео

Hmmm not sure if you can buy just the tension piece but you could go to The Home Depot where I got this one & look where they have the door bells to see if they sell just the tension piece. If they don't have a tension piece I wonder if it would be possible to make one with a piece of sheet metal but I would just get the entire new door bell with the tension piece included & replace the entire door bell with a new one. I think they had gold color too if you don't want black. It was pretty easy to install if you watched the entire video. So your door bell is the very same style as this one? As they have different mounting types of door bells where some don't require a tension piece at all. This one happened to have a tension piece since there was just a round hole in the stucco to install it so I didn't want to get a different door bell with a mounting plate to then have to install on the stucco wall. My Motha's door bell was close to 17 years old or so & it had a short in it so I thought I would install this new one & have not had any issues since. Hope I at least gave you a few ideas. If you still have questions send me another message. Thanks for stopping by!

Here's another thought for you....get a new door bell with the tension piece & get a color you like....then just use the tension bracket for your old door bell if that will work & save the rest of the new door bell for later on down the road for when your old door bell stops working then remove the old door bell & save the tension piece & then install the new door bell with the tension piece...as a thought...! Let me know what you end up doing....VideoJoe WANTS to Know! LOL

You can tip one on it's side to get out of the box for sure but I would not store a new AC unit on its side prior to installing it for instance. This puppy ran great after I installed it. If you want to watch more of this project & similar ones then go to my main RUclips channel page then click on playlists & scroll down to AC units & you will find plenty of videos for you to learn more for removing an old one as well as installing a new one just like this one! Thanks again for stopping by!

Wow cool thanks for all the suggestions!

I've had to do this in two different condos & it worked like a charm both times. But of course you have to put floor sealer over the dirt or the dirt will wash off. If you don't want to put any sealer on then try old grease like in your garage under where you park the car & see if you can blend that in & it should stay without sealing the floor. Let me know how it works out for you. Thanks for stopping by!

Yes kind of tricky to reposition the fat wire to get it to fit through the notched out hole they have on the side of the face cover. You could cut that notch just a bit bigger as a thought. Let me know how you do...

This video was showing what termite poop looks like & how to go about finding it & I thought I was giving out some good advice......

Good luck with your repair. Let me know how it goes & thanks for stopping by!

So sorry you feel that way. This is just one video of many where I show how to fix sagging doors & other things having to do with doors. If you want to see more you can go to my main RUclips channel page then click on playlists & scroll down to doors. Thanks for your message...

You're welcome! Hey did you know that you can now find me (VideoJoe) on Roku?! VideoJoe has his own Roku TV channel & it's called "DIY for Beginners" what else LOL. If you have a Roku TV then just go to the search area & type in the channel & it should pop up & you can start viewing VideoJoe there right on TV while you sit in your favorite arm chair. Grab a bowl of popcorn & have at it because I know VideoJoe is always there to assist you with saving money around the house. Check him out on Roku! 😎🤓 I have more for the joist hangers & deck repairs so if you go to my main RUclips channel page then click on playlists & scroll down to dry rot deck repairs you will learn all kinds of things. Thanks again for stopping by!

Sure thing. You know I have found 3 different similar light fixture covers such as this with 3 different ways for them to come off so just take your time & figure out which one you have. Hey did you know that you can now find me (VideoJoe) on Roku?! VideoJoe has his own Roku TV channel & it's called "DIY for Beginners" what else LOL. If you have a Roku TV then just go to the search area & type in the channel & it should pop up & you can start viewing VideoJoe there right on TV while you sit in your favorite arm chair. Grab a bowl of popcorn & have at it because I know VideoJoe is always there to assist you with saving money around the house. Check him out on Roku! 😎🤓 Thanks again for stopping by!

