Видео

Would this kit allow me to do more than one function at once with a grapple? For example can I lift or lower loader arms while opening or closing or curling a grapple? I have a 3032e and looking at this kit. Does the 3032e have enough hydro flow to allow multiple functions?

Now its MID OCTOBER andddd????

Can you post the link to the hydraulic cylinder? Have a 305 that’s needs to be replaced

Is the curl function any slower?

Do they have this for the 2016 bx25d

14 pto HP on a 1023 🤣🤣🤣 THATS CRAZY

How about the bx25d

So for the 4 new cylinders and the hydros plus pump you're almost $4k?

I didn't even know that!!! How's the 3039R testing going?

Take my money! 😁

Where i can get the kit and how much it cost ?

In the case of skid-steers the lift geometry is designed so it naturally tilts less going up/down than typical loaders do like on your 1025R. That's kind of what these need but the amount of added weight+space with the big links needed under the arms could be problematic, it would really split the difference though where your load at bottom is level, then at 3' high is inclined 10° then at 6' high is 20° etc with plenty of adjustability at any point to tweak your load as needed in between.

Will I be able to add the fittings later I want to do the loader before winter and add the others in the spring

Great job and very impressive!

Badass

You need to shut up and get on with the install

I have a b2400 and I’m wanting to put a turbo on it. Can you make a manifold for it. Thanks

Are they the same engine? I thought the 3039r engine was slightly different than the 2038r…

When are you going to have some available?

I installed the stage #3 & the HydrosPlus lift cylinders on my 2022 JD 1025R. I cannot begin to express how much more my little buddy can lift now!. Totally a different experience when using the tractor. I also checked the pressure relief valve setting from the factory and I found that it was set on the light side (1800 psi) Adjusting this to 2000 did not help. All things considered, after install the new cylinders & the HydrosPlus stage #3 pump, I can lift around 2600 Lbs ( actually, it is closer to 3000 but I don't want to mislead anyone) I am using an oil filled gauge, inline, to monitor the psi I clear cut 3 acres and I was not able to move some of the large tree trunks (4' across and averaging 7' in length) I can now move them with ease This is at 2000 RPM. Also, I find I now can do a lift+curl+close the gripper jaws, all at the same time! No need to wait for a function to complete before asking for another function to be used Take it from me, this is the best thing I have ever done for my tractor, it now works like it should

Kevin, thank you for your support and the much-needed solutions for the sub and compact tractors!!! I just finished installing everything. The stage 3, BH, and FEL cylinder upgrades and you were not kidding. These upgrades are the truth!!! I am no longer pursuing a track hoe, skid steer, or dingo. In MA, we need subcompact size to work on our subcompact yards. Until now subcompact = subpar, but not any longer!!! You've saved me a ton of money!! Thank you! Next, please build as quickly as you can, a power rake that runs on a SCV, a manual flow divider with flat face couplers, and some tubing for the BH to turn it into a much quicker "quick change" than what JD has engineered. You are a great functional and design engineer. Thanks again. Oh yeah, anything you can do to get help removing the noisy flow restrictor from the FEL?

Couplers arrived quickly, easy install minus the snap rings. Great product.

Will a 260B fit on a 2015 1025r that currently has a 260 on it?

Claims 70% horsepower increase..what that doing to the rest of the parts that are not engineered for that?

Anxious to see how the performance compares to the baseline

I lift and move a TON of Pellets, ON a skid, on Forks with my Hydros plus Kit on my 3025E /300 loader. I can take them right outta my truck and put them in garage or shipping container, or pick them up and move them around.. Hydros plus was Key to keeping me in a tractor that fits under a 7 ft garage door. Best money I ever spent! ( yes I added a ballast box extension and plenty of extra weight)

Take it from me, this upgrade is a game changer. I've had my 2020 1025R in some crazy situations and I've been less than happy with it's performance. At 200 Hrs, it has never failed to run but it also has never performed like it does now,, after the HydrosPlus & HydrosPlus Lift installs. I can now get true -3- action movements and I can also lift a black locust log, 3 1/2' across and 7' long!! No strain.... We have clear cut 3 acres of woods and the JD was never a trouper like he is now, wish I had found HydrosPlus much sooner If you were like me, I was always trying to tear the joystick off in order to get the loader to just move! My little buddy is now what I had always thought he could be!

Those are awesome numbers for the front. Does any of your add ons help the 3 point rear lift?

What is your plan for all of the heat your adding to the hydraulic system? What is the plan for the front axle assembly? I'm sure you're exceeding John Deeres rating .

😎🇺🇸. All these mods are game changing

I need something like this for my badboy 3026

Great job!

The front 3rd QD's are 1/4" from JD, they have -06 ORB thread on the hardlines.

Excellent upgrade for the 3x20/4x20 and 3R/4R machines!

Love mine. 10X better than OEM 260B please soon

Forgive me if this is an obvious question: Will these bigger couplers work on the 270b backhoe lines?

Sir, any guess if these cylinders will work on the H130 loader?

Glad I watched till the end. lmao, nicely done.

Looks proper with the bigger cylinders on the backhoe. Very pleased with mine

Outrigger stabilizer cylinders are rebuildable.

Just wanted to see how the pump and cylinders are coming along for the 3R tractors. Really excited to see it happen!

Also pounding on the grease zerk to seat the pins could damage the zerk.

Before using the flap disk to clearance for the cylinders, you should cover the exposed hose ends to avoid contamination!

Is there still a benefit to installing your plus cylinders if you don’t have any of the other upgrades? For example if you don’t have the hydros plus stage one two or three pump is there any point in just replacing the cylinders if your tractor is otherwise stock?

❤

Do you have to have the turbo kit with stage 3

Potentially dumb question - if the PTO on the 1/2025R is hydraulic, would this modification increase the PTO HP? Or is something else the limiting factor?

hows that turbo coming for 3E ? have you found any frame ect wear from 3E hydraulic upgrade with pump and 2" cylinders

I can't remember what I have...9.5 GPM...Is that stage 2 ?

Tank you for the vidéo! ! John!