LMAO! Hey did you know that you can now find me (VideoJoe) on Roku?! VideoJoe has his own Roku TV channel & it's called "DIY for Beginners" what else LOL. If you have a Roku TV then just go to the search area & type in the channel & it should pop up & you can start viewing VideoJoe there right on TV while you sit in your favorite arm chair. Grab a bowl of popcorn & have at it because I know VideoJoe is always there to assist you with saving money around the house. Check him out on Roku! 😎🤓 Thanks again for stopping by!

Wow you have lots of questions for sure! I will attempt to answer some of your questions....Hey did you know that you can now find me (VideoJoe) on Roku?! VideoJoe has his own Roku TV channel & it's called "DIY for Beginners" what else LOL. If you have a Roku TV then just go to the search area & type in the channel & it should pop up & you can start viewing VideoJoe there right on TV while you sit in your favorite arm chair. Grab a bowl of popcorn & have at it because I know VideoJoe is always there to assist you with saving money around the house. Check him out on Roku! 😎🤓 OK so I have lots of different ceiling fan videos on my channel & you had said you watched a few (thanks!) but I have lots. The best way to find them would be to go to my main RUclips channel page then click on playlists & scroll down to ceiling fans to learn more. So I understand you want to install a ceiling fan where there is not a ceiling fan now. In lots of bedrooms there might be a light fixture where they might have also run an additional wire for a light kit for a ceiling fan that is if you remove the light fixture then install the ceiling fan right there & if they did your house this way then they probably installed a heavier box to hold a ceiling fan but of course you would have to check that on your own for that. Now if you don't have anything up at the ceiling then you would probably have to install an additional light switch next to the existing light switch you should have in the room by the door. Then you would need to remove the existing light switch so you could then remove the existing wall switch box so that then you could cut that hole bigger to make it a 2gang light switch box for the additional light wall switch to power the ceiling fan. Now you have a hole in the wall where you can fish a wire from there on up to the ceiling fan. If you have an attic you might get lucky to drill a hole in the attic at the wall top plate to then fish a new wire down to the wall switch box without having to cut any drywall at all. I have videos where I show removing a 2gang light switch box to install a 3 gang light switch box then I show how I ran the wire up to a new ceiling fan in a bathroom & how I did that with cutting out drywall & installing the wiring etc. since the ceiling did not have an attic above but if you have an attic above then maybe you don't have to cut any drywall at all. As for the ceiling fan box you will need to install sometimes you can mount right next to any existing ceiling joist & the ceiling fan will still be pretty close to where you want it since most ceiling fans aren't installed in an exact place anyway but if you really need it to be perfect & if you don't have a ceiling joist right there then you would have to add a wood block up there or install a ceiling fan heavy box on a metal slide rail that then attaches to the wood ceiling joists & they have those at the hardware store too. Will that help? Send me more questions if need be but lots of your questions will be answered by watching all of the ceiling fan videos in the playlists area on main RUclips channel page. Check those out ok? Good luck with your project & if you send me more questions I will get back to you. Thanks again for stopping by!

When I pressed the test button then the other button clicked & snapped out & that's what I heard not a buzzing noise...Hey did you know that you can now find me (VideoJoe) on Roku?! VideoJoe has his own Roku TV channel & it's called "DIY for Beginners" what else LOL. If you have a Roku TV then just go to the search area & type in the channel & it should pop up & you can start viewing VideoJoe there right on TV while you sit in your favorite arm chair. Grab a bowl of popcorn & have at it because I know VideoJoe is always there to assist you with saving money around the house. Check him out on Roku! 😎🤓

Not sure exactly as this carpet was here when we moved in. It really has lasted pretty good though....Hey did you know that you can now find me (VideoJoe) on Roku?! VideoJoe has his own Roku TV channel & it's called "DIY for Beginners" what else LOL. If you have a Roku TV then just go to the search area & type in the channel & it should pop up & you can start viewing VideoJoe there right on TV while you sit in your favorite arm chair. Grab a bowl of popcorn & have at it because I know VideoJoe is always there to assist you with saving money around the house. Check him out on Roku! 😎🤓 Thanks for stopping by!

Nice going to check the spacing....! Hey did you know that you can now find me (VideoJoe) on Roku?! VideoJoe has his own Roku TV channel & it's called "DIY for Beginners" what else LOL. If you have a Roku TV then just go to the search area & type in the channel & it should pop up & you can start viewing VideoJoe there right on TV while you sit in your favorite arm chair. Grab a bowl of popcorn & have at it because I know VideoJoe is always there to assist you with saving money around the house. Check him out on Roku! 😎🤓 Good luck with your project!

Dude so awesome to hear! Thanks for stopping by! Hey did you know that you can now find me (VideoJoe) on Roku?! VideoJoe has his own Roku TV channel & it's called "DIY for Beginners" what else LOL. If you have a Roku TV then just go to the search area & type in the channel & it should pop up & you can start viewing VideoJoe there right on TV while you sit in your favorite arm chair. Grab a bowl of popcorn & have at it because I know VideoJoe is always there to assist you with saving money around the house. Check him out on Roku! 😎🤓 See you next time!

It just depends how big the stone is as the very first time you get one it will be smaller in size. If you continue to get kidney stones then pretty much each time you get them again they will be bigger in size. At least that's what I was told so of course that means some people can pass them with no real issue while others it may be very painful while others might not be able to pass them at all & that's the time you have to go to the hospital for them to remove them there so I would say each person will get different results. Hey did you know that you can now find me (VideoJoe) on Roku?! VideoJoe has his own Roku TV channel & it's called "DIY for Beginners" what else LOL. If you have a Roku TV then just go to the search area & type in the channel & it should pop up & you can start viewing VideoJoe there right on TV while you sit in your favorite arm chair. Grab a bowl of popcorn & have at it because I know VideoJoe is always there to assist you with saving money around the house. Check him out on Roku! 😎🤓 Watch & learn as VideoJoeShows you what VideoJoeKnows...thanks so much for your message!

Even with the sniffling I thought I would make this video anyway since I didn't know when I would have a door like this again. Hey did you know that you can now find me (VideoJoe) on Roku?! VideoJoe has his own Roku TV channel & it's called "DIY for Beginners" what else LOL. If you have a Roku TV then just go to the search area & type in the channel & it should pop up & you can start viewing VideoJoe there right on TV while you sit in your favorite arm chair. Grab a bowl of popcorn & have at it because I know VideoJoe is always there to assist you with saving money around the house. Check him out on Roku! 😎🤓 Watch & learn as VideoJoeShows you what VideoJoeKnows... I hoped you learned some still in spite of it all! Thanks for stopping by!

So far so good with no leaks since I made all the repairs to the dryrot deck. I made an entire playlist for just all the work I did on the deck & you might want to check those out to learn more of all I had to do which then might assist you for sure. Go to my main RUclips channel page then click on playlists & scroll down to dryrot deck repairs or something like that. Hey did you know that you can now find me (VideoJoe) on Roku?! VideoJoe has his own Roku TV channel & it's called "DIY for Beginners" what else LOL. If you have a Roku TV then just go to the search area & type in the channel & it should pop up & you can start viewing VideoJoe there right on TV while you sit in your favorite arm chair. Grab a bowl of popcorn & have at it because I know VideoJoe is always there to assist you with saving money around the house. Check him out on Roku! 😎🤓 Watch & learn as VideoJoeShows you what VideoJoeKnows... Thanks again for stopping by & let me know what you end up doing for your deck repairs.

It must be your ballast then but the few times I had to change a ballast when I would put one new light bulb in it wouldn't even come on at all but if you put a new bulb in & it immediately burns out then I would think it's a ballast unless you have a different thing going on with your existing wiring like a loose wire nut in the ceiling junction box for instance. You could remove the entire light fixture from the ceiling then see if all the wire nuts are tight with no loose wires or see what else might be going on like a rat chewing through your wire just a bout all the way in the ceiling then when you turn the light switch on it burns a light bulb out....? Check it out & let me know what you find! Hey did you know that you can now find me (VideoJoe) on Roku?! VideoJoe has his own Roku TV channel & it's called "DIY for Beginners" what else LOL. If you have a Roku TV then just go to the search area & type in the channel & it should pop up & you can start viewing VideoJoe there right on TV while you sit in your favorite arm chair. Grab a bowl of popcorn & have at it because I know VideoJoe is always there to assist you with saving money around the house. Check him out on Roku! 😎🤓 Watch & learn as VideoJoeShows you what VideoJoeKnows... thanks again for stopping by!

Yes that's a fact. Always turn the power off first of course....did I miss that on this video?!! I might have made an introductory preview video before this one where I said it I can't recall now as it was so long ago.....but still teaching people how to save money around the house! Thanks for stopping by yo!

Hey did you know that you can now find me (VideoJoe) on Roku?! VideoJoe has his own Roku TV channel & it's called "DIY for Beginners" what else LOL. If you have a Roku TV then just go to the search area & type in the channel & it should pop up & you can start viewing VideoJoe there right on TV while you sit in your favorite arm chair. Grab a bowl of popcorn & have at it because I know VideoJoe is always there to assist you with saving money around the house. Check him out on Roku! 😎🤓 Watch & learn as VideoJoeShows you what VideoJoeKnows...

Awesome to hear! Thanks for listening to what I had to say then applying it to you! I have lots of other inspirational readings on my channel to learn more. Just go to my main RUclips channel page then click on playlists then scroll down to inspirational & you will find all kinds of videos that will interest you for sure. Keep it going!

Hey did you know that you can now find me (VideoJoe) on Roku?! VideoJoe has his own Roku TV channel & it's called "DIY for Beginners" what else LOL. If you have a Roku TV then just go to the search area & type in the channel & it should pop up & you can start viewing VideoJoe there right on TV while you sit in your favorite arm chair. Grab a bowl of popcorn & have at it because I know VideoJoe is always there to assist you with saving money around the house. Check him out on Roku! 😎🤓 Watch & learn as VideoJoeShows you what VideoJoeKnows...

@@videojoeshows I tried to but I need to get my account on TCL ROKU 43 TV but I found on my phone but it doesn't let me in it

@@videojoeshows I found it on my phone I checked on my 43 TV TCL ROKU didn't come out I put add a channel on it maybe next time I'll find it

@@videojoeshows I don't save money my stepmom does to pay for our house not me

Hey glad to hear that this video was helpful to you! I have lots of electrical videos on my channel for you to learn more from for sure. The best way to find them is to go to my main RUclips channel page then click on playlists & scroll down to electrical. I think I have one there too that shows what to do with short wires too. You would need to make some pigtails to extend those wires so you can work on them more easily & to connect them to your outlets or switches whatever.....Hey did you know that you can now find me (VideoJoe) on Roku?! VideoJoe has his own Roku TV channel & it's called "DIY for Beginners" what else LOL. If you have a Roku TV then just go to the search area & type in the channel & it should pop up & you can start viewing VideoJoe there right on TV while you sit in your favorite arm chair. Grab a bowl of popcorn & have at it because I know VideoJoe is always there to assist you with saving money around the house. Check him out on Roku! 😎🤓 Watch & learn as VideoJoeShows you what VideoJoeKnows...

Yes probably & one day this blind will fail but for the time being I made it work. Thanks for stopping by!

Haha....the reason why I don't use a sledge hammer is because then I will have to patch & repair the wall. The way I remove a junction box when I get done with the entire project it will look like I was never there!

Wow thanks for the info.. Make today great!

Nice thought. Thanks for stopping by!

Thanks! Make today great!

Thanks for stopping by!

Let's hope he gets his act together....

Stay positive & know that you are on the right track...

@@videojoeshows I know thank you

Haha watch more videos & the more you watch the more you'll save for sure. Go to my main RUclips channel page then click on playlists & scroll down to see all the things you could be saving on around the house. Keep it going!

LOL That's why I could never have been a woman!

Yes they are for a storage room...right?

@@videojoeshows yes it is

Thankfully the fluorescent light cover doesn't have a hole in it I have a picture of the fluorescent light that has a hole on it I don't fix lights I just watch

@@tiffanydeleon3681 Keep it going....

@@tiffanydeleon3681 Well thanks for watching my videos as I'm sure you are being entertained as well as learning some new things too. Nice!

LMAO I think I was giving you some good info on this video about fixing sagging doors & of course I have lots of sagging door videos for more learning,. Go to my main RUclips channel page then click on playlists & scroll down to doors to see all the ways you can fix your door. Thanks for stopping by!

Geez not sure what the actual size is but make sure your allen wrench fits in there nice & tight & not a sloppy fitting one so it doesn't slip off when tightening for sure. Thanks for stopping by! I have other videos that show you more for these hinges if you want to see more. Just go to my main RUclips channel page then click on playlists & scroll down to doors. Thanks again for stopping by!

Wow I was lucky to just ever have one! So sorry! Let me know more about the jump & bump method & if it works for you!

LMAO of course I have more videos that will show you more for painting this exact railing with this same painter's mitt. Go to my main RUclips channel page then click on playlists & scroll down to painting. Thanks for stopping by!

As for needing more paint I should have gotten two quarts when I was at the store & if I only needed one I could take back whenever. Instead I had to run back to the store same late afternoon to get back to finish this railing prior to getting too dark since I didn't want to have to come back next day to finish. That would be a very good tip for you so hopefully that will stick in your mind at least for watching this particular video!

Thanks for stopping by!

So sorry you have had issues with kidney stones for so long! I hope you don't get anymore....!

Yes I would agree with you. Thanks for your message!

That title came with a question mark for sure. If you want to see how to adjust spring loaded hinges you can always go to my main RUclips channel page then click on playlists & scroll down to doors & there will be some videos in there for it. Maybe I can change your mind! Thanks for stopping by!

Are you just referring to the handle that is loose like the way the one on the video was loose?....or is the entire base of the body of the handle assembly loose? If it's just the lever on the handle then try loosening the set screw first to see if it will in fact move then try to tighten then back off then tighten again to see if it will go tighter with the though thinking it could be rusted in place....? Let me know how you do but it would seem to me the set screw should make your door handle get tighter for sure....

@@videojoeshows Hey Joe thanks for getting back. Yes, the handle is loose exactly the same way as yours. Found the right Allen key, I mean it fits snug in there but it won’t budge either to tighten or loosen and that’s both sides. The door is only a couple years old, no rust. Still looks new. What the hey? 🤔😂 Those holes have to be there for a reason I reckon. WD-40 or something to loosen those screws up?

Haha these are my average Joe tools to where any average Joe can do this project using the tools I show. I can pretty much do anything with my tools I need. Yes the entire Old Lahaina was wiped out & I got that shirt in Lahaina when I used to live there just two blocks walking distance to Front St. Lahaina down by the Wharf. In fact the entire condo complex all 188 units & all other buildings on property were burned right down to the ground just like everything else!

Yes teeth per inch....did I say BPI instead of TPI with you thinking you heard me say a B instead of a T? Yes you are correct for teeth....

@@videojoeshows I figured that since you kept calling them "blades", you would probably use the terrm "Blades per inch" (BPI). Only because you just recently discovered the directional arrow on the blade have you discovered which way the blade cuts? If the arrow is worn off, just run the blade against a fingernail - either it tends to catch or it slips by.

@@usernamemykel Nice thought for sure. Thanks for the return messages! Keep it going!

Also I have probably removed about 100 outlet boxes this very same way & works great!

@@videojoeshows Fact is, at 79 years of age, I've never seen or heard of any man using a hacksaw blade without a handle. Usually, they are bought together, and used together. You are, as they say "unique". Hopefully the gloves you use are slash resistant, as are woodcarvers gloves.